• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1502-1509
• /
• 2006

본 논문에서는 최근 홈 네트워크 기술로 관심을 받고 있는 IEEE 802.15.3 HDR-WPAN (High Data Rate-Wireless Personal Area Network) 시스템의 성능 및 용량 향상 방안으로 MIMO 기법을 적용하고 컴퓨터 시뮬레이션을 통해 성능을 분석하였다. 특히, MIMO 기법 중 독립적인 각각의 부채널들에 서로 다른 데이터를 전송하여 전송률을 높이는 V-BLAST 기법을 적용하였다. HDR-WPAN 시스템의 TCM-64QAM 모드에서 V-BLAST 기법을 적용한 경우 최소 2개의 송수신 안테나를 사용하는 것으로도 대역폭 확장 없이 110Mbps 이상의 전송속도를 얻을 수 있었으며, 레일리 페이딩 채널에서 송신 안테나 2개, 수신 안테나 2개를 사용할 경우 약 $E_b/N_0=35dB$ (MMSE 알고리즘)에서 10-4의 BER 성능을 얻을 수 있었다. V-BLAST 기법을 적용한 HDR-WPAN 시스템은 수신단에서 복조 순서(ordering)를 결정하는 과정이 다소 복잡하지만 추가적인 대역폭 확장 없이 데이터 스트림을 다수의 안테나로 전송하여 전송 용량 및 성능을 높일 수 있었다.

• 한국통신학회논문지
• /
• 제33권12A호
• /
• pp.1251-1260
• /
• 2008

Diffuse wireless optical communication offers more robust optical links in terms of coverage and shadowing than line-of-sight links. However, traditional diffuse wireless infrared (IR) transceiver systems are more susceptible to multi-path distortion and great power decrease, which results in limiting high-speed performance. Multi-beam is an effective technique to compensate for multi-path distortion in a wireless infrared environment. The goal of this paper is to analyze the transmission characteristics by replacing traditional diffuse system (TDS) which contains single wide angle transmitter and single element receiver by system consisting of three-beam transmitter and non-imaging receiver (TNS) attached with compound parabolic concentrator (CPC). In the simulation, we use the recursive model developed by Barry and Kahn and build the scenario based on 10 different cases which have been listed in Table 1. Moreover, we also check the reliability of the TNS diffuse link channel by BER test on the basis of different receiver positions and room sizes. The simulation results not only show the basic transmission characteristics of TNS diffuse link, but also are references to design more efficient and reliable indoor infrared transmission systems.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1365-1373
• /
• 1999

In many countries including Korea, in order to transmit the more electric power, the higher transmission line voltage is inevitable. So, a rapid reclosing scheme is important for EHV/UHV transmission lines to ensure requirements for high reliability of main lines. A critical aspect of reclosing operation is the extinction of the secondary arc since it must extinguish before successful reclosure can occur. Therefore the accurate simulation techniques of arcing faults are of importance. And successful reclosing switching can be accomplished by adopting a proper method such as HSGS and hybrid scheme to reduce the secondary arc extinction time. First of all, this paper discusses a suggested arc model, which have time dependent resistance for primary arc and piecewise linear approximated arc model for secondary arc. And this simulation technique is applied to Korean 765 kV transmission lines. Also hybrid scheme is simulated and evaluated for the purpose of shortening dead time. For adaptive reclosing scheme, variable dead time control algorithm is suggested. Two kinds of algorithm are tested. One is max tracking algorithm and the other is rms tracking algorithm. According to simulation results, rms tracking has less errors than max tracking. Therefore rms tracking is applied to Korean 765 kV transmission lines with hybrid scheme.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.53-58
• /
• 2016

The underground transmission lines which have been built to expand the suppling facilities will be continuously accompanying with high growth of the increase of power demand in the metropolitan area in recent years. So, it is necessary to maximize the ability and reliability of power supply with the current-carrying capability of the underground transmission lines. Design criteria of KEPCO is to be presented and used frequently. But it has to be studied about the installation methods of power cable buried in ground. In this study, we used the program for calculating the current-carrying capability of underground transmission power cables. We estimated the maximum permissible current values by the horizontal arrangement in the installation methods of power cable(154kV XLPE $600mm^2$) buried ducts in ground. To see the general tendency of the analysis, we researched a statistical analysis with such parameters as the maximum permissible current values. Through the regression analysis, we analyze the most highly values of the maximum permissible current on the Ra type duct arrangement.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.45-50
• /
• 2008

Many applications of sensor network require connection to the Internet. The transmission protocol of traditional sensor network was designed within the sensor network itself. However, based on 6LoWPAN which can be accessed using IPv6, direct connection is possible between the sensor network and the TCP/IP network outside. Transmission of data in applications of sensor network falls into two main categories. One is a small packet that is periodically produced such as packet related to temperature and humidity. The other is a relatively large packet that brings about network overheads such as images. We investigated the conformance test and pros and cons of application data over the transmission protocol of Zigbee and 6LoWPAN. As a result, both Zigbee and 6LoWPAN have shown low rate of loss for periodic data and have in creased reliability of data transfer. When transmitting streaming image data, both ACK, non ACK mode of Zigbee and UDP of 6LoWPAN minimized transmission time but suffered the consequences of high packet loss. Even though TCP of 6LoWPAN required a long transmission time, we were able to confirm that no loss has occurred.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.658-664
• /
• 2018

In this paper, we propose a group key management scheme for very high confidential information in tactical wireless networks. For the proposed scheme, we consider the tactical networks that has a hierarchical topology and the nature of high confidential information. The leader node, which may have higher probability of good channel state than others, provides some data to all the network member in order to generate a geographical group key and it transmits the encrypted information with minimum transmission power level to others. By this scheme, the security and reliability for sharing confidential information is ensured. The performance of the proposed scheme is validated by mathematical analysis. It shows that the proposed scheme makes nodes to share a high confidential information securely if the proper parameters for network design are selected.

• 디지털콘텐츠학회 논문지
• /
• 제18권6호
• /
• pp.1193-1198
• /
• 2017

본 논문에서 개발된 IGBT 구조는 DC 송배전을 위한 고전력 스위치 반도체로서 사용되며, 빠른 스위칭 속도 및 개선된 항복전압 특성을 확보하여, 향후 신재생 장거리 DC 송전을 위한 중요한 전자 소자로서 이용될 것이 기대되고 있다. 새로운 타입의 차세대 전력 반도체로서, 스위칭 속도를 향상시키면서 동시에 항복 전압의 특성을 개선시켜, 전력 손실 특성을 줄이도록 설계되었고, 높은 전류 밀도의 장점을 동시에 획득 가능하다. 이러한 개선된 특성은 Planar IGBT의 N-drift 영역에 $SiO_2$를 추가로 도입함으로서 얻어지며, Sentaurus TCAD 시뮬레이션 툴을 사용하여, 비교 분석하였다.

• 한국통신학회논문지
• /
• 제30권12C호
• /
• pp.1208-1213
• /
• 2005

최근 초 광대역(UWB) 시스템은 높은 데이터 전송율과 낮은 전력소모로 IEEE 802.15.3a에서 표준안으로 고려되고 있다. IEEE 802.15.3a에서 고려되고 있는 시스템 중에, 직접 확산초 광대역 통신(DS-UWB)은 UWB의 이점과 특성을 잘 이용한 시스템이라 할 수 있다. 하지만, DS-UWB의 에러율과 전송 용량은 다중 페이딩 채널에 의해 많은 제한을 받고 있다. 전송 용량과 에러율의 감소를 극복할 효과적이고 강력한 기법이 다중 안테나를 이용한 방법이라 하겠다. STBC는 전송 신호의 안정성 향상에 중점을 둔 시스템이지만, 전송율이 떨어진다. 그러나, V-BLAST는 전송 신호의 안정성은 떨어지지만, 전송율의 향상을 가져올 수 있다. 본 논문에서는 M진 DS-UWB에서 채널 용량을 높이고 안정성을 확보하기 위한 적응 다중 안테나 전송 기법을 제안한다. 제안된 시스템은 STBC와 V-BLAST의 한계점인 에러율과 처리량을 극복할 수 있는 장점을 가지고 있다. 이를 컴퓨터 모의실험으로 검증하였고 분석하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.407-410
• /
• 2007

In the RRH (Radio Remote Head) of a WCDMA Node B System, an HPA (High Power Amplifier) is used in order to amplify the transmission RF signal. Upon designing an HPA, the design requirements demand that the intermodulation characteristics are optimized during design and that the stability of the characteristics is maintained in the field. In this DOE (Design of Experiments) research, a few vital factors that affect intermodulation characteristics were first selected; then, an optimal solution was produced for high reliability in a noisy environment in the field by employing the Taguchi Method, a statistical method used for a robust design. Furthermore, by employing HALT(High Accelerated Life Test) during the verification test, this experiment has verified that an HPA that was designed using the Taguchi Method proved to be a far more robust design than an HPA that was designed without using the method.

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6838-6844
• /
• 2014

LTE-A 시스템은 고속 데이터 전송을 위해 다중안테나를 장착하고 있다. 일반적으로 공간다중화 다중안테나 시스템의 수신기 복잡도는 후보벡터의 개수에 따라 증가한다. 후보벡터의 개수가 증가함에 따라 연판정 값의 신뢰도가 향상된다. 많은 수의 후보벡터를 생성하는 최우도 신호검출방식을 사용하면 우수한 성능을 달성할 수 있다. 반면 적은 개수의 후보벡터를 생성하는 저복잡도 수신기는 신뢰도가 낮은 연판정 값을 생성한다. 본 논문에서는 적은 수의 후보벡터를 사용해서 얻게되는 연판정 값의 신뢰도를 향상시키는 새로운 기술을 제안하고 모의실험을 통해 개선된 성능을 확인한다.