• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.250.2-250.2
• /
• 2014

Currently, teeth whitening method which is applicable to dental surgery is that physician expertises give medical treatment to teeth directly dealed with a high concentration of hydrogen peroxide and carbamide peroxide. If hydrogen peroxide concentration is too high for treatment of maximized teeth whitening effect [1], it is harmful to the human body [2]. To the maximum effective and no harmful teeth whitening effect in a short period of time at home, we have observed the whitening effect using carbamide peroxide (15%) and a low-temperature atmospheric pressure plasma jet which is regulated by the Food and Drug Administration. The gas supplied conditions of the non-thermal atmospheric pressure plasma jet was with the humidified (0.6%) gas in nitrogen or air at gas flow rate of 1000 sccm. Also, the measurement of chemical species from the jet was carried out using the optical emission spectroscopy (OES), the evidence of increased reactive oxygen species compared to non-humidified plasma jet. We have found that the whitening effect of the plasma is very excellent through this experiment, when bovine teeth are treated in carbamide peroxide (15%) and water vapor (0.2 to 1%). The brightness of whitening teeth was increased up to 2 times longer in the CIE chromaticity coordinates. The colorimetric spectrometer (CM-3500d) can measure color degree of whitening effect.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.183-190
• /
• 2002

In order to reduce NOx emissions in the 20kw class microturbines under development, the low NOx characteristics, as being an application to the lean premixed combustion technology, have been investigated. The study has been conducted at the conditions of high temperature and pressure. Air from a compressor with the temperature of 500K to 650K and the pressure of 0.3bar gauge to 0.7bar gauge, was supplied to the combustor through an air preheat-treatment. Sampling exhaust gases were measured at the immediate exit of the combustor. for the effect of temperature on NO and CO emissions. though NOx was increased, CO was decreased with increasing inlet air temperature. With increasing inlet air pressure, NOx and CO were increased also. NOx was decreased, but CO was increased with increasing inlet air mass flow rate. The test has been performed on the equivalent ratios of 0.10 to 0.25 in a lean region. NOx was increased with increasing equivalent ratios, but CO was decreased as an influence of flame temperature. In the very lean region of the equivalent ratio below 0.12, CO was increased suddenly, due to instability. As the results of this study, NOx and CO are found to be reduced to the similar level at the same time when operated at optimal conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.425-431
• /
• 2009

To provide fundamental educational materials for the effective management of patients with high blood pressure and diabetes in korea, and to expand the scope of such educational businesses the survey was administered between September 2007 and February 2008 to 1,213 consenting patients suffering from high blood pressure and diabetes in private medical centers within Daejeon in Korea. The patients were provided with standardized education materials and were monitored whether they were conducting a controlled management of their blood pressure and diabetes level as well as monitoring changes in their daily routine. Out of the 1,213 patients, 51.3% of the patients suffered only from high blood pressure, 26.3% suffered only from diabetes and 22.4% suffered from both high blood pressure and diabetes (Condor difference was not considered in this research). Physical education was the most commonly used education upon visitation to these medical centers, which was then followed by eating habits and weight management, respectively. The education demanded and preferred from the patients was similar to the education provided during the visitations. 56.7% of the medical doctors responded that the majority of the patients were passive in controlling and managing their illnesses. 63.7% of the participants believed that the education provided through this research was effective.

• Clinical and Experimental Pediatrics
• /
• v.52 no.7
• /
• pp.745-751
• /
• 2009

Hypertension is a major risk factor for myocardial infarction, stroke, and cardiovascular mortality in adults; its treatment reduces the risk of cardiovascular events. In recent times, attention is being paid to monitoring of blood pressure from childhood to adulthood. Childhood hypertension is associated with hypertension in later life, and early intervention is important. In the Korean socioeconomic background, a rapid increase is observed in the number of obesity cases and the rate of increase in the incidence of obesity is more in childhood. The strong association of high blood pressure with obesity and the marked increase in the incidence of childhood obesity indicate that both hypertension and prehypertension are becoming significant health issues. In this comprehensive review, we acquaint the clinician with the available literature on childhood hypertension to provide recommendations for the diagnosis, evaluation, and treatment of hypertension based on the available evidence and consensus in Korean clinical conditions.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.11a
• /
• pp.135-138
• /
• 2002

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.7-16
• /
• 2008

Limestone area have mostly certain geological defects such as the internal cavities due to melting and fractured zone by external pressures. Especially, in case of constructing grand bridge, the treatment of the limestone cavities area having the geological defects is inevitable. In order to reduce foundation settlement and to reinforce the ground in the limestone cavities area, high pressure jet grouting has been carried out as a countermeasure method. Despite the fact that high pressure jet grouting method has already adopted at a lot of limestone cavities area, but the amount of research and technical data on the high pressure jet grouting have not been accumulated properly so for. Therefore this paper intends to investigate the strength characteristics and deformation characteristics for reinforced limestone cavities area by high pressure jet grouting method. In addition, load carrying capacity obtained by static pile load test with load transfer measuring system is analyzed.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.587-592
• /
• 1996

Effects of high pressure on the inactivation and microstructure of Candida tropicalis (C. tropicalis) were in vestigated. High pressure inactivation of C. tropicalis was a first order reaction. The decimal reduction time (D value) at 400 MPa was 1.4 min at $25^{\circ}C$ and z value was 100 MPa. The effect of high pressure treatment was higher when treated at $45^{\circ}C$ than at $25^{\circ}C$. Damages in mitochondrial membrane and cell wall of C. Tropicalis were observed when it was pressurized at 400 MPa for 10 min. It indicates that high pressure affects the membrane system of the cell and causes the inactivation of C. tropicalis.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.48-49
• /
• 2003

In the present research a high order Gudonov-type method has been used for the simulation of very high pressure flow fields, as well as the capturing of strong shocks, which usually occur in explosion of high explosives. The treatment strong shocks and the flow field behind the shocks needs a very high resolution scheme. To resolve accurately the shock and the release waves behind the shock the piece­wise parabolic method (PPM) of Colella [1] was utilized in this research. A major problem which encountered in very high pressure problems is the equation of state which differs completely form the ideal-gas equation of state (EOS). Here, the original PPM is extended for real gas effect consideration.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.974-980
• /
• 1998

This study is concerned with the production of carbon fiber reinforced carbon(C/C) with polyaromatic mesophase pitch as matrix precursor and with the investigation of friction-wear characteristics in ambient air using a constant speed type of friction tester. The main problem in using the polyaromatic mesophase as the matrix precursor is the high viscosity which may limit the complete impregnation of the fiber preform in the vacuum. To solve these problems two dimensional carbon fiber fabrics were infiltrated with meso-phase pitch in the pitch impregnator. After the impregnation and the heat treatment process. C/C com-posites were characterized by density porosity to monitor the influence of high pressure and temperature. It showed that the bulk density was increased and the apparent porosity and the density increasing rate was reduced as repeating the impregnation the carbonization and the heat treatment. The friction-wear charac-teristics of C/C composites were investigated by measuring the average friction coefficient and the specific wear rate as functions friction speed and friction pressure using a constant speed type of friction tester. C/C composite4s showed the average friction coefficient to be reduced as increasing the friction speed and the friction pressure.

• Journal of Hydrogen and New Energy
• /
• v.34 no.3
• /
• pp.307-315
• /
• 2023

The physical and chemical changes exhibited by high density polyethylene (HDPE) after treatment with hydrogen at a pressure of 90 MPa followed by rapid release of the hydrogen were studied. X-ray diffraction, differential scanning calorimetry, thermo gravimetric analysis, and attenuated total reflectance (ATR)-fourier transform infrared (FTIR) were used for this purpose. As a result, it was found that the degree of crystallinity of HDPE decreased after hydrogen pressure treatment, while the average thickness of lamellae that constitute the crystals and the melting temperature of the crystalline region actually increased. The decomposition temperature also increased by about 3℃. In addition, it was found that the hydrogen bonding network between -OH groups in the HDPE sample was strengthened and partial chain scission occurred. These cut chains were found to be terminated by oxidative degradation such as cross-linking between chains, -C=O, -C-O, and -CHO, or by the formation of -CH₃ at the chain ends, as confirmed by ATR-FTIR.