• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.101-108
• /
• 2013

An aircraft fuel hose is a kind of high pressure hose, and generally consists of a nipple, a socket, an inner tube, and a reinforcement layer to increase the tensile strength. Especially the nipple supports the other components in manufacturing stages such as the swaging or crimping processes however, the nipple also serves to prevent leakage in cases of hose engagement with a hydraulic system. To ensure the seal of the hose assembly, a beam seal fitting with metal-to-metal contact is usually adopted at the end of a nipple. Therefore, the geometry of the beam is an important parameter to be determined to make sure there is sufficient contact force. This study aims to investigate the effects of beam seal geometry on the contact force by changing the inclined angle and the thickness of the beam. The results reveal that the proper thickness and inclined angle of the beam seal are 0.45 mm and $8.5^{\circ}$, respectively.

• 한국전산구조공학회논문집
• /
• 제36권3호
• /
• pp.165-171
• /
• 2023

건설기계와 특장차의 상부와 하부 구조를 연결하는 로터리 조인트는 축과 하우징이 회전하면서 유압을 전달하는데 오일의 유로에 누유를 방지하기 위해 여러 개의 시일이 조립된다. 시일재료는 강성이 커서 조립에 어려움이 있기 때문에 자른 후 조립하는 방법을 모색하였다. 절단면의 모양은 L형과 /형으로 하였고 유압이 작용할 때 누유 기준은 절단면에 발생하는 접촉압력으로 하였다. 시일의 구조와 재료는 이중 탄성중합체로 구성되며 강성이 큰 PE 재질만 절단한 경우에 대하여 비선형 접촉 구조해석을 수행하였다. 연구결과 절단 길이가 짧을수록 누유 방지에 유리하며 PE와 하우징이 접촉하는 윗면보다 NBR과 PE가 접촉하는 아랫면으로 누유될 가능성이 큰 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.666-671
• /
• 2007

To acquire the safety along with durability of mechanical machinery products, we should consider the structural mechanics such as stress, deformation and dynamic vibration characteristics and identify those important aspects in the stage of preliminary design engineering. This cryogenic ball valve is used to transfer the liquified natural gas which temperature is $-196^{\circ}C$, supplied pressure is $168kg/cm^2$. For the cryogenic ball valve, the assurance of structural integrity and operability are essential to meet not only normal, abnormal loading conditions but also functionality during a seismic event. In this thesis, analytical approach and results using finite element analysis and computational method are herein presented to evaluate the aspects of structural integrity along with operability of cryogenic ball valve. In this study, we designed the high pressure cryogenic ball valve that accomplishes zero leakage by elastic seal at normal temperature and metal seal at high temperature.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1990년도 추계학술대회논문집; 한양대학교, 서울; 24 Nov. 1990
• /
• pp.169-172
• /
• 1990

본 논문에서는 모달해석을 통해 불안정성을 제거 할 수 있는 메카니즘 (mechanism)으로 만든 씨일(Anti-Swirl Injection type Seal: ASIS)의 등록 성 및 누수량, 압력 강하등을 평씨일, 댐퍼씨일 등과 비교, 해석하여 본질의 역할 및 안정성을 동시에 향상시킬수 있는 씨일을 연구해보고자한다.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.61-68
• /
• 2020

7톤급 터보펌프 실매질시험에서 계측된 고주파 신호인 가속도와 압력섭동에 대한 주파수 분석(waterfall, frequency spectrum), 실효값(RMS) 계산 등의 신호 처리를 통해 산화제펌프의 신뢰성을 평가하였다. 계측된 압력섭동 신호 분석을 통해 산화제펌프의 누설 유로에 위치한 산화제 후방 플로팅 링에 의한 강한 압력섭동이 발생하였고 이는 산화제펌프 입구 및 출구 압력과 가속도 신호에도 영향을 주는 것을 확인하였다. 터보펌프의 가속도 실효값 계산을 통해 정격 운용 조건에서의 터보펌프는 양호한 진동 성능을 보여주고 있으며 가속도 회전수 성분 중 축계에 영향을 주는 회전수 동기 주파수 성분이 강하게 나타나는 것을 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제15권2호
• /
• pp.32-37
• /
• 2018

The power plants use turbine output control devices to supply or shut off steam to high pressure and low-pressure steam turbines connected to generators. This turbine output control device is driven by a hydraulic servo actuator. The gas flows into the hydraulic servo actuator during periodic inspection or normal operation, and the resulting adiabatic compression of the gas raises the internal temperature of the actuator to $500^{\circ}C$. This temperature increase causes the seals to burn and show wear and tear, resulting in failure. In this study, an air vent valve was installed to allow gas inside the hydraulic servo actuator to flow large quantities of air at the beginning of the operation and after the periodic inspection. Gas was passed through for only minute flow during normal operation of the power plant. By applying the air vent valve, it improves the reliability of the hydraulic servo actuator by discharge the gas appropriately to improve the life of the seal.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.453-458
• /
• 2020

In this study, ethylene-propylene-diene monomer (EPDM) rubbers reinforced with various particle size of carbon black were prepared and tested. We followed recently published CSA/ANSI CHMC2 standard "the test methods for evaluating material compatibility in compressed hydrogen applications-polyemr". Measurement of change in hardness, tensile strength and volume were performed after exposure to maximum operating pressure, 87.5 MPa, for 168 hours (1 week). Once EPDM was exposed to high-pressure hydrogen, the samples experience volume increase and degradation of the physical properties. Also, after the dissolved hydrogen was fully eliminated from the specimens, the hardness and the tensile properties were not recovered. The rubber reinforced with smaller sizes of carbon black particles showed less volume expansion and decrease of physical properties. As a result, smaller particle size of carbon black filler led to more resistance to high-pressure hydrogen.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.329-336
• /
• 2004

The lock-up position of the floating ring seal affects the leakage flowrate and the stability. And it is changed depending on the operating and geometry condition. In this paper, the leakage flowrate and stability with change of the height and length were investigated by theoretical analysis and experiment. The parameter of the height and length is expressed to the b and L. The decreasing of the b resulted in the increasing of equivalent whirl frequency ratio in the experimental result at the low speed and high pressure not such as theoretical analysis. As the L increased the leakage flowrate decreased and stiffness and direct damping coefficient increased in the experimental result. That was similar to the theoretical analysis.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.29-33
• /
• 2008

As the measures of nuclear power plant utilities and manufacturers to reduce the defects of tube expansion region during manufacturing steam generators, many types of NDEs(Non-Destructive Examinations) are conducted to inspect the expansion region. The expansion region of tube is subject to degrade because of stress concentration induced by tube expansion, sludge pile and high temperature. So the inspections for tube expansion region have been reinforced. Liquid penetrant test, helium leak test, Bobbin profile test and hydraulic test are performed to confirm the integrity of tube expanded by hydraulic expansion method. Liquid penetrant test and helium leak test are used to inspect seal weld region on tubesheet end part. Bobbin Profile test is used to inspect fully the expanded region of steam generator tube. Hydraulic test finally verifies the integrity of seal weld region on tubesheet end part.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.356-363
• /
• 2001

Piston seal is a device designed to prevent leakage in split connecctions or between relatively moving part. Contact force, critical pressure at which extrusion occurs, leakage rate, fluid film thickness and friction force have been analyzed for some design parameter such as clearance between cylinder wall piston, depth of rectangular groove and pressure of sealed hydraulic fluid. In this paper, we analyze displacement and stress of Wearing by finite element analysis to understand Contact Behaviour Characters.