• 전력전자학회논문지
• /
• 제5권1호
• /
• pp.46-53
• /
• 2000

본 논문에서는 전원전압 센서 없는 단상 PWM 컨버터의 전류제어방법을 제안한다. 제안된 방법에서 전원전압은 슬라이딩 모드 관측기에 의해 추정되며 추정된 전원전압을 이용하여 컨버터의 입력 역률을 '1'로 하고 일정한 DC링크전압을 얻을 수 있다. 제안된 방법의 특징은 전원전압의 크기와 위상의 추정이 실제전류와 추정전류의 전류오차에 의해서 얻어질 수 있다. 제안된 방법은 DSP를 이용하여 구현하고, 실험결과는 제안된 방법의 정당성을 입증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.169-170
• /
• 2014

본 논문에서는 높은 역률을 가지는 PFC(Power Factor Correction) 컨버터와 높은 고주파 전압을 발생시키는 단상 하프브리지 인버터를 채용한 오존발생기를 소개한다. PFC 컨버터를 채용하여 기존의 오존발생기용 전원장치에 비해 입력 역률, 전원공급체계와 보호 장치를 개선하였으며, 3kW급의 프로토타입을 구현하고 시뮬레이션 및 실험을 통하여 전원장치의 안정성 및 입력에 대한 높은 역률(0.99이상)을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.621-624
• /
• 2001

A metal sheath provides a cable with electrostatic screening and a degree of magnetic screening. The presence of a screen on a cable also reduces the induction arising from the high-frequency components of transients caused by power-line switching and also induced transients from lightning strokes; such transient induced voltages are of increasing importance with the increasing use of miniaturized telecommunication equipment with very small thermal capacity. This paper describes electrostatic induction and electromagnetic induction caused by power interference. Also screening factors are proposed.

• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.540-548
• /
• 2007

본 논문에서는 기존의 역율 보상회로에 비해 성능이 좋은 역율 보상 고효율 PWM 단상 정류기를 제안하였다. 제안한 정류기의 설계를 용이하게 하기위한 설계 가이드라인을 상세히 제시하였으며, 제안한 정류기의 특성을 실험으로 증명하였다. 제안한 정류기는 주 전류가 흐르는 선로 구성에서 2개의 주스위치만 존재하므로 도통손을 상당히 감소 시켰으며, 또한 단일 ZVT 회로를 통해 스위칭 손실을 감소시켰다. 제안한 정류기는 부스트 컨버터형의 같은 IGBT 모듈을 사용하므로 주 회로 구성도 간단할 뿐만 아니라, 주 스위치와 보조스위치의 게이트 전원을 제어전원과 공유할 수 있어 단일 제어전원으로 전체 시스템을 제어하므로 시스템의 크기를 보다 콤팩트하게 할 수 있는 특성을 지니고 있다.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.125-134
• /
• 1992

This paper presents a cycloconverter with an LC resonant circuit for an induction motor drive. The cycloconverter can keep input displacement factor at 1.0 by independently controlling real and reactive power under any load conditions. Furthermore it can keep power factor at about 1.0 since input and output current waveforms are nearly sinusoidal. Since it uses high frequency resonant circuit for commutation source, it can produce an output voltage of hundreds of hertz. Since it is also possible to make a system of high capacity using the cycloconverter, it is appropriate to drive motors with high speed and high capacity as well as general purpose motors, In this paper, we describe the operating principles of the cycloconverter and power control algorithms, and analyze its waveforms and present its characteristics. Expermental results are shown for the volts/hertz control of the induction motor and the validity of the proposed model is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1322-1327
• /
• 2005

This paper presents a single-stage ZVT full-bridge AC/DC converter for aerospace applications. The detailed operating principle and design consideration of this soft-switched converter are analyzed and described. The proposed circuit topology and control scheme are proposed to exhibit optimum performances (i.e. high power factor, high efficiency, ring-free and low EMI features). A laboratory prototype, 500W 5V/100A AC/DC converter was implemented. The simulation and experimental waveforms verify the feasibility of the proposed design.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.132-135
• /
• 2005

A modular photovoltaic PCS with high-frequency isolation is proposed. The proposed system consists of a SEPIC converter and a full-bridge inverter. Using the power slope versus voltage of the PV array, the MPPT controller is proposed that produces a smooth transition to the maximum power point. The disturbance of the line voltage is detected using a fast sensing technique. Experimental results obtained on a 500W prototype show high performance such as almost unity power factor, $90\%$ power efficiency, $3.6\%$ THD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.367-369
• /
• 1996

This paper proposed that a buck type AC-DC Converter for high power factor operates with four chopper connecting a number of parallel circuit. And, some simulative results on computer is included to confirm the validity of the analytical results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1209-1210
• /
• 2006

This paper presents a single phase high power factor PWM boost rectifier featuring soft commutat -ion of the active switches at zero current. It incorporates the most desirable properties of conventional PWM and soft switching resonant techniques. The input current shaping is achieved with average current mode control and continuous inductor current mode. This new PWM converter provides zero current turn on and turn off of the active switches, and it is suitable for high power applications employing IGBT's. The principle of operation, the theoretical analysis, a design example, and experi -mental results from a laboratory prototype rated at 1.6[kW] with 400[Vdc] output voltage are presented. The measured efficiency and the power factor were 96.2[%] and 0.99[%], respectively, with an input current THD equal to 3.94[%], for an input voltage with THD equal to 3.8[%], at rated load.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1169-1171
• /
• 2003

This paper presents a 1.6[kW]class single phase high power factor(HPF) pulse width modulation(PWM) boost rectifier featuring soft commutation of the active switches at zero current. It incorporates the most desirable properties of conventional PWM and soft switching resonant techniques. The input current shaping is achieved with average current mode control and continuous inductor current mode. This new PWM converter provides zero current turn on and turn off of the active switches, and it is suitable for high power applications employing insulated gate bipolar transistors(IGBT'S). The principle of operation, the theoretical analysis, a design example, and experimental results from laboratory prototype rated at 1.6[kW] with 400[Vdc] output voltage are presented. The measured efficiency and the power factor were 96.2[%] and 0.99[%], respectively, with an input current Total Harmonic Distortion(THD) equal to 3.94[%], for an input voltage with THD equal to 3.8[%], at rated load.