• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1978-1979
• /
• 2007

In this paper, the authors introduce a high-speed microprocessor based on automatic vacuum capacitor switch with a modified digital filter design using distributed arithmetic. The automation trends particularly the automatic vacuum capacitor switch has helped ameliorate the power factor essentials and automatically triggered to close when the line current exceeds rated value. Microprocessor relays use digital filters to extract only the fundamental and attenuate harmonics. To provide optimum speed characteristics a distributed arithmetic based filter design in the microprocessor controller which not only enhances filtering speed but additionally enables lower power consumption at the cost of area has been introduced. The result is a unified description that describes a digital filter structure down to bit level.

• 전력전자학회논문지
• /
• 제23권6호
• /
• pp.397-402
• /
• 2018

In this study, a high-efficiency flyback converter that uses a soft-switching auxiliary circuit is proposed. The structure of the proposed converter adds an inductor, switch, diode, and capacitor to the conventional flyback converter. The switch in the auxiliary circuit and the main switch are turned on and off under soft-switching conditions. Therefore, the switching losses of the proposed flyback converter are considerably smaller than those of conventional flyback converters. The performance of the proposed flyback converter is validated by experiments on a 100 W single-output flyback converter prototype, and design guidelines are presented.

• 전력전자학회논문지
• /
• 제3권1호
• /
• pp.70-76
• /
• 1998

본 연구에서는 고역률로 동작하면서 입력전류의 고조파성분을 크게 억제시키는 AC/DC 스위치모드 콘버어터의 기본적인 동작을 해석하고, 이를 기초로 수학적모델을 도출하여 전체 회로의 동작을 나타내는 모의실험방법을 제시한다. 제시된 모의실험모델로써 필터나 부스트인덕터 등의 회로구성요소의 정격을 결정하거나 정상 및 고장 운전조건하에서의 동작을 해석할 수 있음으로써 전체회로의 설계기준을 정할 수 있을 것이다. 모의실험결과가 실제 실험결과와 거의 일치함을 보임으로써 제시한 모의실험모델의 타당성을 입증하였다.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1099-1107
• /
• 2019

A soft switching converter with wide voltage range operation is investigated in this paper. A series resonant converter is implemented to achieve a high circuit efficiency with soft switching characteristics on power switches and rectifier diodes. To improve the weakness of the narrow voltage range in LLC converters, an alternating current (ac) power switch is used on the primary side to select a half-bridge or full-bridge resonant circuit to implement 4:1 voltage range operation. On the secondary-side, another ac power switch is adopted to select a full-wave rectifier or voltage-doubler rectifier to achiever an additional 2:1 output voltage range. Therefore, the proposed resonant converter has the capacity for 8:1 (320V~40V) wide output voltage operation. A single-stage hybrid resonant converter is employed in the study circuit instead of a two-stage dc converter to achiever wide voltage range operation. As a result, the study converter has better converter efficiency. The theoretical analysis and circuit characteristics are verified by experiments with a prototype circuit.

• 조명전기설비학회논문지
• /
• 제16권1호
• /
• pp.35-43
• /
• 2002

새로운 형태의 고체 상태의 대전력, 고속전자장치인 광전도 전력스위치(PCPS)의 개발과 대전력 및 고전압 상태하에서 광전도 전력스위치의 고전계 동작특성을 규명하기 위해서 많은 연구가 행해지고 있다. 그러나 표면 섬락 현상이 확실하고 효과 있는 고속, 고압스위칭 소자의 실현을 방해하고 있다. 이러한 연면방전의 물리적 현상의 명백한 이해는 새로운 기술과 소자구성을 발전시키는데 매우 중요할 뿐 아니라, 고전계·고전압에서의 동작특성을 향상시키는데 있어서도 특별한 의미를 가진다. 뿐만 아니라 고전계, 고전력 소자들을 안전하게 동작할 수 있게 하기 위해서도 필요하다. 연면방전 및 표면 절연파괴현상은 반도체 벌크 파괴 전계보다 훨씬 낮은 전계에서 적용되어 파괴된 모든 소자들에서 발생하기 때문에 이러한 문제를 해결하는 매우 실용적인 방법이 소자의 표면을 절연물로 페시베이션하는 것이다. 페시베이션된 소자들은 고전계에서 언페시페이션된 소자에 비해 매우 좋은 동작특성을 나타내므로, 본 논문에서는 페시베이션된 소자와 언페시베이션된 소자간의 I-E특성과 파괴 메커니즘을 규명하고 더 나아가 다중 페시베이션에 대한 몇몇 특성 값을 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.460-465
• /
• 1998

Due to high power ratings and low conduction loss, the IGBT has become more attractive in switching power supplies. However, its turn-on and turn-off characteristics cause severe switching loss and switching frequency limitation. This paper proposes 2.4kW, 48V, high efficiency half-bridge DC-DC converter using paralleled IGBT-MOSFET switch concept, where each of IGBT and MOSFET plays its part during on-periods and switching instants. The switching loss is analyzed by using the linearized model and the opteration of the converter are investigated by simulation results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.249-252
• /
• 2001

A large number of soft switching topologies included a resonant circuit have been proposed. But these circuits increase number of switch in circuit and complicate sequence of switching operation. In this Paper, the authors propose power conversion system, DC-AC inverter of high efficiency and high power factor with soft switching mode by partial resonant method. The result is that the switching loss is very low and the efficiency of system is high. And the snubber condenser used in partial resonant circuit makes charging energy regenerated at input power source for resonant operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2201-2202
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.569-570
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1235-1236
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.