• 전력전자학회논문지
• /
• 제16권4호
• /
• pp.366-373
• /
• 2011

펄스파워에서 주로 사용되는 자기스위치는 반복률, 신뢰성, 소자수명에서 우수한 특성을 가진다. 그러나 자기스위치는 현재 대부분 수동으로 조작하여 스위칭 동작을 최적화하고 있으며, 부하가 변동될 경우 스위칭 상태를 자동으로 최적화할 수 없다. 본 논문은 CCPS(capacitor charging power supply)를 이용한 고압펄스 압축용 전원장치의 펄스압축을 위해 사용되는 자기스위치(magnetic switch)의 자동제어 방법을 제안하였다. 자기스위치를 부하변동에 따라 자동으로 제어함으로써 시스템의 에너지 효율을 최적화 할 수 있다. 제안된 방법은 실험을 통하여 검증하였다.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.120-125
• /
• 2006

Inverse pinch 스위치는 기존 스위치와 달리 전극의 손상을 줄이기 위해 나선형 전극형태로 제작하였다. 이 스위치는 전기적 트리거 펄스전압을 인가하여 동작시키며, 본 연구의 실험결과 전극간에 발생되는 아크확산 및 전류이동 때문에 전극수명이 길고, 대전류에도 견디기 때문에 펄스파워 시스템에 사용할 수 있다는 것을 확인하였다.

• 전력전자학회논문지
• /
• 제23권3호
• /
• pp.153-160
• /
• 2018

Recent trends in high-power-density applications have highlighted the importance of designing power converters with high-frequency operation. However, conventional LLC resonant converters present limitations in terms of high-frequency driving due to switching losses during the turn-off period. Switching losses are caused by the overlap of the voltage and current during this period, and can be decreased by reducing the switch voltage. In turn, the switch voltage can be reduced through a series connection of four switches, and additional circuitry is essential for balancing the voltage of each switch. In this work, a three-level LLC resonant converter that can operate at high frequency is proposed by reducing switch losses and balancing the voltages of all switches with only one capacitor. The voltage-balancing principle of the proposed circuit can be extended to n-level converters, which further reduces the switch voltage stress. As a result, the proposed circuit is applicable to high-input applications. To confirm the validity of the proposed circuit, theoretical analysis and experimental verification results from a 350 W-rated prototype are presented.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.786-797
• /
• 2016

This paper describes the design and development of a novel semiconductor-based solid-state switch for damped oscillating voltage test system. The proposed switch is configured as two identical series-connected switch stacks, each of which comprising 10 series-connected IGBT function units. Each unit consists of one IGBT, a gate driver, and an auxiliary voltage sharing circuit. A single switch stack can block 20 kV-rated high voltage, and two stacks in series are proven applicable to 30 kV-rated high voltage. The turn-on speed of the switch is approximately 250 ns. A flyback topology-based power supply system with a front-end power factor correction is built for the drive circuit by loosely inductively coupling each unit with a ferrite core to the primary side of a power generator to obtain the advantages of galvanic isolation and compact size. After the simulation, measurement, and estimation of the parasitic effect on the gate driver, a prototype is assembled and tested under different operating regimes. Experimental results are presented to demonstrate the performance of the developed prototype.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.397-398
• /
• 2013

Fairchild Green Mode off line buck switch for low standby power consumption and high reliability is presented. By reducing operating current and optimizing switching frequency, 20mW power consumption is achieved. High performance trans-conductance amplifier and green mode function improve the ripple and regulation in the output voltage. The conventional $FPS^{TM}$ buck and novel Fairchild buck switch are compared to show the improvement of performance. Experimental results are showed using 2W evaluation board.

• ETRI Journal
• /
• 제28권1호
• /
• pp.84-86
• /
• 2006

This letter presents a small-sized, high-power single-pole double-throw (SPDT) switch with defected ground structure (DGS) for wireless broadband Internet application. To reduce the circuit size by using a slow-wave characteristic, the DGS is used for the quarter-wave (${\lambda}$/4) transmission line of the switch. To secure a high degree of isolation, the switch with DGS is composed of shunt-connected PIN diodes. It shows an insertion loss of 0.8 dB, an isolation of 50 dB or more, and power capability of at least 50 W at 2.3 GHz. The switch shows very similar performance to the conventional shunt-type switch, but the circuit size is reduced by about 50% simply with the use of DGS patterns.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.497-503
• /
• 2015

This paper analyses the harmonic pollution to power grids caused by several high-power rectifiers, summarizes the requirements for rectifiers in suppressing grid-side current harmonics and optimizes a new-type of current source PWM rectifier with a hybrid switch. The rectifier with a hybrid switch boasts significant current characteristics and cost advantages in the high-power area. To further enhance the working frequency of the current source rectifier with a hybrid switch for suppressing grid-side harmonics and reducing the inductance size, this paper proposes an optimal control strategy based on space vector. It also verifies that the optimal control strategy based on space vector can reduce the total harmonic distortion of the grid-side current of the rectifier with a hybrid switch via circuit simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.707-710
• /
• 2002

A 120kV/70A high voltage switch has been installed at Korea Atomic Energy Research Institute in Taejon to supply power with Korea Superconducting Tokamak Advanced Research (KSTAR) Neutral Beam Injection (NBI) system. NBI system requires fast cutoff of the power supply voltage for protection of the grid when arc detected and fast turn-on the voltage for sustaining the beam current. Therefore the high voltage switch and arc current detection circuit are important part of the NBI power supply and there are much need for high voltage solid state switches in NBI system and a broad area of applications. This switch consisted of 100 series connected MOSFETs and adopted the proposed simple and reliable gate drive circuit without bias supply, Various results taken during the commissioning phase with a 100kW resistive load and NBI source are shown. This paper presents the detailed design of 120kV/70A high voltage MOSFETs switch and simple gate drive circuit. Problems with the high voltage switch and gate driver and solutions are also presented.

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.51-59
• /
• 2008

This paper addresses several issues concerning the analysis, design, modeling, simulation and development of single-phase, single-switch, power factor corrected AC-DC high frequency switching converter topologies with transformer isolation. A detailed analysis and design is presented for single-switch topologies, namely forward buck, flyback, Cuk, Sepic and Zeta buck-boost converters, with high frequency isolation for discontinuous conduction modes (DCM) of operation. With an awareness of modem design trends towards improved performance, these switching converters are designed for low power rating and low output voltage, typically 20.25W with 13.5V in DCM operation. Laboratory prototypes of the proposed single-switch converters in DCM operation are developed and test results are presented to validate the proposed design and developed model of the system.

• 한국전자파학회논문지
• /
• 제18권4호
• /
• pp.364-371
• /
• 2007

본 논문에서는 와이브로 기지국 시스템을 위한 고전력 PIN 다이오드 스위치와 고속 스위치 구동회로에 대한 설계와 측정 결과를 제공한다. 일반적인 전력용 팩키지 다이오드의 기생 인덕턴스에 의한 격리도 열화를 막고 다이오드 스위치의 전력 능력을 향상시키기 위해 칩 형태의 다이오드를 사용하였으며, 본딩 와이어에 의한 직렬 인덕턴스는 전송선로의 임피던스에 쉽게 흡수될 수 있도록 회로를 구성하였다. 구현된 스위치 모듈은 사용된 다이오드의 개수를 최대한 줄이면서 최대의 성능을 얻을 수 있도록 설계되었으며 2.35 GHz에서 써큘레이터의 손실을 포함하여 약 0.84 dB의 삽입 손실과 80 dB 이상의 격리도 특성을 보였다. 또한 TTL 신호를 통한 스위치 모듈의 제어를 위해 스위치 구동회로를 설계, 제작하였으며 스위칭 속도는 200 nsec로 측정되었다. 스위치 모듈은 디지털 변조된 고전력 신호에 의해 전력능력이 시험되었으며 70 W의 전력이 인가되는 경우에도 정상적으로 동작하는 특성을 보여주었다.