• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.274-282
• /
• 2011

The purpose of this study was to investigate factory workers' knowledge of sanitation management of school foodstuffs and sanitation practices. A questionnaire that identified employees' food safety sanitation management knowledge and practices was developed based on a review of literature. Subjects consisted of 221 factory workers employed at 34 factories in the Daegu and Gyeongbuk areas. Almost half of the factory workers were 40~49 years of age (45.7%), 34.8% had 1~3 years of work experience, 62.4% of the respondents received food safety education 1~2 times a month and 75.1% of the respondents were satisfied with sanitation education. However, the total score for factory worker sanitation knowledge was low: 4.63/9. Sanitation performance was self-evaluated using a Likert 5-point scale. The total mean score for the factory workers' sanitation performance was 4.63/5. Satisfaction level and the amount of sanitation education, application of sanitation knowledge, attitude regarding sanitation management, and sanitation management performance level were significantly high among workers employed in a HACCP certification facility (p<0.05). The difficulties were found to be sanitation management and the time to deliver food to schools. To instill a sense of duty and pride among workers and to ensure that the food suppliers provide best-quality school foodstuffs safely, school dietitians and factory managers must actively educate workers in safe food handling and sanitation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.411-422
• /
• 2002

Recently, there have been active researches about the VPCS (Virtual Parallel Computing System) based on multiple agents. The PVCS uses personal computers or workstations that are dispersed all over the internet, rather than a high-cost supercomputer, to solve complex problems that require a huge number of calculations. It can be made up with either homogeneous or heterogeneous computers, depending on resources available on the internet. In this paper, we propose a new method in order to distribute worker agents and work packages efficiently on the VPCS based on the IBM Aglets. The previous methods use mainly the master-slave pattern for distributing worker agents and work packages. However, in these methods the workload increases dramatically at the central master as the number of agents increases. As a solution to this problem, our method appoints worker agents to distribute worker agents and workload packages. The proposed method is evaluated in several ways on the VPCS, and its results are improved to be worthy of close attention as compared with the previous ones.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.3
• /
• pp.355-365
• /
• 2008

The purpose of this study was to investigate the food sanitation awareness and performance of foodservice industry employees. Based on a literature review, a questionnaire was developed to identify the food sanitation education, experience, knowledge, and food sanitation practices of the employees. A total of 376 Korean food industry employees participated, and there were 344 usable questionnaires. In the analysis of food sanitation knowledge, the statements "clip fingernails short and do not use nail polish", and "if feeling sick, even with a minor cold, speak to your supervisor immediately", had the highest and lowest percentages of correct answers, respectively. In assessing employee sanitary management practices, many correctly acknowledged "clip fingernails short and do not use nail polish" and "wash hands after using the toilet", which received high scores; however, "use hands to pick up ice" and "if feeling sick, even with a minor cold, speak to your supervisor immediately" had low scores. The sanitary knowledge and practice levels of the employees were not significantly different according to gender, age, work area, job title, or duration of duty. Among the surveyed industries, employees of special restaurants had the least sanitary knowledge(p<0.05) and practice scores(p<0.001). Employees who had worked for $1{\sim}3$ years presented the least sanitary management practice level scores(p<0.05).). In addition, college students and participants without hygiene educational experience showed the least levels of sanitary knowledge(p<0.01). Scores for sanitary management practice were higher when hygiene education was regularly conducted more than once per month. Employees showed significantly higher knowledge and sanitary management practice levels when they were required to use a sanitary checklist(p<0.001), and employees who were trained in HACCP had significantly higher sanitary checklist scores(p<0.05). In foodservices that applied HACCP, the employees showed higher knowledge and sanitary management practice levels(p<0.001).

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.228-236
• /
• 2016

Extraordinarily the establishment of towing tank has been initiated after the allocation of space at the basement floor of existing building through remodeling procedure. Therefore the asymmetric tank should be unavoidably determined by compromising with the allowable space and existing building structure. Consequently the shape of towing carriage ought to be selected as a cantilever type to match with the given environmental conditions. Finally the major role of the towing tank has been configured on the fundamental research work for the high speed marine vehicles. Due to the limited length of towing tank, it is appeared that the carriage should accelerated with 1.2m/sec² which is equivalent to twice of the maximum acceleration in ordinary practices on design application of carriage. In such a condition the exerted total power of motor could not be converted to traction force of the carriage without slip for the acceleration. To overcome these difficulties the contact pressure of a horizontal traction wheel to rail has been reinforced by the elastic recovery force of springs on supporting rollers. It is believed that the design experience of the high speed towing carriage under unusual circumferential condition and acceleration barrier could be utilized not only on the design of high speed towing carriage but also on the improvement of existing facilities.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.12 no.2
• /
• pp.43-50
• /
• 2024

Purpose: The present study investigates if the type of organizational culture influences the level of job-related stress. This study is significant because creating the need to explore the concept to become more informed on the best practices to promote and foster a positive culture that prioritizes workers, it could result in a healthier workforce, improved organizational performance, and success. Research design, data and methodology: Examining previous studies by other researchers was the primary research tool for this study. The organized approach of gathering data and assessing related work was vital in developing a fundamental basis for advancing knowledge on this concept while enhancing theory development and drawing more informed conclusion. Results: These four types, including the clan, adhocracy, hierarchical, and market cultures, contribute significantly in revealing four associations between the two variables, including (i) supportive culture and reduced stress, (ii) high pressure and increased stress, (iii)autonomous culture and variable stress levels, and (iv) open culture and low-stress levels. Conclusions: The literature affirms a multifaceted link between employee workplace stress and organizational culture type. The findings show that these cultures are crucial in influencing the level of stress among employees. All four types were hypothesized to have a significant relationship with job stress.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.2
• /
• pp.255-268
• /
• 2010

Objectives : In the field of dental hygiene, infections pose a serious problem. This issue has left many patients and dental staff exposed to microbes with potentially far-reaching effects. The purpose of this study was to find solutions which could improve Dental health policies and promote improved methods for the control of infections. This survey was conducted between March 3, 2008 and March 30, 2008, in the metropolitan area. The research was carried out in dental clinics and dental hygienists were surveyed through a questionnaire. Methods : Collected data was examined using the SPSS 14.0 program, using frequency, mean and standard deviation analysis, T-test, one-way ANOVA, Scheffe's test and Duncan's test. Further analysis was given using Logistic Regression. Results : The Performance of Infection Control by dental hygienists in Dental Clinics was shown at $2.96{\pm}0.42$. Disinfection, sterilization and the wearing of masks is high at $3.65{\pm}0.64$, $3.64{\pm}0.65$. The perception of the importance of infection control is higher among dental hygienists than dentists. Of the dental hygienists surveyed, 83.9% were exposed to at least one accident while at work. Age and years of experience were important in relation to infection control practices. The rate of infections and the number of accidents experienced related to the dental hygienists performance of infection control. The performance of infection control is influenced by the dental hygienists own perceptions, and the perceptions of their dentists. The dental hygienist's working conditions and their beliefs related to infection control were shown to influence their performance of infection control practices. Conclusion : At the conclusion of this investigation, it was determined that systematic refresher training of infection control should be delivered through further education and various media. Dental health care workers should be encouraged to practice these action items presented in the training. For successful implementation of infection control in every dental health-care setting, it is highly demanded that effective safe-guard tools, strategic support and standardized action items against infection problems are developed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.2
• /
• pp.149-156
• /
• 2005

The HLA is the simulation architecture standard that the civilian and military simulation communities are deeply interested in. We can find various successful practices applying HLA to constructive simulations such as war games in domestics and overseas. However, any case of real-time distributed simulations has not been reported. The reason is that a message transmission period via RTI in a network layer varies according to computing power, simulation nodes, transmission types, and packet size; further a message processing time in an application layer depends on its processing methods, thus too difficult to set up real-time constraints for the enhancement of a real-time resolution. Hence, in this paper we have studied the real-time constraints of RTI for the development of the M-SAM simulator. Thus we have developed a HLA based pilot simulator using 6 PC's in LAN and then measured and analysed the performance of the RTI. As the results of our work, we could obtain the quantitative values for message delay, RTI overhead and RTI packet transmission ratio by a real operation scenario and loads, which are not shown in the previous works. We also expect that the results can be used as a guideline to set up the number of targets, transmission frequency and message processing method in the development of the M-SAM simulator and similar applications.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1535-1544
• /
• 2010

This study was conducted to evaluate the sanitation management practices in food manufacturing companies that supply food and food ingredients to school foodservice operations. Subjects consisted of 34 food manufacturing factories located in the Daegu and Gyeongbuk areas. Sanitation performance was self-evaluated using a Likert 5-point scale. The total mean score for factory sanitation performance was 4.72. Scores for perceived sanitation management performance in the factories were as follows: management of material (4.90); personal hygiene (4.78); management of work (4.71); management of workplace and vicinity (4.68); and food and raw material transportation (4.67). Participating companies that had HACCP certification programs scored high on the following sanitation inspection items: washing and sanitation guides, adequate equipment for correct hand washing, and sanitation of raw material delivery vans. The mean frequency for employee sanitation education was 2.8 times per month. Factory managers believed that their sanitation management programs kept their food safe and that the food was produced and delivered with a high degree of safety. However, they thought that food sanitation standardization was needed in order to supply high-quality and safe food items. In terms of traceability, 58.8% of the raw materials were traceable and 61.8% of the manufactured products were traceable. Sanitation management performance scores for the participating food manufacturing companies were high, although the soybean sprouts processing companies had comparatively low scores. Management reinforcement of employee sanitation education and a sense of duty and pride among factory employees will promote adequate and appropriate sanitation management performance for food safety and quality in factories that supply food and ingredients to school foodservice operations.

• The Journal of Art Theory & Practice
• /
• no.13
• /
• pp.133-156
• /
• 2012

This paper briefly charts the history of excrement as part of the late 20th-century art and explores ways in which excrement functions in the realms of 'High' art. From Piero Manzoni's to David Hammons' performance , excrement has taken a small yet distinctively important part in the development of contemporary art. In an attempt to challenge the hegemony of 'high' art, on the one hand, and resist the commercialization and fetishization of art, on the other, Manzoni allegedly offered his own "shit" preserved in a tin can and sold it at the price of gold of the same weight. Andy Warhol took the legendary Abstract-Expressionist painter Jackson Pollock as the object of parody, simulating Pollock's dripping action by pissing onto the canvas that had been primed with copper-based paint. Warhol's urination produced splashes and stains of iridescent colors just as the patterns on ordinary abstract paintings. In contrast to Pollock's masculine action, Warhol's pissing alludes to the artist's homosexuality. Excrements in art also provoked controversies, debates, and even acts of vandalism against the artworks. The works of Andres Serrano and Chris Ofili infuriated many Christians for the blasphemous use of excrement with religious icons. Politicians engaged in the heated debates on the use of public and national funds in support of some of the 'politically incorrect' contemporary art. In the midst of media sensation and criticisms, these works challenged the conventional understanding of artistic beauty. The preexisting artworks were also targeted. African-american artist Hammons assumed the role of spectator in by urinating on Richard Serra's sculpture in the street of New York City. It was an act condemnation levelled at the racist pattern of the way in which large portions of funds and commisions of "public" art tended to promote established 'white' artists, whose work or creative process often failed to reflect the actual public. The use of excrement in art is not unusual in contemporary art practices. With its subversive power, excrement plays an important critical roles in the shaping of contemporary art.

• KIISE Transactions on Computing Practices
• /
• v.23 no.5
• /
• pp.299-303
• /
• 2017

By piling up hidden layers in artificial neural networks, deep learning is delivering outstanding performances for high-level abstraction problems such as object/speech recognition and natural language processing. Alternatively, deep-learning users often struggle with the tremendous amounts of time and resources that are required to train deep neural networks. To alleviate this computational challenge, many approaches have been proposed in a diversity of areas. In this work, two of the existing Apache Spark-based acceleration frameworks for deep learning (SparkNet and DeepSpark) are compared and analyzed in terms of the training accuracy and the time demands. In the authors' experiments with the CIFAR-10 and CIFAR-100 benchmark datasets, SparkNet showed a more stable convergence behavior than DeepSpark; but in terms of the training accuracy, DeepSpark delivered a higher classification accuracy of approximately 15%. For some of the cases, DeepSpark also outperformed the sequential implementation running on a single machine in terms of both the accuracy and the running time.