• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.285-293
• /
• 2012

Multilevel inverters have gained attention in high-power applications due to their numerous advantages in comparison with conventional two-level inverters. In this paper a simplified Space-Vector Modulation (SVM) algorithm for a three-level Neutral-Point Clamped (NPC) inverter is implemented on a Freescale$^{(R)}$ DSP56F8037. The algorithm is based on a simplification of the space-vector diagram for a three-level inverter so that it can be used with a two-level inverter. Once the simplification has been achieved, calculation of the dwell times and the switching sequences are carried out in the same way as for the two-level SVM method. Details of the hardware design are included. Experimental results are analyzed to validate the performance of the simplified algorithm.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.103-108
• /
• 1999

The paper describes a implementation of space vector pulse-width modulation voltage source inverter and interfacing of DSP using field programmable gate array(FPGA) for a induction motor vector control system. The implemented chip is included logic circuits for SVPWM, dead time compensation and speed detection using Quick Logic, QLl6X24B. The maximum operating frequency and delay time can be set to 110MHz and 6 nsec. The designed Application Specific Integrated Circuit(ASIC) for SVPWM can be incorporated with a digital signal processing to provide a simple and effective solution for high performance induction motor drives with a voltage source inverter. Simulation and implementation results are shown to verify the usefulness of ASIC in a motor drive system and power electronics applications.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.183-189
• /
• 2006

In this work, the digital simulator for testing of digital protective relay is presented. The proposed simulator software has EMTP simulation data file conversion, sequence waveform generation, user define simulation data generation, communication engine, data analysis engine and measurements function etc. The simulator hardware is designed using 32bit floating point DSP architecture to achieve flexibility and high speed operation. This simulator is tested to evaluate the performance of relay simulator by using a output data of simulation model on EMTP.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.141-146
• /
• 2002

Real-time monitoring and control of the cutting force is essential for unmanned cutting process. Although the cutting force can be measured directly using tool dynamometers, their implementation is not feasible in industry due to high cost. Alternative approach is the cutting force estimation based on spindle drive models, but it requires the knowledge of their characteristics with the spindle speed variation. This paper investigates the power-factor and frictional characteristics of three-phase induction motors and determines its characteristics below and above the base speed, respectively. In order to realize the proposed cutting force monitoring system, a stand-alone DSP board was utilized. Its monitoring and control performance is evaluated in a CNC lathe.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권11호
• /
• pp.757-762
• /
• 2000

This paper presents a digital controller for three-phase Boost Converter. Generally, the conventional Space-Vector Pulse Width Modulation (SVPWM) have complex computation. Thereby, it should be implemented with high performance processor. In order to reduce calculation burden of the conventional SVPWM, digital controller which has a simplified SVPWM algorithm is designed in this study. A proposed digital controller consists of fuzzy pwm controller and prediction controller. In simulations and experiments, the proposed digital controller is validated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1132-1134
• /
• 2003

This paper presents the realization of the vector control for AC servo motor using a high performance DSP, TMX320F2812. This DSP has some special peripheral circuits to drive a AC Servo motor as AD converter, QEP and so on. It makes us reduce the time of developing a control system and also can be simple size controller. The vector control algorithm for instantaneous torque control and SVPWM algorithm by offset voltage methods is adopted and we got the satisfactory results.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.429-438
• /
• 1986

In this paper we have designed and implemented a real-time, full-duplex SBC (sub-band coding) codec at 16kbps using a high speed digital signal processor, NEC 7720. The SBC codec employs a QMF(quadrature mirror filter) filter bank based on the tree structures of two-band analysis-synthesis pairs to partition speech signal into 4 octabe bands. Computer simulation has been done to investigate the effect of fixed-point computation of the NEC 7720. Three different performance measures, the conventional signal-to-noise ratio, the informal listening test, and an LPC(linear predictive coding)distance measure, have been used in this simulation. The necessary parameters have been optimized through the simulation. The developed hardware and software have been tested in real-time operation using a hardware emulator.

• 한국전자파학회논문지
• /
• 제22권12호
• /
• pp.1045-1059
• /
• 2011

3차원 다기능 레이더는 다수의 표적을 실시간으로 탐지, 추적하여 표적의 거리, 속도, 각도 정보를 추출하고 유도탄과의 교신을 통해 표적 위치 정보를 제공하는 최신 레이더이다. 본 논문에서는 다기능 레이더의 핵심 구성품이라 할 수 있는 고속 다중 DSP가 적용된 실시간 신호 처리기의 설계, 제작 및 성능 시험 결과에 대해 소개하였다. 기존의 CFAR 탐지 성능에 비해 열악한 클러터 환경에서 표적의 탐지 성능이 개선된 CFAR 알고리즘과 변별기 추정 방식을 이용한 정밀 표적 위치 측정 방법 및 최소값 추정 방식을 이용한 잡음 재밍 판단 알고리즘 등의 구현 결과들을 소개하였고, 성능 입증 시험을 통한 시험 결과들을 제시하였다.

• 한국음향학회지
• /
• 제32권4호
• /
• pp.346-353
• /
• 2013

본 논문에서는 노래반주기를 위한 고음질 오디오 시스템 구현에 관한 내용을 담고 있다. 노래반주기의 중요한 기능인 키/템포 변환 음질의 개선을 위하여 악기별 채널 분리를 수행하였다. 악기별로 채널을 분리하여 처리함으로 고음질의 변환이 수행됨을 상관계수의 변화와 MOS 평가를 통하여 확인할 수 있었다. 구현된 오디오 시스템은 TI사의 32비트 부동 소수점과 고정 소수점 연산이 모두 가능한 DSP인 TMS320C6747를 이용하였으며 다채널의 WMA 복호화, MP3 부호화와 복호화, wav, EQ 및 템포/키 변환을 실시간으로 수행 가능하다. WMA 10채널로 구성되어 악기별 분리 처리가 가능도록 하였다. 또한 MP3 부호화/복호화는 녹음과 재생 기능으로 이용되고 wav 채널은 효과음 등으로 사용 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1990-1992
• /
• 1998

A vector control scheme is widely used in AC drive system in these days. In this country for commercializing the system, it has lots of dependency on advanced foreign technology. Therefore we have developed high-performance vector controlled inverter sytems ourselves for two years whose capacitives are 15kW, 30kW and 45kW. For computation of data in high speed DSP is empolyed and by using a IGBT with high switching the current ripple is reduced. Consequently, developed drive systems have high performance and accurary on speed control. There are proved in experimental results.