• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.125-134
• /
• 2016

We propose an efficient high voltage level shifter for a high side Buck converter driving a light-emitting diode (LED) lamp. The proposed circuit is comprised of a low voltage pulse width modulation (PWM) signal driver, a coupling capacitor, a resistor, and a diode. The proposed method uses a property of a PWM signal. The property is that the signal repeatedly transits between a low and high level at a certain frequency. A low voltage PWM signal is boosted to a high voltage PWM signal through a coupling capacitor using the property of the PWM signal, and the boosted high voltage PWM signal drives a p-channel metal oxide semiconductor (PMOS) transistor on the high side Buck converter. Experimental results show that the proposed level shifter boosts a low voltage (0 to 20 V) PWM signal at 125 kHz to a high voltage (370 to 380 V) PWM signal with a duty ratio of up to 0.9941.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.69-72
• /
• 2001

High-level synthesis generates a structural design that implements the given behavior and satisfies design constraints for area, performance, power consumption, packaging, testing and other criteria. Thus, high-level synthesis generates that register-transfer(RT) level structure from algorithm level description. High-level syntehsis consist of compiling, partitioning, scheduling This paper we study the partitioning process, and analysis the min-cut algorithm and simulated annealing algorithm.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.73-76
• /
• 2001

High-level synthesis generates a structural design that implements the given behavior and satisfies design constraints for area, performance, power consumption, packaging, testing and other criteria. Thus, high-level synthesis generates that register-transfer(RT) level structure from algorithm level description. High-level synthesis consist of compiling, partitioning, scheduling. In this paper, we proposed the efficient scheduling algorithm that find the number of the functional unit and scheduling into the minimum control step with silicon area resource constrained.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.395-400
• /
• 2013

In this paper, we introduce the implementation of high accurate level sensor system using the pulse wave type magnetostriction sensor. When a current pulse flows along the waveguide, the magnetic field also propagates towards the end of waveguide. When this magnetic field just passes the position of the magnet for level detection, the resultant magnetic field by these two magnetic fields makes a torsional reflected signal. This is used to calculate the time difference between a interrogation pulse wave and this torsional reflected signal. The key elements and characteristics were investigated to implement level sensor system based on this principle. We introduce a method to calculate the speed of ultrasonic reflected signal and how to make a model of sensing coil. In particular, we experiment with the characteristics of the torsional reflected signal according to the changes of the interrogation voltage and displacement. To make high accurate level sensor system, two methods were compared. One is to use the comparator and time counter, the other is STFT(Short Time FFT) which is capable of the time-frequency analysis.

• ETRI Journal
• /
• v.40 no.1
• /
• pp.133-145
• /
• 2018

Robustness, payload, and imperceptibility of audio watermarking algorithms are contradictory design issues with high-level security of the watermark. In this study, the major issue in achieving high payload along with adequate robustness against challenging signal-processing attacks is addressed. Moreover, a security code has been strategically used for secure transmission of data, providing tamper detection at the receiver end. The high watermark payload in this work has been achieved by using the complementary features of third-level detailed coefficients of discrete wavelet transform where the human auditory system is not sensitive to alterations in the audio signal. To counter the watermark loss under challenging attacks at high payload, Daubechies wavelets that have an orthogonal property and provide smoother frequencies have been used, which can protect the data from loss under signal-processing attacks. Experimental results indicate that the proposed algorithm has demonstrated adequate robustness against signal processing attacks at 4,884.1 bps. Among the evaluators, 87% have rated the proposed algorithm to be remarkable in terms of transparency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1494-1500
• /
• 1999

In order to provide high speed multimedia data rate service, Multi-Code CDMA has been proposed which converts high speed serial data stream into N parallel low speed data streams with orthogonal PN codes for spreading. However this signal has multi level and causes interferences to be increased at the neighboring cell boundary in the reverse link. Therefore in order to solve the above mentioned problem, M/B-MC/CDMA, in which multi level signal is converted to binary level signal using M/B conversion, is proposed and the performance is compared with MC-CDMA.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.137-140
• /
• 2000

In this paper, we have proposed an efficient test generation method for asynchronous circuits. The test generation is based on specification level, especially on Signal Transition Graph(STG)〔1〕 which is a kind of specification method for asynchronous circuits. To conduct a high-level test generation, we have defined a high-level fault model, called single State Transition Fault(STF) model on STG and proposed a test generation algorithm for STF model. The effectiveness of the proposed fault model and its test generation algorithm is shown by experimental results on a set of benchmarks given in the form of STG. Experimental results show that the generated test for the proposed fault model achieves high fault coverage over single input stuck-at fault model with low cost. We have also proposed extended STF model with additional gate-level information to achieve higher fault coverage in cost of longer execution time.

• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.239-243
• /
• 2007

The evaluation and comparison have been made for the EMI noise which was included in the signal from the sensors in the acoustic emission testing for the bottom plate of ground tank at full. The EMI signal has been classified into two types. One is the signal with very short AE count, and this signal possibly can be filtered by front end filter setting of the channel count with low level of 4 and high level of $10^8$. The other EMI signal occurred from CH 1, CH 3 and CH 10, and had high and constant duration with high energy and count (maximun duration > $10^5\;{\mu}s$), and has characteristic gradient of accumulation amplitude distribution. This signal should be removed in the AE signal evaluation by filtering, because this may affect to the total gradient.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.145-148
• /
• 2002

This paper has been studied a predistorter which is able to linierizing of RF amplifier using schottkey. If input signal level is low, input signal is delivered directly. And if input signal level is high, input signal Is delivered with decreasing. So RF amplifier always works at saturation region .When this predistorter is used to simplified C-class RF amplifier, we have concluded that efficiency is improved about 3%.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.53-57
• /
• 2005

In order to measure signal quality of optical disc such as CD or DVD, jitter is used traditionally. The signal attained from a disc by optical pick-up is processed by analog circuits. And then, binary signal can be obtained by using proper silcer. After the signal is changed into binary format, jitter is calculated as a time difference between the binary signal and the reference time. Jitter is used to express the signal quality. In this paper, a new method that is able to offer more precise measurement of the signal quality fur high density optical disc than the jitter is proposed. We named it LPSNR (Level Peak Signal to Noise Ratio). The relationship between bER (bit error rate) and LPSNR is shown in the paper.