• 제목/요약/키워드: High Flow Rate

검색결과 3,258건 처리시간 0.029초

소형 오리멀젼 보일러의 연소특성 연구 (Study on the Combustion Characteristics of a Small-Scale Orimulsion Boiler)

  • 김혜숙;신미수;장동순;최영찬;이재구
    • 대한환경공학회지
    • /
    • 제27권10호
    • /
    • pp.1081-1089
    • /
    • 2005
  • 본 연구에서는 기존에 중유를 사용하는 상용보일러에서 오리멀젼 연료의 활용 가능성을 평가하기 위하여 소형 보일러에서 오리멀젼 연료의 기본적인 연소특성을 실험과 더불어 수치해석하였다. 오리멀젼의 주요 연소특성은 최고 화염온도가 버너로부터 $20{\sim}30\;cm 뒤쪽에 나타나는 화염지연현상과 비교적 넓게 분포하는 화염의 형태로 이는 오리멀젼 제조과정에서 포함된 높은 수분함량과 미세한 수부액적으로 이한 미소폭발 현상에 기인한다. 오리멀젼 연료의 연소특성에 미치는 영향을 평가하기 위하여 연료공급량, 무화유체의 종류, 그리고 계산에 사용된 현상학적인 복사모델과 같은 중요한 설계 및 운전인자에 대한 일련의 변수연구를 수행하였다. 연소특성인 최고 화염온도 지연현상은 연료공급 속도를 조절함으로써 어느 정도 저감시킬 수 있었으며 연소생성물로 CO와 $SO_2$ 그리고 NO가스의 연소로 내 발생특성을 평가하였다. 또한 무화용 유체로 증기를 사용하였을 경우 로내 연소상태는 무화용 공기에 비해 안정화 되고 고온영역이 감소되는 결과를 보였다. 일반적으로 본 연구에서 수행한 실험조건에 대한 수치해석 결과는 물리적으로 일관성 있는 결과를 제시하였으나 오염물질 생성농도에 대한 보다 정확한 예측을 위해서는 추후 현상학적인 모델개선을 필요로 한다. 결국 본 연구로부터 개발된 컴퓨터 프로그램은 기존의 상용화 중유 보일러에서 오리멀젼 연료로 대체 사용시 개선사항 및 유용한 운전 자료를 제공할 것으로 판단된다.

유역모형을 활용한 제주도 한천 유역의 관측유량 평가 및 보완 (Evaluation and complementation of observed flow in the Hancheon watershed in Jeju Island using a physically-based watershed model)

  • 김철겸;김남원
    • 한국수자원학회논문집
    • /
    • 제49권11호
    • /
    • pp.951-959
    • /
    • 2016
  • 본 연구에서는 제주도의 한천 유역을 대상으로 유역모델링 기법으로 많이 활용되고 있는 SWAT 모형을 이용하여 실시간 관측되고 있는 하천유량의 신뢰성과 활용성을 평가하였다. 평상시 거의 건천의 형태를 나타내는 간헐하천 특성을 고려하기 위하여 기존 연구에서 검증되었던 간헐하천모의 알고리즘을 적용하였으며, 2008~2013년을 대상으로 유역별 관측사상과 모의사상을 비교 분석하였다. 모형효율과 결정계수를 통해 모형 적용성을 평가한 결과, 보정기간에 대해 모형효율(ME) 0.88, 결정계수($R^2$) 0.93, 검증기간에 대해서는 각각 0.79와 0.89로서 매우 양호한 것으로 분석되었다. 모의치와 관측치의 차이가 크게 나타나는 일부 사상들에 대한 검토 결과, 강수량에 비해 관측유출률이 너무 크거나 낮은 경우가 있었는데 이는 기존 호우시 유출률 및 모델링 결과와 비교할 때 관측유량의 계측 및 수위-유량 산정과정에서의 오류의 가능성을 예상할 수 있었다. 이러한 관측유량에 대한 보완을 위해 모의자료를 이용하여 강수량과 유출량 간의 회귀관계를 도출하였으며, 2009~2010년을 대상으로 회귀식을 적용한 결과 유역모델링에 의한 모의유량과 잘 일치하는 것으로 나타났다. 따라서, 모델링 결과가 충분한 신뢰성을 보장한다는 가정 하에, 유도된 회귀식을 활용하여 신뢰성 있는 유출량을 간편하게 예측할 수 있으며, 관측자료의 결측치나 이상치를 즉각적으로 검증하는 데에도 활용될 수 있을 것으로 판단된다. 본 연구에서와 같이 관측자료의 검증 및 결측치에 대한 보완을 통하여 모형 적용시 보정과정에서의 오류를 최소화함으로써 제주도 지역의 독특한 유출 특성을 고려한 정교한 모델링과 물수지 분석에 크게 기여할 수 있을 것으로 판단된다.

Simultaneous Determination of B Group Vitamins in Supplemented Food Products by High Performance Liquid Chromatography-Diode Array Detection

  • Suh, Joon-Hyuk;Yang, Dong-Hyug;Lee, Byung-Kyu;Eom, Han-Young;Kim, Un-Yong;Kim, Jung-Hyun;Lee, Hye-Yeon;Han, Sang-Beom
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권8호
    • /
    • pp.2648-2656
    • /
    • 2011
  • A simple HPLC-DAD method was developed and validated to determine B group vitamin content (thiamine, riboflavin, nicotinamide, pantothenic acid, pyridoxine and folic acid) in supplemented food samples, i.e., infant formula, cereal, low-calorie food, a multi-vitamin pill and a vitamin drink. In this study, the most significant advantages were simultaneous determination of the six B group vitamins in various food matrices and a small number of sample treatment steps that required only an organic solvent, acetonitrile. Moreover, this method prevents reduction of column durability, because the mobile phase does not contain ion-pairing reagents. Analytes were separated on a Develosil RPAQUEOUS $C_{30}$ (4.6 mm ${\times}$ 250 mm, 5 ${\mu}M$ particle size) column with a gradient elution of acetonitrile and 20 mM phosphate buffer (pH 3.0) at a flow rate between 0.8 and 1.0 mL/min. Detection was performed at 275 nm, except for that of pantothenic acid (205 nm). The calibration curves for all six vitamins showed good linearity with correlation coefficients ($r^2$) higher than 0.995. The developed method was validated with respect to linearity, intra- and inter-day accuracy and precision, limit of quantification (LOQ), recovery and stability. The method showed good precision and accuracy, with intra- and inter-assay coefficients of variation less than 15% at all concentrations. The recovery was carried out according to the standard addition procedure, with yields ranging from 89.8 to 104.4%. This method was successfully applied to the determination of vitamin B groups in supplemented food products.

헤테로폴리산 촉매를 이용한 TAME, ETBE 및 MTBE 합성반응의 연구 (Synthesis of TAME, ETBE, and MTBE Using Heteropolyacid Catalyst)

  • 박진화;이용우
    • 공업화학
    • /
    • 제8권4호
    • /
    • pp.582-588
    • /
    • 1997
  • 고체산 촉매인 헤테로폴리산 촉매를 이용하여 대기오염 방지를 위한 옥탄가 향상제인 TAME, ETBE 및 MTBE 합성반응에 대한 실험을 고정층 상압유통식 반응장치에서 수행하였다. 일반적으로 TAME, ETBE 및 MTBE 합성반응에서 헤테로폴리산에 hetero원자와 poly원자를 치환시켜 비교한 결과, 배위된 poly원자가 W, hetero원자가 Si인 $H_4SiW_{12}O_{40}$ 촉매의 활성이 가장 우수하였고, 또한 치환된 금속에 따라 촉매의 활성이 달랐으며 이는 촉매의 산성질과 관련이 있음을 알 수 있었다. 헤테로폴리산 촉매를 이용한 합성반응에서 TAME 경우는 $FeHPW_{12}O_{40}$$K_3PM_{o12}O_{40}$이 비교적 활성이 좋았으나, ETBE나 MTBE 경우에 비해서는 다소 활성이 낮았다. 그리하여 본 연구에서는 활성이 좋은 헤테로폴리산 촉매들을 선정하여 각각에 대하여 1:1로 다음과 같이 혼합하여 $H_4SiW_{12}O_{40}$ : $Sr_2SiW_{12}O_{40}$, $H_4SiW_{12}O_{40}$ : $NaH_2PW_{12}O_{40}$, $Fe_{1.5}PW_{12}O_{40}$ : $Mg_2SiW_{12}O_{40}$$Mg_2SiW_{12}O_{40}$ : $Ba_2SiW_{12}O_{40}$ 실험한 결과, 혼합촉매들이 각각의 단일성분 촉매때보다 TBA의 전화율과 ETBE나 MTBE의 선택율이 더욱 향상되었음을 알 수 있었다.

  • PDF

HPLC를 이용한 노루오줌 추출물의 Avicularin 및 Quercitrin 분석법 개발 (Analytical Method Development of Avicularin and Quercitrin in Astilbe chinensis Extract Using HPLC)

  • 권진관;정연우;서찬곤;홍성수;신현탁;정수영;최정준;김진규
    • 대한화장품학회지
    • /
    • 제45권4호
    • /
    • pp.333-340
    • /
    • 2019
  • 본 연구는 노루오줌(Astilbe chinensis) 추출물을 기능성 화장품소재로 개발하기 위해 avicularin, quercitrin을 지표성분으로 선정하고, 품질관리를 위해 high performance liquid chromatography (HPLC)를 이용하여 분석법을 개발하였다. 분석용 칼럼은 Capcell Pak C18 MGII을, 이동상은 0.05% (v/v) trifluoroacetic acid (TFA)와 아세토니트릴을 사용하여 컬럼 온도는 30℃ 에서 유속 1.0 mL/min 로 검출파장은 254 nm에서 검출하였다. International conference on harmonization (ICH) 가이드라인(version 4, 2005)을 근거로 하여 특이성, 직선성, 정밀성, 정확성, 검출한계 및 정량한계를 분석하여 분석방법을 검증하였다. 분석결과, 검출한계 및 정량한계는 avicularin 0.094 및 0.285 mg/mL, quercitrin 0.031 및 0.095 mg/mL로 나타났으며, 검량곡선은 상관계수 값이 avicularin 0.99990, quercitrin 0.99994로 양호한 직선성을 보였고 정밀성 분석결과도 avicularin 0.59%, quercitrin 0.63% 이하로 확인되었다. 또한, 회수율은 avicularin 100.97 ~ 101.77%, quercitrin 100.18 ~ 100.32% 범위로 정확성이 있음을 알 수 있다. 따라서, 본 분석법은 노루오줌 추출물 지표성분의 분석법으로 적합한 시험법임이 검증되었다.

공기중 염화비닐단량체 포집시 온도가 파과현상에 미치는 영향 (The Effect of Temperature on the Breakthrough of Charcoal Tube During Vinyl Chloride Monomer Sampling)

  • 박윤정;이상회;김치년;원종욱;노재훈
    • 한국산업보건학회지
    • /
    • 제8권1호
    • /
    • pp.115-123
    • /
    • 1998
  • Vinyl chloride monomer exists as gas phase at normal temperature and reacts with oxygen and strong oxidant in the air to form oxidized materials. Because of being easily synthesized, it is used as a main source at the synthetic reaction process of PVC synthesis factories. Ministry of Labor regulates its usage as a carcinogen and its exposure level as 1 ppm. But the amount of VCM production in PVC and VCM production process hasn't been exactly estimated. In addition, facilities of this factory are located in outdoor. Therefore, this study was designed to investigate effects of temperature on breakthrough of charcoal tube at a fixed concentration and temperature during VCM sampling based on NIOSH and OSHA methods which were used as methods of occupational environment measuring and analysis. During the sampling of VCM, methods of OSHA and NIOSH require flow rate of 0.05 lpm and sampling volume of $3{\ell}$, $5{\ell}$ respectively, at this time carbon molecular sieve tube and coconut shell charcoal tube are used to observe the breakthrough along with concentration and temperature. As a result, significant difference between average adsorbed amounts of OSHA methods but that of NIOSH methods cannot be found. NIOSH method is likely to be effected by high temperature and normal temperature in high concentration. Breakthrough is not found in the method of OSHA at different conditions of temperature and concentration. As the result of this study we could verify that breakthrough occurred in the process of sampling VCM with NIOSH methods. Therefor in summer time, breakthrough should be considered and research on the breakthrough volume should be done. It is considered the research about the specificity of the coconut shell charcoal and carbon molecular sieve sorbent should be done when sampling VCM in comming days.

  • PDF

뇌졸중환자(腦卒中患者) 290례(例)에 대(對)한 임상(臨床) 고찰(考察) (III) ('Clinical Observation on the 290 cases of Cerebrovascular Accident')

  • 강관호;전찬용;박종형
    • 대한한의학회지
    • /
    • 제18권2호
    • /
    • pp.223-244
    • /
    • 1997
  • Clinical observation was done on 290 cases of patients who were diagnosed as CVA with brain CT, TCD, MRI scan and clinical observation. They were hospitalized in the oriental medical hospital of Kyung-Won University from 1st January to 31st December in 1996. 1. The cases were classified into the following kinds : cerebral infarction, cerebral hemorrhage, and transient ischemic attack. The most case of them was the cerebr진 infarction. 2. There is no significant difference in the frequency of strokes in male and female. And the frequency of strokes was highest in the aged over 50. 3. In cerebral infarction the most frequent lesion was the territory of middle cerebral artery, and in cerebral hemorrhage the most frequent lesion was the basal ganglia. 4. The most ordinary preceding disease was hypertension, and the next was diabetes. 5. The rate of recurrence was high in cerebral infarction. 6. The frequency of strokes seems to have no relation to the season. 7. The cerebral infarction occurred usually in resting and sleeping, and the cerebral hemorrhage in acting. 8. The course of entering hospital, most patients visited this hospital as soon as CVA occurred. And the half of patient visited this hospital within 2 days after CVA attack. 9. In the cases of patients who were unconscious at the admission, the prognosis was worse than that of the alert patients. 10. The common symptoms were motor disability and verbal disturbance. 11. The average duration of hospitalization was 27.4 days, and in case of cerebral hemorrhage the duration was prolonged. 12. The average time to start physical therapy was 13.3rd day after stroke in cerebral infarction and it was 19.9th day after stroke in cerebral hemorrhage. 13. The common complications were urinary tract infection, pneumonia, myocardial infarction and so on. 15. At the time of entering hospital, in most cases the blood pressure was high, but blood pressure was well controlled at the time of discharge. 16. Generally reported, hypercholesterolemia and hypertriglyceridemia are usually found in cerebral infarction. But in this study, they were found more frequently in cerebral hemorrhage than in infarction. 17, In the most cases, western and oriental medical treatments were given simultaneously. 18. In acute or subacute stage, the methods of smoothening the flow of KI(順氣), dispelling phlegm(祛痰), clearing away heat(淸熱) or purgation(瀉下) were frequently used. And in recovering stage, the methods of replenishing KI(補氣), tonifying the blood(補血) or tranquilization(安神) were frequently used.

  • PDF

Evaluation of Cardiac Function Analysis System Using Magnetic Resonance Images

  • Tae, Ki-Sik;Suh, Tae-Suk;Choe, Bo-Young;Lee, Hyoung-Koo;Shinn, Kyung-Sub;Jung, Seung-Eun;Lee, Jae-Moon
    • 한국의학물리학회지:의학물리
    • /
    • 제10권3호
    • /
    • pp.159-168
    • /
    • 1999
  • Cardiac disease is one of the leading causes of death in Korea. In quantitative analysis of cardiac function and morphological information by three-dimensional reconstruction of magnetic resonance images, left ventricle provides an important role functionally and physiologically. However, existing procedures mostly rely on the extensive human interaction and are seldom evaluated on clinical applications. In this study, we developed a system which could perform automatic extraction of enpicardial and endocardial contour and analysis of cardiac function to evaluate reliability and stability of each system comparing with the result of ARGUS system offered 1.5T Siemens MRI system and manual method performed by clinicians. For various aspects, we investigated reliability of each system by compared with left ventricular contour, end-diastolic volume (EDV), end-systolic volume (ESV), stock volume (SV), ejection fraction (EF), cardiac output (CO) and wall thickness (WT). When comparing with manual method, extracted results of developed process using minimum error threshold (MET) method that automatically extracts contour from cardiac MR images and ARGUS system were demonstrated as successful rate 90% of the contour extraction. When calculating cardiac function parameters using MET and comparing with using correlation coefficients analysis method, the process extracts endocardial and epicardial contour using MET, values from automatic and ARGUS method agreed with manual values within :t 3% average error. It was successfully demonstrated that automatic method using threshold technique could provide high potential for assessing of each parameters with relatively high reliability compared with manual method. In this study, the method developed in this study could reduce processing time compared with ARGUS and manual method due to a simple threshold technique. This method is useful for diagnosis of cardiac disease, simulating physiological function and amount of blood flow of left ventricle. In addition, this method could be valuable in developing automatic systems in order to apply to other deformable image models.

  • PDF

유채대의 이단 고온 처리에 의한 알콜 발효용 당화물 생산 (Two-step High Temperature Pretreatment Process for Bioethanol Production from Rape Stems)

  • 한재건;오성호;정명훈;김승섭;서현범;정경환;장영석;김일철;이현용
    • KSBB Journal
    • /
    • 제24권5호
    • /
    • pp.489-494
    • /
    • 2009
  • 우리 연구팀은, 농산부산물인 유채대의 알콜 발효용 당화물 생산 가능성을 연구하였다. 이를 위해 농산부산물인 유채대를 연속적으로 5 mL/min의 속도로 산을 이용하지 않고 증류수만을 이용해 이단 고온 처리 ($200^{\circ}C$ and 15 Mpa, $375^{\circ}C$ and 23 Mpa)하였다. 본 전처리 공정을 통한 가수수분해물의 당화물 생성은 최종적으로 자일로스와 글루코스의 경우 25.6 g/L, 5.5 g/L가 생성되었다. 이는 유채대에 존재하는 글루코스와 자일로스의 초기 양 대비 각각 18%와 59%의 전환 수율을 나타낸다. 또한 이 공정은 타 공정들에 비하여 대표발효 저해 산물인 HMF의 생성량이 0.2 ppm으로 극히 낮은 수치를 보였으며, 가수분해물의 에탄올 생산시, 글루코스의 발효를 통한 에탄올 생성 전환수율이 90% 이상으로 높은 생성율을 보였다. 따라서 본 공정을 통해 다른 농산부산물이나 해조류 전체에 응용된다면, 고 수율의 에탄올 생산용 당화물을 생산할 것으로 예상한다.

고효율 자외선/광촉매 시스템을 이용만 고농도 유기성 폐수처리 (Treatment of highly concentrated organic wastewater by high efficiency $UV/TiO_{2}$ photocatalytic system)

  • 김중곤;정효기;손주영;김시욱
    • KSBB Journal
    • /
    • 제23권1호
    • /
    • pp.83-89
    • /
    • 2008
  • 음식물쓰레기를 처리하기 위한 3단계 메탄발효시스템으로부터 유출되는 음식물 발효 폐액은 고농도 유기성 폐수이다. 유기성 폐수는 고도처리 시스템에 의해 방류기준에 적합하게 처리되어져야만 한다. 본 연구에서는 유기성 폐수를 처리하기 위해 고효율 $UV/TiO_{2}$ 광촉매 산화공정의 최적 운전 조건을 조사하였다. 첫 번째 공정에서 폐수에 응집제인 $FeCl_{3}$를 전처리 하였으며, 응집을 위한 최적 pH와 응집제의 농도는 각각 pH 4와 2000 mg/L이었다. 이 공정을 통하여 최대 52.6%의 COD가 제거되었다. 두 번째는 $UV/TiO_{2}$ 광촉매 산화공정으로, 최적 운전 조건은 중심파장이 254 nm, 폐수 온도 및 pH가 각각 $40^{\circ}C$와 pH 8, 반응기 주입 공기량이 40 L/min인 것으로 조사되었다. 응집제를 이용한 전처리 공정과 광촉매 산화공정을 병합하여 최적조건에서 폐수를 처리할 경우 T-N과 COD의 제거율은 각각 69.7%와 70.9% 이었다.