• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.177-187
• /
• 2021

The effect of nanoparticle volume fraction on the elastic properties of a polymer-based nanocomposite was experimentally investigated and the obtained results were compared with various existing theoretical models. The nanocomposite was consisted of high density polyethylene (HDPE) as polymeric matrix and 0, 0.5, 1 and 1.5 wt.% multi walled carbon nanotubes (MWCNTs) prepared using twin screw extruder and injection molding technique. Nanocomposite samples were molded in injection apparatus according to ASTM-D638 standard. Therefore, in addition to morphological investigations of the samples, tensile tests at ambient temperature were performed on each sample and stress-strain plots, elastic moduli, Poisson's ratios, and strain energies of volume units were extracted from primary strain test results. Tensile test results demonstrated that 1 wt.% nanoparticles presented the best reinforcement behavior in HDPE-MWCNT nanocomposites. Due to the agglomeration of nanoparticles at above 1 wt.%, Young's modulus, yielding stress, fracture stress, and fracture energy were decreased and Poisson's ratio and failure strain were increased.

• Elastomers and Composites
• /
• 제15권1호
• /
• pp.3-9
• /
• 1980

일정온도와 압력에서 상업용 고분자필름들의 산소투과도와 산소투과방지도에 관하여 연주하였다. 산소투과방지 도는 산소특과도의 역수로 정의하고 coulometric oxygen permeability tester를 사용하여 $23{\pm}1^{\circ}C$, latm에서 24시간 동안 투과한 산소의 량을 측정하였다. 산소투과방지도의 상대적 크기는 다음과 같은 순서로 감소함을 밝혔다. 연신 Nylon (O. Nylon)> 연신 Polyester (O. PET)> 무연신 Nylon (N. Nylon)> 무연신 Polyester(N. PET)> 경질 Polyvinyl chloride (Rigid PVC)> 반경질 Polyvinyl chloride (Semirigid PVC)> 연신 Polypropylene (O. PP)> 연질 Polyvinyl chloride (P. PVC)> 무연신 Polypropylene (C. PP)> 저밀도 Polyethylene(LDPE)> 고밀도 Polyethylene (HDPE, Inflation)> 고밀도 Polyethylene (HDPE, T-die) 필름들의 산소투과방지도는 고분자의 극성, 필름의 두께 및 기계적 연신성의 증가에 따라서 증가하고 PVC에서는 가소제 첨가에 따라서 감소하였다. 포장재료로서 고분자 필름은 고분자 주쇄에 극성이 있는 필름과 극성이 없는 필름들을 산소 및 습기투과방지를 위하여 첩합하여야 한다.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.247-255
• /
• 2017

Scutellaria Baicalensis(SB) is widely used in traditional and modern oriental medicine. It possesses several biology activities such as anti-oxidative, anti-inflammatory, antimicrobial and antiviral activities. In this study, a functional high density polyethylene (HDPE) fabric with antimicrobial properties was developed using zeolite microparticles as a SB extract delivery carrier. Zeolites loaded with SB extract were prepared by immersing in an SB extract aqueous solution. The average size of the SB extract-loaded zeolites was about 0.1 to $2.0{\mu}m$, and the morphology of the zeolites was not altered after SB extract binding. The resulting SB extract-loaded zeolites were then immobilized homogeneously onto the HDPE fabric using acrylic binder. The encapsulation efficiency of SB extract to the zeolite was more than 45%. The in vitro release test of SB extract-loaded zeolites containing HDPE fabrics showed release of 35% of the total SB extract by day 1 in a 24hours immersion study. Moreover, the SB extract-loaded zeolites containing HDPE fabrics showed effective antimicrobial activity against Streptococcus mutans, Staphylococcus aureus, and Klebsiella pneumoniae, indicating that this innovative delivery platform potently imparted antimicrobial activity to the HDPE fabric. In conclusion, the current study suggests that the HDPE fabric containing the SB extract-loaded zeolites microparticle carrier system has potential as an effective antimicrobial textile such as safety gloves, protective gloves etc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.137-138
• /
• 2019

The strengths and elastic modulus of high-density polyethylene in compression and tension met the minimum requirements of precast concrete products.

• 한국안전학회지
• /
• 제27권1호
• /
• pp.26-31
• /
• 2012

Wood-plastic composites represents a growing class of materials used by the residential construction industry and furniture industry. In this study, the effect of flame retardants on the flammability and mechanical properties of wood flour-high density polyethylene(HDPE) composites were studied. we were manufactured wood flour-HDPE composites by modular intermeshing co-rotating twin screw extruder with L/D ratio of 42. The flame retardant properties were used limiting oxygen index(LOI) and mechanical properties were measured by universal testing machine(UTM). The Morphological analysis of composites were analyzed by Scanning electron microscope(SEM). It was found that Ammonium polyphosphate can effectively reduce the flammability of the wood flour-HDPE composites. Marginal reduction in the mechanical properties of the composites was found with addition of flame retardants. SEM images showed that the coupling agent improved wood flour-HDPE interfacial bonding.

• 한국응용과학기술학회지
• /
• 제23권4호
• /
• pp.307-318
• /
• 2006

The pyrolysis of high density polyethylene(HDPE) and low density polyethylene(LDPE) was carried out at temperature between 425 and $500^{\circ}C$ from 35 to 80 minutes. The liquid products formed during pyrolysis were classified into gasoline, kerosene, gas oil and wax according to the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. The conversion and yield of liquid products for HDPE pyrolysis increased continuously according to pyrolysis temperature and pyrolysis time. The influence of pyrolysis temperature was more severe than pyrolysis time for the conversion of HDPE. For example, the liquid products of HDPE pyrolysis at $450^{\circ}C$ for 65 minutes were ca. 30wt.% gas oil, 15wt.% wax, 14wt.% kerosene and 11wt.% gasoline. The increase of pyrolysis temperature up to $500^{\circ}C$ showed the increase of wax product and the decrease of kerosene. The conversion and yield of liquid products for LDPE pyrolysis continuously increased according to pyrolysis temperature and pyrolysis time, similar to HDPE pyrolysis. The liquid products of LDPE pyrolysis at $450^{\circ}C$ for 65 minutes were ca. 27wt.% gas oil, 18wt.% wax, 16wt.% kerosene and 13wt.% gasoline.

• 대한화학회지
• /
• 제23권5호
• /
• pp.329-337
• /
• 1979

국내에서 상업용으로 이용하는 여러종류의 고분자 필름들에 대한 투습도를 일정한 압력과 상대습도 하에서 측정하고 투습도의 역수를 구하여 각 필름의 방습도로 정의하였다. 실험온도 $40{\pm}1^{\circ}C$, 상대습도 $90{\pm}2%$ 하에서 시료를 24시간 방치한 후 컵방법으로 필름의 방습도를 측정한 결과 다음과 같은 순서로 감소함을 밝혔다. 연신 polypropylene (O. PP) > 고밀도 polyethylene (HDPE, Inflation) > 고밀도 polyethylene (HDPE, T-die) > 무연신 polypeopylene (C. PP) > 무연신 polyester (N. PET) > 저밀도 polyethylene (LDPE) > 연신 polyester (O.PET) > 경질 polyvinyl chloride (Rigid PVC) > 반경질 polyvinyl chloride (Semirigid PVC) > 연질 Polyvinyl chloride (Nonrigid PVC) > 연신 nylon(O.Nylon) > 무연신 nylon (N.Nylon) 또한 온도증가에 따라서 측정한 결과 방습도는 HDPE, (T-die) > C. PP > O. PET > LDPE > O. Nylon으로 감소하였고, LDPE, HDPE (T-die), C. PP, O. PET, O. Nylon 필름들의 투습활성화 에너지는 12.0, 11.1, 11.4, 11.7, 14.1 kcal/mole임을 밝혔다. 필름의 투습도는 극성증가에 따라서 증가하고 PVC 필름은 가소제 첨가에 따라서 증가하며, 필름 두께와 연신 증가에 따라서는 감소하였다. O. PP/LDPE, N.Nylon/LDPE, C.PP/LDPE이 집합필름은 단일필름보다 두께에 대한 의존성이 증가하였다.

• 접착 및 계면
• /
• 제22권3호
• /
• pp.106-110
• /
• 2021

최근 친환경 소재, 특히 부산물을 활용한 연구가 주목을 받고 있다. 본 연구에서는 비료 제조 시 발생하는 공정 부산물인 석고(CaSO₄)를 고밀도 폴리에틸렌(High density polyethylene, HDPE)에 충전한 복합재료의 물성을 조사하였다. Co-rotating twin screw extruder를 이용하여 석고의 함량을 0~20 wt% 충전하여 복합재료를 제조하고 이의 기계적, 유변학적, 열적 특성을 평가하였다. 그 결과 인장강도는 미충전 HDPE 대비 4.1% 이하로 물성 저하가 크지 않다. 석고의 함량이 증가할수록 열적 안정성이 향상되었고 석고의 함량이 복합재료의 점도 특성에 거의 영향을 끼치지 않는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1337-1340
• /
• 2009

Electrical properties of a fluorinated carbon black (CB)-filled high-density polyethylene (HDPE) polymeric switch were investigated as a function of fluorination pressure at 0.1 ~ 0.4 MPa. From the FT-IR results, the absorption spectra of the fluorinated CB show an absorption band at 1400 ~ 1000 $cm^{-1}\;for\;{\nu}_{C-F}$ and the peak intensity increased with increasing fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content increased with increasing fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB decreased with increasing fluorination pressure. Consequently, the increase of fluorine contents of CB made a disappearance of negative temperature coefficient (NTC) behavior of the polymeric switch, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulted from the decreasing of London dispersive component of the surface free energy for CB particles.

• 한국수소및신에너지학회논문집
• /
• 제34권3호
• /
• pp.307-315
• /
• 2023

The physical and chemical changes exhibited by high density polyethylene (HDPE) after treatment with hydrogen at a pressure of 90 MPa followed by rapid release of the hydrogen were studied. X-ray diffraction, differential scanning calorimetry, thermo gravimetric analysis, and attenuated total reflectance (ATR)-fourier transform infrared (FTIR) were used for this purpose. As a result, it was found that the degree of crystallinity of HDPE decreased after hydrogen pressure treatment, while the average thickness of lamellae that constitute the crystals and the melting temperature of the crystalline region actually increased. The decomposition temperature also increased by about 3℃. In addition, it was found that the hydrogen bonding network between -OH groups in the HDPE sample was strengthened and partial chain scission occurred. These cut chains were found to be terminated by oxidative degradation such as cross-linking between chains, -C=O, -C-O, and -CHO, or by the formation of -CH₃ at the chain ends, as confirmed by ATR-FTIR.