• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.117-128
• /
• 2010

Advancements in digital image have put high quality digital camera into the hands of many image professionals and consumers alike. High quality digital camera images consist originally of raw which have a set of color rendering operation applied to them to produce good images. With color rendering, the raw file was converted to Adobe RGB and sRGB color space. Also color rendering can incorporate factor such as white balance, contrast, saturation. Therefore, in this paper we conduct a study on production of optimum profile considered color rendering in digital camera. To do the experiment, the images were Digital ColorChecker SG target and ColorChecker DC target. A profiling tool was ProfileMaker 5.03. The results were analyzed by comparing in color gamut of $CIEL^*a^*b^*$ color space and calculating ${\Delta}E^*_{ab}$. Also results were analyzed in terms of different $CIEL^*a^*b^*$ color space quadrants based on lightness, chroma.

• 한국광학회지
• /
• 제35권3호
• /
• pp.95-106
• /
• 2024

일반 백색 LED의 연색성을 보완하기 위해 적색 양자점을 선택적으로 활용함으로써 고연색성 조명을 구현하는 연구가 최근 활발하다. 본 논문에서는 최근 이루어지고 있는 원격 양자점 부품 연구 및 이를 활용한 고연색성 조명 개발의 현황에 대해 소개한다. 특히 양자점 부품이 배치되는 조명의 광구조 최적화에 있어서 중요하게 고려해야 할 다양한 요소를 집중적으로 논의함으로써 향후 고연색성 조명 연구의 방향 및 전망까지 다루고자 했다.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.1-6
• /
• 2003

본 연구에서는 광원의 색온도와 연색성의 차이에 의한 밝음의 느낌을 연구하기 위하여 이종 램프간, 또한 동종 램프 간의 비교 실험을 시각 대상물로 흑백 인쇄문자지와 색상지를 사용하여 수행하였다. 백열전구, 형광램프, 고압 나트륨램프, 메탈헬라이드램프, 무전극 방전램프를 대상으로 실험을 수행한 결과, 이종 광원의 경우 밝음의 느낌 비는 백열전구를 제외한 광원의 경우 대체적으로 평균연색계수에 비례하는 경향이 있으며, 모든 시험 대상 광원의 경우 색온도에 비례하는 것으로 나타났다.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.438-440
• /
• 2005

At present, characteristic of high color reproduction for LCD TV is needed in Display market according to start mass production of LCD TV. Therefore development target for LCD is focused on improvement of color reproduction. The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But decrease of luminance and panel transmittance is caused by alteration of Color Filter. Accordingly, we completed LCD with high color reproduction by the most suitable emission spectrum of CCFL phosphor at panel with conventional color filter. In this experiment, we knew that LCD applied to CCFL with high color rendering characteristic had color reproduction range of 81% compared with NTSC in CIE color coordinate. According to increase of intensity peak and alteration of Red, Green, Blue phosphor spectrum, we made LCD with high color reproduction characteristic. In conclusion we achieved improvement of color reproduction ratio by alteration of CCFL phosphor without changing color filter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.961-965
• /
• 2006

White organic LED spectrum for lighting and displaying should be designed for high luminous efficiency as well as good chromaticity coordinate, pleasant correlated color temperature and color rendering. A program based on Matlab was made to make these calculations convenient. The chromaticity coordinate and luminous efficiency was calculated according to the CIE 1931 colorimetric system, while the correlated color temperature(CCT) was calculated based on CIE 1960 UCS diagram. The color rendering characteristics were evaluated according to the CIE Color Rendering Index (CRI), using Ra, Ri and ${\bigtriangleup}E$ from the 14 color samples defined in CIE13.3.

• Journal of Information Display
• /
• 제11권3호
• /
• pp.123-127
• /
• 2010

Fluorescent white organic light-emitting diodes showing high color-rendering indices (CRIs) of up to 81 was demonstrated, with a silicon-cored anthracene derivative (PATSPA) doped with DPAVBi utilized as the deep-blue host and dye materials, and the commercial dyes rubrene and DCM2 utilized as the orange- and red-light-emitting dyes. The devices, consisting of three emissive layers, showed bright-white-light emission, but the ratio of the blue peak to the orange and red peaks changed with the current density and the thickness of the blue emissive layer. A high CRI was achieved with the use of a deep-blue emitter doped in a novel host and by optimizing the blue-layer thickness. The device with a blue-layer thickness of 10 nm showed the Commission Internationale de l'Eclairage (CIE) color coordinate of (0.33, 0.35), a high CRI of 81, and a moderate external quantum efficiency of 2% at a current density of $2.5\;mA/cm^2$.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.47-56
• /
• 2010

For a human being's smooth activity, the clean air and comfortable lighting environment are needed. The suitable lighting environment is obtained generally by making it available for being formed the bright situation easy for seeing object and the visually comfortable atmosphere. In this way, even the lighting environment was changed along with economic development. Even a light source was diversified. Thus, several kinds of new light sources such as LED, OLED, PLS, and CNT came to appear. Halogen lamp, which has low efficiency due to high color rendering among lamps of being used now, is being much used yet. However, owing to radiation of UV and IR, there are many limitations to the subject in general exhibition lighting, museum, and art museum. Accordingly, a research was performed on filter that is blocked UV and IR at the same time, by using halogen lamp that is excellent in color rendering and in life.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.11-15
• /
• 2017

Red phosphors, $Sr_2Si_5N_8:Eu^{2+}$, were synthesized as a single-phase crystal structure by optimizing carbon and $Eu^{2+}$ contents in a carbothermal reduction nitridation method. With increasing $Eu^{2+}$ contents, the photoluminescence spectra were red-shifted from 600 nm peak for 1 mol% for to 700 nm for 7 mol%. It was suggested that this red shift is attributed to the energy transfer from one low-energy sited $Eu^{2+}$ (1) to other high-energy sited $Eu^{2+}$ (2). Finally, the best red sample (620 nm emission peak and 80 nm half width for 3 mole% of $Eu^{2+}$) was packaged on a Blue LED together with two additional green and yellow phosphors, the fabricated White LED showed a high color-rendering index of 90 and white color coordinates of x= 0.321 and y = 0.305.

• 감성과학
• /
• 제15권3호
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.