• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.89-95
• /
• 2014

An LED lighting which adjusted brightness according to the surround ambient implemented using PWM technology and power devices. To measure the brightness of surround ambient a CdS sensor was used. A control board for the generation of the PWM signal was made using a MCU and duty ratio was controlled according to light intensity of surround ambient of the system. To drive the LED lamps which require high-voltage and high-current power devices were used for switching the DC power supply. Measurement results show that the IGBT is excellent as only lineality but the PowerBJT is more good to consider to efficiency and cost.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.62-69
• /
• 2010

LCD panel need BLU(Back Light Unit) that is outside source of light because can not emit light voluntarily. BLU is used in LCD module and is used in tester that examine LCD panel's badness. Lately, BLU had changed from CCFL(Cold Cathode Fluorescent Lamp) to LED(Light-Emitting Diode) fast. CCFL need extra-high tension power and produce much heat and is difficult to keep fixed brightness. LED is few electric power wastage and keeps fixed brightness. But, BLU that is used to detector that examine the LCD module is using CCFL until recently. This paper develops LED BLU that can examine LCD panel's badness. Also, this manufactures LED BLU to 24 inch size to examine all LCD panels(12~24 inch), and develops so that LED BLU may operate according to LCD panel's size.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2585-2587
• /
• 2001

This paper suggests a method of color variation technique to generate stable white light. The light from high brightness RGB LED was mixed according to the RGB LED luminance ratio. A microcontroller-based PWM control circuit and switching circuit is used to achieve full color variation. It is confirmed that the stable white light and full color variation is possible.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.135-141
• /
• 2013

In this paper, we installed three high brightness red, green, and blue LED in one socket and made one pixel unit. And we also developed the full-color display board module and control unit which can express various images such as text, graphics, video image with the combination of pixel units and a number of modules. LED display driver module have a driver circuit within the combination of the RGB pixel dot on unit area. These modules of the existing form can be high priced because of implementation a fixed resolution in specific space and installation space. To overcome these shortcomings, we developed a LED driver and LED pixel modules free in array at random pitch intervals. Display board module of this paper enabled to display smoothly video image which have many data processing quantity through dragging data speed up 36 frames per second. Also there are an effect which is provided more clear image because of improving the flickering of the existing display board.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.146-154
• /
• 2016

Visible light communication using LED is a technique for transmitting digital data using the light of the LED. Recently, high-speed data rate plays an important role. Therefore, many scholars have researched the MIMO-VLC which is able to increase data rate using a lot of LED transmitters. However, it has problems such as light interference and flicker when transmitting different bit. Many researcher have focused on reduce interference. However it is not considered about flicker problem. Flicker is defined unstable brightness. It occurred the tired of human eyes, lowers eyesight and also decreases concentration. In order to solve this flicker problem in MIMO-VLC, we propose the PFM(Parallel Flicker Mitigation) code. PFM code using combinatorial theory can maintain constant brightness the whole bit duration. Therefore, it is possible to assure the brightness by confirm simulation results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.54-55
• /
• 2005

• Photonics industry news
• /
• s.9
• /
• pp.10-17
• /
• 2002

고휘도 발광 다이오드 시장은 지난 5년 동안 연평균 58%의 성장을 거듭해 2000년에는 12억달러에 이르렀고 전체 발광 다이오드 시장의 42%를 차지했다. 시장 조사 전문 회사인 Strategies Unlimited사가 최근에 발표한 보고서'High Brightness LED Maket Review and Forecast 2001'에 따르면 이러한 성장은 향후 5년동안에도 계속되어 2005년에는 34억 달러에 이를 전망이라고 한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.17.1-17.1
• /
• 2011

Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as a type of implantable LED biosensor and as a therapy tool.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.270-271
• /
• 2007

LED를 이용한 램프개발 다목적 램프, 실내 조명용이나 전광판의 디스플레이용, 간판의 채널래터용으로 이용가능, LED 램프의 효율을 향상을 위해 반사판 설계, 3차원 설계로 반사판 설계 후 포토피아로 시뮬레이션 반사판과 글로브 형태 및 재질에 따른 광효율시뮬레이션

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1261-1267
• /
• 2007

Although LEDs have been used in various applications with improving the brightness and luminous efficacy, the electrical and optical characteristics of high power LED varies at different temperature and starting time. In this paper, optimal heat sink and apparatus design were conducted using IR camera and ICEPAK on the LED bulb consisting with fourteen LED array. The temperatures of heat sink and LED device of the designed LED bulb without cooling pan were $74^{\circ}C\;and\;96.8^{\circ}C$, respectively, showing in good themal characteristics. For high efficiency driving circuit of LED array adopted optimal heat sink design, driving circuits of constant voltage and current circuits were suggested and fabricated. As a result the efficacy of all driving circuits showed more than 20 lm/W. Also, the constant current circuits are suitable for signal lamp, hallway lamp, and flash lamp having short operating time(about 30 min). On the other hand, a reading light and indoor lamp having long operating time can be controlled by constant voltage circuit.