• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.39-46
• /
• 2005

Though a fully thermally coupled distillation column-an energy efficient distillation system-consumes less energy, it is not widely implemented in practice due to its operational difficulty. A 3-column distillation system having improved operability is proposed here, and its energy saving performance and application related issues are investigated from the implementation result to a practical hexane process. When an energy integration is employed, the proposed system requires 18% less energy than a conventional 2-column system, which is found from the HYSYS simulation. Though more control loops than the 2-column system are required, the proposed system has better controllability of product compositions and the pressure control of the system is easier.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.504-507
• /
• 2002

A separation/purification process for enzymatic sugar ester production was investigated The crude reaction mixture contained sugar ester and unreacted fatty acid in acetone. The reaction mixture was mixed with KOH/phosphate buffer. Hexane was then added to enhance phase separation. Three phases formed: a lower aqueous phase containing nothing of interest, a polar organic solvent middle phase that contained mostly fatty acid soaps, and a hexane-rich upper phase that contained mostly sugar ester. Distribution coefficient of each component was measured.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.466-474
• /
• 2002

The analytical method of 14 kinds of coplanar - PCBs was established and applied the soil sample. The three kinds of extraction solvents (toluene, acetone: n-hexane, dichloromethane) were selected to apply the soil sample. The silica gel, florisil and alumina column cleanup also performed to compare the elution recovery. The average recovery of selected solvents in soil A, B and C was surveyed the 84.25%, 56.09% and 44.69% for toluene, 52.56%, 81.42% and 58.53% for acetone : n - hexane and 55.94%, 71.33% and 61.05% for dichloromethane. The average recovery is represented 49.99% for silica gel (n - hexane 100 mL), 69.65% for florisil (6% ether/n - hexane 100 mL), and 65.23% for alumina (2% DCM : n - hexane 100 mL, 50% DCM: n-hexane 150 mL). In silica gel (n - hexane) and florisil (6% ether : n - hexane) cleanup, the 14 kinds of coplanar PCBs eluted until 40 mL. In the silica gel and florisil columns cleanup, the amounts of elution solvent can be reduced from these results, but the researcher has to confirm the elution amounts before performing the experiments. In alumina cleanup process, the result was obtained to the 100 mL of elution solvents (2% DCM: n-hexane 100 mL and 50% DCM: n-hexane 40 mL), therefore the change of elution solvent is necessary to develop the simple procedure.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.1
• /
• pp.1-13
• /
• 2018

A series of experiments using transparent micromodels with an artificial pore network etched on glass plates was performed to investigate the effects of flow rate on the migration and distribution of resident wetting porewater (deionized water) and injecting non-wetting fluid (n-hexane). Multicolored images transformed from real RGB images were used to distinguish n-hexane from porewater and pore structure. Hexane flooding followed by immiscible displacement with porewater, migration through capillary fingering, preferential flow and bypassing were observed during injection experiments. The areal displacement efficiency increases as the injection of n-hexane continues until the equilibrium reaches. Experimental results showed that the areal displacement efficiency at equilibrium increases as the flow rate increases. Close observation reveals that preferential flowpaths through larger pore bodies and throats and clusters of entrapped porewater were frequently created at lower flow rate. At higher flow rate, randomly oriented forward and lateral flowpaths of n-hexane displaces more porewater at an efficiency close to stable displacement. It may resulted from that the pore pressure of n-hexane, at higher flow rate, increases fast enough to overcome capillary pressure acting on smaller pore throats as well larger ones. Experimental results in this study may provide fundamental information on migration and distribution of immiscible fluids in subsurface porous media.

• Analytical Science and Technology
• /
• v.35 no.6
• /
• pp.237-241
• /
• 2022

The effect of washing fingerprints deposited on glass that were contaminated with a flammable liquid (gasoline, kerosene, diesel, and thinner) was studied by washing with hexane or heptane. The fingerprints were visualized using fuming cyanoacrylate, followed by basic yellow 40 staining. After comparing the washing effect, by dividing one fingerprint into four sections, it was confirmed that the ridge detail was damaged by dissolving the fingerprints in flammable liquid. As a result of washing fingerprints contaminated with flammable liquids using hexane or heptane, fingerprints contaminated with gasoline, kerosene, and thinner did not show a washing effect because the ridge detail was damaged at the time of contamination, and only fingerprints contaminated with diesel exhibited improved ridge detail quality. Because hexane and heptane washing damage the ridge detail, it was found that fingerprints contaminated with gasoline, kerosene, and thinner were better enhanced directly without the washing process. In addition, it was found that the amount of the washing solvent and contact time should be minimized when washing fingerprints contaminated with diesel.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.276.3-277
• /
• 2003

A simple, accurate GC analytical technique for the determination of phthalates. commonly used as plasticizers during the manufacturing process of PVC bags, in blood component preparations was developed and validated. The blood component preparations were extracted with n-hexane. The n-hexane layer was evaporated to dryness and the residue was dissolved in 1 $m\ell$ of n-hexane and analyzed by GC and GC/MS. (omitted)

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.21-26
• /
• 1996

Commercially available Chines oriental lacquer was treated to get two fractions, hexane soluble fraction and hexane insoluble fraction. Hexane soluble fraction was subjected to thermal curing process. Films obtained from the lacquer under normal conditions and obtained from thermal curing were compared. The compounds in hexane soluble fraction were copolymerized with 1,6-diisocyanohexane, and toluendiisocyanate(TDI). Films obtained by thermal curing were highly brittle and hydrophobic while the films obtained under normal conditions were hydrophilic. Curing reaction did not occur when oxygen was not available.Some of the major component in the lacquer was isolated by HPLC and UV spectrum of each compound was recorded.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.109-115
• /
• 2023

The extraction and adsorption characteristics for three phenolic ketones with high physicochemical similarity among phenolic compounds, which are alcohol fermentation inhibitors in lignocellulosic biomass hydrolysates, were investigated. The most suitable basic extractant for selectively separating acetosyringone from three phenol ketones by reactive extraction was found to be trioctylphosphine oxide. In addition, it was found that adsorption using XAD16, a polymer neutral resin adsorbent, or physical extraction using hexane, was a suitable separation method for separation of 4'-hydroxyacetophenone (HAP) and acetovanillone (AVO). A five-step fractionation process including extraction and adsorption mentioned above has been first proposed to separate and concentrate the three phenol ketones present at equal mass percentages. When physical extraction with n-hexane and re-extraction with an aqueous NaOH solution were used as the steps 4 and 5 in the fractionation process respectively, it was possible to obtain almost 70% or more of the purity of three phenolic ketones.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.276-280
• /
• 2001

The self-assembled formation of octadecanethiol (CH3(CH2)17SH) on a gold substrate was studied using a quartz crystal microbalance (QCM) and a scanning tunneling microscope (STM). From the QCM measurements at vario us concentrations of octadecanethiol solutions in hexane and alcohol, the adsorption process of octadecanethiol onto Au was confirmed to consist of two steps as follows: (i) fast but disordered adsorption and (ii) a thermodynamically controlled rearrangement for uniform packing of octadecanethiol. Also, it was revealed that the adsorption rate became faster in ethanol than in hexane since less solubility of octadecanethiol in ethanol could help the formation of the monolayers. At 5 ${\times}$10-7 M solution, the monolayer formation was monitored by STM. The morphology of monolayer region was initially circular (diameter size: 7.26 $\pm$ 2.1 nm) and gradually changed to a stripe type after several minutes. At higher concentration, the self-assembled monolayer was formed immediately after the solution was introduced to a substrate.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.29-36
• /
• 2004

These experiments were conducted to analyze the characteristics of organic compounds and molecular weight distribution according to the treatment steps of purifying system for pig wastewater. The results obtained are summarized as follow. 1. Raw pig wastewater contained 31 kinds of organic compounds such as acetic acid, 2-butanone, hexane, chloroform, propionic acid, butanoic acid etc. 2. After ozone treatment, 13 kinds of organic compounds such as ethene, pentane, 2-methylopropanal, hexane, furan and so on were detected in the wastewater. 3. After $TiO_2$ treatment, 12 kinds of organic compounds such as ethene, hexane, chloroform, 1-decene, silane and so on were detected from the effluent. 4. After both ozone and $TiO_2$ treatment, portion of molecular weight smaller than 500 Daltons and molecular weight between 500 to 1,000 Daltons in the wastewater increased.