• 제목/요약/키워드: Heptane pool fire

검색결과 40건 처리시간 0.026초

터널 화재시 배연속도가 연소율변화에 미치는 실험적 연구 - Heptane 풀화재 경우 (An Experimental Study on the Ventilation velocity of the Variation of Burning rate in Tunnel Fires - Heptane pool fire case)

  • 유홍선;양승신
    • 한국터널지하공간학회 논문집
    • /
    • 제7권2호
    • /
    • pp.109-117
    • /
    • 2005
  • 본 연구는 터널내 화재시 배연속도가 연소율 변화에 미치는 영향을 파악하기 위하여 Froude scaling에 의해 1/20 크기로 축소한 모형화재 실험을 수행하였다. 화원으로는 4.5cm~8.5cm의 헵탄을 사용하였으며 발열량은 3.71~15.6 kW이다. 연소율은 로드셀을 이용하여 산출하였고, 연기거동을 파악하기 위하여 K형 열전대를 이용하여 온도분포를 측정하였다. 풍동은 터널 상류 한쪽부분과 연결하였고, 터널 공간의 배연속도를 제어하기 위하여 풍동의 인버터를 조정하였다. 헵탄 풀화재인 경우 배연속도가 증가할수록 충분한 산소의 공급으로 연소율은 증가하였으며, 같은 무차원 속도($\bar{V}$) 일때 화원 크기가 작아짐에 따라 연소율은 증가하였다.

  • PDF

종류식 배연 터널 화재시 배연속도가 연소율에 미치는 영향에 대한 실험적 연구 (An Experimental Study on the Effect of Ventilation Velocity on the Burning Rate in Longitudinal Ventilation Tunnel Fires)

  • 양승신;유흥선;최영기;김동현
    • 설비공학논문집
    • /
    • 제17권10호
    • /
    • pp.914-921
    • /
    • 2005
  • In this study, the 1/20 reduced-scale experiment using Froude scaling were conducted to investigate the effect of longitudinal ventilation velocity on the burning rate in tunnel fires. The methanol pool fires with heat release rate ranging from 2.02 kW to 6.15 kW and the n-heptane pool fires with heat release rate ranging from 2.23 kW to 15.6 kW were used. The burning rate of fuel was obtained by measuring the fuel mass at the load cell. The temperature distributions were observed by K-type thermocouples in order to investigate smoke movement. The ventilation velocity in the tested tunnel was controlled by inverter of the wind tunnel. In methanol pool fire, the increase in ventilation velocity reduces the burning rate. On the contrary in n-heptane pool fire, the increase in ventilation velocity induces large burning rate. The reason for above conflicting phenomena lies on the difference of burning rate. In methanol pool fire, the cooling effect outweighs the supply effect of oxygen to fire plume, and in n-heptane pool vice versa.

알칼리 금속염을 함유한 미분무수의 헵탄 Pool Fire 소화 (Extinguishment of n-heptane Pool Fire by Water Mist Containing Alkali Metal Agent)

  • 박재만;신창섭
    • 한국안전학회지
    • /
    • 제20권3호
    • /
    • pp.105-111
    • /
    • 2005
  • An experimental study is performed for extinguishing of n-heptane pool fire by water mist containing potassium acetate as a fire suppression additive. Water mist was generated by a single pressure nozzle in a small-scale chamber. The drop size distribution of water mist was measured using laser diffraction(Malvern particle sizer). The flame temperature, oxygen concentration and carbon monoxide concentration were measured. In case of using additives, the fire extinguishing time was shorter than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing additives was increased. And also dissociated metal atoms, potassium, were reacted as a scavenger of the major radical species OH, H which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

헵탄의 화원 직경 변화를 고려한 대형콘칼로리미터의 발열량 측정 결과 분석 (Analysis of Heat Release Rate with Various Diameter of Heptane Pool Fire Using Large Scale Cone Calorimeter)

  • 유우준;남동군;염문천;김성찬;유홍선
    • 한국화재소방학회논문지
    • /
    • 제28권5호
    • /
    • pp.1-7
    • /
    • 2014
  • 본 연구에서는 대형 콘 칼로리미터(large scale cone calorimeter, LSC)를 사용하여 헵탄 풀 화재(pool fire) 실험에서 화원의 직경 변화에 따른 발열량(HRR) 측정 결과를 정량적으로 분석하였다. 발열량에 중요한 영향을 미치는 연소율(burning rate)은 A. Hamins의 연구 자료에서 제시한 모델링 곡선과 비교하여 정확성을 검증하였으며, 산소 소모법에 의한 연소효율(combustion efficiency)은 이론발열량에 비해서 91% 정도로 J. Gore이 제시한 헵탄의 연소효율 92%와 유사한 것을 확인하였다. 엔탈피소모법에 의한 열손실은 전체 발열량의 54% 정도로 측정부에서 대류 발열량으로 측정되었으며, 본 연구 결과는 화재실험에서 발열량 측정값의 신뢰성 분석(reliability analysis)을 위한 기초 연구 자료로 활용하는데 유용한 정보가 될 것으로 사료된다.

화점높이 변화에 따른 Pool Fire의 연소특성 (Combustion Characteristics of Pool Fire by Height of Fire Source)

  • 박형주;차종호
    • 한국산학기술학회논문지
    • /
    • 제11권11호
    • /
    • pp.4671-4676
    • /
    • 2010
  • 화점높이 변화에 따른 풀 화재의 연소특성을 알아보기 위하여 인화성액체인 메탄올과 노르말 헵탄을 $100mm{\times}100mm{\times}50mm$ 크기의 사각형 용기에 내에 넣고 연소실험을 하였다. 용기의 재질은 스테인레스를 사용하였다. 연소시간, 질량감소속도, 화염온도, 화염높이 및 외부에서 화염으로의 공기유입속도 등을 측정하였으며 연소시 화염의 거동은 비디오카메라를 이용하여 촬영하였다. 실험을 통해서 화점의 높이가 증가할수록 외부에서 화염으로 유입되는 차가운 공기의 유입량이 증가하여 풀 화재의 연소특성이 감소함을 확인 할 수 있었다.

Pool 화재의 연소 특성에 관한 연구 (A Study on the Characteristics of Pool Fire)

  • 오규형;나선종;이성은
    • 한국화재소방학회논문지
    • /
    • 제18권3호
    • /
    • pp.39-44
    • /
    • 2004
  • Pool화재의 화염 거동을 알아보기 위하여 산업에서 많이 사용되는 가연성 액체인 아세톤 메탄을 헥산 그리고 헵탄을 직경 50mrn에서 400nun까지의 용기 내에 넣고 연소실험을 하였다. 용기의 재질은 스테인리스와 구리를 사용하였다. 연소시간과 용기 벽면의 온도 및 열유속 등을 측정하였으며 연소 시 화염의 거동은 비디오카메라를 이용하여 촬영하였다. 실험을 통해서 연소속도와 화염의 높이는 용기 직경의 증가와 함께 증가하였으며 화염의 와류 생성 주기는 용기 직경에 반비례하였다. 또한 pool화재의 특성은 액체연료의 물리 화학적 성질과 용기의 재질에 의해서도 영향을 받는 것을 알 수 있었다.

헵탄 풀화재에서 불활성기체 소화농도 (Extinguishing Concentration of Inert Gases in Heptane Pool Fires)

  • 정태희;이의주
    • 한국안전학회지
    • /
    • 제27권3호
    • /
    • pp.71-76
    • /
    • 2012
  • The coflow velocity effect on the minimum extinguishing concentration(MEC) was investigated experimentally in heptane cup-burner flames. Various inert gases($N_2$, Ar, $CO_2$, He) were added into the oxidizer to find the critical concentration and the effectiveness of the agents on flame extinction. The experimental results showed that the MECs were increased with increasing coflow velocity for most inert gases except helium, but the higher coflow velocity induced the lower burning rates of heptane. This indicated that the increase of coflow velocity resulted in the decrease of fuel velocity evaporated from fuel surface, and hence the stain rate on the reaction zone was also decreased. In the case of helium as a additive, the extinguishing concentration was independent of the coflow velocity because the heat conductivity was ten times larger than the other inert gases and flow effect by a strain rate might be compensated for heat loss to the surroundings.

구난역을 갖는 철도 터널 내부의 연기거동 특성 (Characteristics of Smoke Propagation in Railway Tunnels with Rescue Station)

  • 장원철;김동운;이성혁;유홍선
    • 한국화재소방학회논문지
    • /
    • 제23권4호
    • /
    • pp.13-18
    • /
    • 2009
  • 본 연구의 목적은 구난역을 갖는 철도 터널 내부의 연기 거동 특성을 분석하는 것이다. 특히 화재 위치 변화에 따른 연기 전파 특성에 대해 수치해석을 수행하고 이때 해석 조건으로 사용되는 발열량은 터널내 풀 화재(pool fire) 실험을 통해 결정된다. 사용된 연료는 n-heptane($C_7H_{16}$)이고, 각 변의 길이가 4cm인 정사각형 풀을 이용하였다. 본 연구에서는 상용코드인 FLUENT(Ver.6.3) 를 사용하여 수치해석을 수행하였고 화원 생성 현상은 MVHS(Modified Volumetric Heat Source) 모델을 통해 모사되었다. 해석 결과, 연기가 터널을 따라 전파되면서 구난역까지 영향을 미치는 것을 확인할 수 있었으며 따라서 배연시스템의 설치가 요구됨을 알 수 있다. 또한 교행로와 방화벽이 연기 제어에 기여함을 확인하였다.

구획 화재 시 벽면 재료 특성과 헵탄의 질량유속 상관관계 실험 (Experiment on the Correlation between Mass Flux of Heptane and Material Property of Wall in Compartment Fire)

  • 박정욱;신연제;김정용;유우준
    • 한국화재소방학회논문지
    • /
    • 제33권1호
    • /
    • pp.39-44
    • /
    • 2019
  • 본 연구에서는 구획 화재 시 벽면을 구성하고 있는 재료 특성과 질량 유속의 상관관계를 분석하였다. 이를 위해서 내화보드와 철판 각각을 사용하여 폭 0.3 m, 높이 0.5 m 그리고 길이 3.0 m의 한 쪽 면이 밀폐된 구조물을 제작하였으며, 헵탄 풀 화재 실험을 수행하여 연소면적 $0.01m^2$$0.0225m^2$ 각각에 대해서 화원의 위치 변화에 따른 질량 감소율을 산출하였다. 그 결과 헵탄의 질량 유속은 연소 초기 $0.0087kg/m^2{\cdot}s$에서 내화보드 구조물의 경우 최대 $0.166kg/m^2{\cdot}s$로 증가하였으며, 철판 구조물의 경우 최대 $0.019kg/m^2{\cdot}s$ 증가하는 것으로 나타났다. 이러한 결과는 구획 공간에서 화재 확산을 보다 정확하게 예측하기 위해서는 재료의 열적 특성과 기하학적 형상을 고려하여 화재시나리오가 구성되어야 하는 것을 의미한다.