• Transactions of the Society of Information Storage Systems
• /
• v.9 no.2
• /
• pp.48-50
• /
• 2013

In this work, we investigated the diffraction of inverse-hemisphere shaped polymer grating. The grating was fabricated by using soft lithography of hexagonally close-packed PS nanospheres. The periodicity of the grating was tuned by swelling in acetone and the diffraction wavelength shift induced from lattice change was measured. This device can be used as a strain gauge or a chemical sensor.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.240-244
• /
• 1999

This paper deals with the establishment of the cutting direction on inclined plane by using ball end mill. Ball-end milling is widely used for free form surface die and mold. In these machining, the cutting parts vary because the tool tip is hemisphere shaped. The cutting characteristics, such as cutting force, surface roughness and surface profile are varied according to the variation of cutting directions. The effective tool diameter was calculated on different tilt angles and tool-path. Tool life and cutting characteristics were estimated on variation of cutting directions in the same cutting speed. In this paper, the optimal cutting direction which can be applied 3-D sculpture surface cutting is suggested.

• Journal of the Korean Society of Costume
• /
• v.62 no.5
• /
• pp.96-107
• /
• 2012

In ancient times, immigrants from Baekje wore various kinds of costumes that provided technological and aesthetic guidance for the Japanese costume, which has been modified and changed in Japan. The clothing and ornaments were strongly influenced directly by costumes of the Baekje period; therefore, many of the Japanese costumes at that time were crafted in the Baekje style. Through the antique records, paintings of tombs and bequests, we were able to find similarities between Baekje and Japan costumes in these categories: clothes, headgear, belt hooks and belt plaques, bronze shoes, and ornaments. (1) Clothes : They wore high-shaped hat and jacket and trousers(;袴) tied the bottom. (2) Headgear : There was a gilt bronze Conical Cap attached to the long tube with terminals in the shape of a hemisphere. (3) Belt hooks and belt plaques: There were horse-shaped belt hooks in mane styles and a checkered pattern on the lower part of the haunch and a belt Plaque shaped like the face of an animal. (4) Gilt bronze shoes: They were made with the style that had two side plates fixed in the instep side and heel-side. (5) Ornaments : They were made with flower-shaped plaques and spiral-shaped decorations. One earring was made with a three-winged pendent that were connected in a chain style and the others were in unique forms that were made by connecting narrow rings and a heart-shaped pendent.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.433-440
• /
• 2020

In this study, a new type of Durometer was invented by modifying the currently used Durometer with the hemisphere shaped needle to columnar shaped needle. The aim of the study is, hence, to provide the feasibility of the advanced Durometer for assessing setting time of the concrete. Generally, the finishing of concrete surface should be conducted to secure the smooth surface, improve the permeability, and prevent the plastic shrinkage cracking. Although this surface finishing work should be conducted during the plastic phase between initial and final setting, currently in practical situations, the timing of starting the finishing work was determined by the sense of the worker. To improve this situation, Kato Junji suggested to use the hemisphere and needle shaped Durometers to determine the initial and final setting time, respectively. However, in this case, there are difficulties of using two different Durometers and of occurring failure of the Durometer due to the intruded cement paste. To prove the feasibility of new typed Durometer, setting time and surface hardness were evaluated by applying for the concrete with various replacing ratios of fly-ash and coal gasification slag as an aggregate.

• Journal of Navigation and Port Research
• /
• v.30 no.2
• /
• pp.161-166
• /
• 2006

In order to construct an Anechoic Chamber satisfying international standards for EMI testing, it has been recognized that the absorption characteristics of the EM wave absorber must be higher than 20 dB over the frequency band from 30 MHz to 18 GHz. In this paper, an EM wave absorber with super wide-band frequency characteristics was proposed and designed in order to satisfy the above requirements by using the Equivalent Material Constant Method(EMCM) and Finite Difference Time Domain(FDTD). The proposed absorber is to attach a pyramidal absorber onto a hemisphere-type absorber on a cutting cone-shaped ferrite. As a result, the proposed absorber has absorption characteristics higher than 20 dB over the frequency band from 30 MHz to more than 20 GHz.

• Advances in nano research
• /
• v.2 no.4
• /
• pp.211-217
• /
• 2014

The self-assembled strain-induced sub-micrometric islands and nanostructures are grown from In-As-Sb-P quaternary liquid phase on InAs (100) substrates in Stranski-Krastanow growth mode. Two samples are under consideration. The first sample consists of unencapsulated islands and lens-shape quantum dots (QDs) grown from expressly inhomogeneous liquid phase. The second sample is an n-InAs/p-InAsSbP heterostructure with QDs embedded in the p-n junction interface. The morphology, size and shape of the structures are investigated by high-resolution scanning electron (SEM) and transmission electron (TEM) microscopy. It is shown that islands, as they decrease in size, undergo shape transitions. Particularly, as the volume decreases, the following succession of shape transitions are detected: sub-micrometric truncated pyramid, {111} facetted pyramid, {111} and partially {105} facetted pyramid, completely unfacetted "pre-pyramid", hemisphere, lens-shaped QD, which then evolves again to nano-pyramid. A critical size of $5{\pm}2nm$ for the shape transformation of InAsSbP-based lens-shaped QD to nano-pyramid is experimentally measured and theoretically evaluated.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.828-834
• /
• 2023

In this paper, we studied an antenna that forms a wide beam width by applying a horn-shaped reflector to a patch array antenna. To implement a wide beam width, three patches were arranged in each of the four directions on a square microstrip substrate, and a horn-shaped reflector was applied to the rear of the array antenna. Through this structure, the vertical beam pattern formed from the patch was converted to a diagonal direction, and as a result, the beam widths formed in each of the four sectors were added to create a wide beam width close to a hemisphere. The proposed antenna was studied for application to UAV(unmanned aerial vehicle), and the simulation test results confirmed that the 4.5 dBi beam width was 146.8°.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.208-213
• /
• 2010

This paper deal with an analysis of the ground surface potential profiles using a hemispherical scaled-model. Because it is very difficult to draw valid conclusions concerning a general grounding problem from actual field data, scale model tests can be used to determine the ground surface potential profile around the grounding electrodes according to the configuration of grounding electrodes. In this work, a hemispherical vessel with a diameter of 1,100 [mm] was employed to simulate uniform soil and CDEGS program was employed to compare the measured and simulated results. As a result, the ground surface potential around the grounding electrode was significantly raised and the ground surface potential at the just upper point of ground electrode particularly was higher than other points. The ground surface potential of counterpoise was higher than other grounding electrodes such as mesh and grounding rods and the ground surface potential strongly depends on the frequency responses of grounding electrodes. Also the results measured with the small-sized model were in reasonably agreement with the data obtained from simulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.128-133
• /
• 2008

This paper describes underwater discharge phenomena and breakdown characteristics in case that the standard lightning impulse voltage is injected to the needle and spherical electrodes installed in the hemisphere water tank. The objective of this work is to understand the basic features related to transient ground impedance against lightning surges. The discharge luminous images were observed and the dependence of breakdown voltage on the polarity of applied voltage and water resistivity were investigated. As a consequence, streamer corona is initiated at the tip of needle and spherical electrodes and is propagated toward grounded tank with stepwise extension. The breakdown voltage characteristics measured as a function of water resistivity showed V-shaped curves. Breakdown voltage and time curve of needle electrode is higher than that of spherical electrode.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.323-327
• /
• 2003

Morphological characteristics and life cycle of Parnara guttata were studied from 2001 to 2002. Egg was hemisphere-shaped in pink. Larva was milky white or yellowish green color with 2.9-30.6 nm body length, depending on their developmental stages from 1 st to 5th instar. Pupa were grayish brown from 23.8 to 25.7 nm length, adults were yellowish brown color and body lengths were 17.4 nm and 16.2 nm and wing expanse lengths were 35.2 nm and 30.6 nm with female and male, respectively. At 25${\pm}$2$^{\circ}C$, each developmental periods was 4.5, 30.2, and 6.9 days with egg, larvae, and pupae, respectively. Also adult longevity were 10.1 for female, average number of egg was 205.5.