• 천문학회보
• /
• 제43권2호
• /
• pp.40.1-40.1
• /
• 2018

Among Type I supernovae, which show no evidence for hydrogen lines in spectra, Type Ib/c supernovae lack of strong Si absorption lines and are involved with massive progenitors. While strong helium absorption lines are present in Type Ib supernovae, narrow helium emission lines also can appear in some Type Ib that are often called Type Ibn supernovae (SNe Ibn). We consider helium giant stars as a promising progenitor candidate for SN Ibn and suggest the evolutionary scenario through binary systems using MESA code. In our models the range of primary mass is 11 - 20 solar mass, mass ratio is 0.5 - 0.9, and initial period is 1.5 / 1.7 / 2.0 / 2.5 / 3.0 day. In particular, we find that the evolution of the secondary star can overtake the primary through mass transfer from the secondary to the primary, which is so-called 'reverse case B' mass transfer. In such systems the secondary star may undergo a supernova explosion earlier than the primary star. In this case, the primary star evolves towards a single helium giant to become a SN Ibn progenitor. These cases are more frequent in relatively low initial primary mass.

• 비파괴검사학회지
• /
• 제13권3호
• /
• pp.31-38
• /
• 1993

포항가속기 저장링 진공챔버는 진공도가 $10^{-10}Torr$로 유지될 수 있도록 설계되었고, 초고진공에 적합하도록 TIG용접을 하여 헬륨에 대한 누설률이 $1{\times}10^{-10}Torr{\cdot}{\ell}/sec$ 이하의 기밀성이 요구되고 있다. 저장링 진공챔버에 적용된 TIG용접방법과 결함에 대해 논하고 누설검사에 사용된 헬륨누설검사기의 원리 및 검사방법에 대해서 보고하고자 한다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.895-901
• /
• 2023

Oxide-dispersion- strengthened nickel alloys with Hf additions are expected to present high temperature mechanical properties and durable helium resistance based on first-principles density functional theory (DFT) calculations. Energetic and charge density evaluations of the helium behaviors were performed in Ni matrix, Y₂Hf₂O₇ oxide and the oxide/matrix interface. With the presence of coherent Y₂Hf₂O₇ in Ni matrix, chances of helium bubbles in Ni can be greatly diminished. The helium atoms shall occupy the interfacial site initially, then diffuse into in the octahedral sites of Y₂Hf₂O₇, and these oxide-captured He atoms prefer to separate individually. Much higher diffusion barrier of He in Y₂Hf₂O₇ than in nickel is related to the strong hybridization between interstitial He-1s and nearest-neighboring O-2p orbitals.

• 공업화학
• /
• 제31권2호
• /
• pp.153-163
• /
• 2020

액체 수소는 기체 수소 부피의 약 1/800로 감소시킬 수 있어 동일 압력에서 기체 수소 대비 800배의 체적 에너지 밀도를 가지고 있고, 기체 수소에 비해 폭발 위험성이 낮고 수송이 용이하다는 장점이 있다. 하지만 수소 액화를 위해서는 대규모 시설투자가 필요하고, 단순 압축 저장방식에 비해 많은 에너지가 필요함으로써 경제성 문제가 수반된다. 따라서 에너지 절감형 수소액화공정 연구는 매우 중요하다고 볼 수 있다. 본 연구에서는 수소 액화를 위한 주요 공정으로 헬륨/네온(몰 비 80 : 20) 냉동사이클을 선정하고 화학공정모사기 AVEVA 사의 PRO/II ver. 10.2를 이용하여 공정모사 및 에너지 사용량을 도출하였다. 수소 액화를 위해 헬륨/네온 냉동사이클만을 사용하는 경우, SMR+헬륨/네온 냉동사이클을 사용하는 경우, C3-MR+헬륨/네온 냉동사이클을 사용하는 경우 에너지 사용량을 상호 비교하였다. 그 결과 수소 1 kg을 액화하는데 소요되는 압축기 총 소요 동력은 각각 16.3, 7.03, 6.64 kWh이었다. 헬륨/네온 냉동사이클만을 사용하는 것보다 상용화되어 있는 SMR 공정이나 C3-MR 공정을 사용하여 예냉하는 경우 에너지를 크게 절감할 수 있는 것을 확인하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.77-81
• /
• 2002

The helium recondensing type cryostat with 4 K GM cryocooler is fabricated in order to keep cryogenic state of two saddle type superconducting magnet opposite to each other designed maximum 0.3 T magnetic field, and 1270 mm diameter open bore. The current leads which consist of metal current leads made for brass sheet and HTS current leads made in American Superconductor$^{TM}$ intermediate cool down with cryocooler Thus , the cryocooler for helium recondensing is a 1.5W/4.2 K GM SUMITOMO cryocooler. While superconducting magnet is working of 1600 gauss to 200 A, the cryostat keep constantly the level of liquid helium at 0.05 bar gauge pressure.e.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1219-1224
• /
• 2004

The objective of this study is to propose an experimental calibration facility in which a heat flux sensor can be calibrated under conductive condition by using helium gas. The heat flux calibration facility was designed, simulated and manufactured for use in a high heat transfer condition. It delivers heat fluxes up to a maximum of 35 KW $m^{-2}$. A copper block heated electrically with 3.5 KW power is designed to produce uniform temperature up to 600 K across its face. High heat fluxes are provided between hot plate and cold plate by 1 mm height helium filled gap. A cold plate is maintained around 300 K through pool boiling using a refrigerant and water-cooled heat exchanger. A simulation was conducted to verify the design of the main test section. To verify the performance of calibration facility, a heat flux sensor was examined. The measured heat fluxes were compared to the calculated one.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.48-49
• /
• 2001

Cryogenic technology is one of the key technologies for fusion reactor equipped with superconducting coil for plasma confinement. The KSTAR(Korea Superconducting Tokamak Advanced Research)Project is in progress since 1996. Major parameters of the KSTAR tokamak are : major radius 1.8m, minor radius 0.5m, toroidal field 3.5 Tesla and plasma current 2MA with a strongly shaped plasma cross-section and double -null diverter. Considering practical engineering constraints, the KSTAR device is designed for a pulse length of 300 sec in up-graded operation mode but in the initial configuration would provide a pulse length of 20 sec provided by the poloidal coil system in base-line operation mode. The cryogenic system is composed as follows : cold box, helium compressor system, distribution box, helium gas buffer tank, helium gas purifying system, gas recovery system, liquid helium storage dewar, current lead box, current bus line and liquid nitrogen storage tank.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.145-145
• /
• 2010

It is observed from SEM images that many voids were created after annealed by helium gas. The PL spectra of the ZnO samples revealed the strong violet emission peaks at 3.05 eV with the relative weak near band edge UV emissions. It was concluded from experiment results that native $Zn_i$ and $V_o$ donor defect levels can be generated below the conduction band edge due to the incorporation of helium atoms decomposed from helium gas into the ZnO matrix. He atoms in ZnO matrix will affect the interface trap existing in depletion regions located at the grain boundaries, which leads to the creation of $Zn_i$ and $V_o$ donor defect levels.

• 한국자동차공학회논문집
• /
• 제1권3호
• /
• pp.34-45
• /
• 1993

This study aims to analyze the mixing characteristics of hydrogen considered as a new fuel for internal combustion engines. As the physical property of helium gas is similar to that of hydrogen, helium gas was used in this study. To analyze the steady and unsteady behavior of jet, helium gas was injected into the stationary atmosphere at the normal temperature and pressure. Concentration of helium gas in the center of jet flow is in inverse proportion with axial distance from the nozzle tip. This agrees with the free jet theory of Schlichting. The relative equation for dimensionless concentration to radial/axial distance the axial distance of potential core region, the cone angle a of the jet flow and the relative equation for arriving distance of the front of jet flow to the lapse of time are obtained. But free jet theory of Schlichting in the dimensionless concentration is not in agreement with the present experimental results of the distance of the radial direction. It needs more study. When the arrival frequency of jet flow is used as a parameter, the transition area changing from unsteady flow area into steady flow area becomes gradually wider downstream, but its ratio for the whole unsteady flow area gradually decreases.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 추계학술발표대회 요약집
• /
• pp.443-443
• /
• 2003