• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.37-44
• /
• 2008

To design the cockpit of Korean helicopter, anthropometric data for Korean helicopter pilots as a target population is necessary. The present study measured the body sizes of Korean helicopter pilots to design the cockpit of Korean helicopter, and compared the measurements with those of Korean civilian and the US Army. The sample size was 100 which determined by a statistical analysis. Anthropometric measurements were collected for 100 samples (male = 94, female = 6; age group = 20~40) of Korean helicopter pilots by applying standard measurement protocol. To compare three anthropometric data, Korean civilian and US Army data were controlled by considering age group (20~40) and gender ratio (male: female = 9:1) of Korean helicopter pilots. The average body sizes of Korean helicopter pilots were mostly similar to those of Korean civilian, however, lower limb related variables (hip breadth, popliteal height and thigh clearance) and shoulder-to-elbow length were significantly greater (1~7%) at α=0.05. Furthermore, the average body sizes for Korean helicopter pilots regarding lower limb length and thickness were significantly smaller than those of the US Army (1~12%); however, the average body sizes for Korean helicopter pilots regarding upper body related variables (sitting height, sitting eye height, and acromial height) and hip breadth were significantly greater (0.7~1.9%). Lastly, size variability for Korean helicopter pilots was significantly smaller than those of Korean civilian and the US Army. Anthropometric data for Korean helicopter pilots of the present study was applied to design and evaluate a Korean helicopter cockpit.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.2
• /
• pp.203-210
• /
• 2010

For the development of a better product which fits to the target user population, physical workloads such as reach and visibility are evaluated using digital human simulation in the early stage of product development; however, ergonomic workload assessment mainly relies on visual observation of reach envelopes and view cones generated in a 3D graphic environment. The present study developed a quantitative assessment method of physical workload in a digital environment and applied to the evaluation of a Korean utility helicopter (KUH) cockpit design. The proposed assessment method quantified physical workloads for the target user population by applying a 3-step process and identified design features requiring improvement based on the quantified workload evaluation. The scores of physical workloads were quantified in terms of posture, reach, visibility, and clearance, and 5-point scales were defined for the evaluation measures by referring to existing studies. The postures of digital humanoids for a given task were estimated to have the minimal score of postural workload by finding all feasible postures that satisfy task constraints such as a contact between the tip of the index finger and a target point. The proposed assessment method was applied to evaluate the KUH cockpit design in the preliminary design stage and identified design features requiring improvement. The proposed assessment method can be utilized to ergonomic evaluation of product designs using digital human simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.987-993
• /
• 2013

Korean Utility Helicopter(KUH) is the first korean-developed helicopter. Its first flight was performed in March 2010 and then its development was completed successfully by June 2012. During flight test phase, KUH faced various vibration problems and appropriate vibration-reduction devices were designed and applied to solve the problems. The vibration-reduction devices were applied to main rotor blades, main gear box(MGB) supporting structure, cockpit, cabin and pilot seats to reduce rotor-induced 4/rev vibration. Also, dome-fairing was introduced in order to reduce the tail-shake vibration. This paper shows design technique and flight test results for vibration-reduction devices that have been incorporated into KUH.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.813-822
• /
• 2010

Integrated data processing for display of flight critical data and mission critical data was conducted without additional display instruments using glass cockpit design. Based on a pre-designed flight critical system and a mission critical system, this paper shows an optimal design of subsystem integration. The design satisfies safety requirements of flight control systems(FCS) and requires minimized modification of pre-designed systems. By conducting integration test using System Integration laboratory(SIL), it is confirmed that the introduced design approach meets the safety requirements of the MEP system.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.341-358
• /
• 2015

Purpose: This paper presents graphic methods and desirability function approach to determine best vibration reducing configuration for Surion helicopter. Many flight tests were executed and nine vibration levels in cockpit, cabin, and engine room were measured in each test and analyzed to find optimal configuration. Methods: Graphic analysis methods such as matrix, scatter, and box plots are used to identify better vibration-reducing flight test conditions. As an integrated measure of the performance of 9 vibration levels desirability function approach is adopted. Results: Three vibration reducing configurations are found to be proper and one configuration is recommended. Conclusion: It is expected to be helpful to adopt graphic and desirability function methods presented in this paper in developing new products or systems like helicopters. For efficient and effective flight testing of helicopters, it will be necessary to have consistently homogeneous environment for flight testing and applying design of experiments techniques and analyzing test data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.99-104
• /
• 2003

This paper described the general dynamic point for rotor design and the design procedure of low vibration blade. Generally, rotor rotating natural frequencies are determined to minimize hub loads, blade vibration and to suppress ground resonance at rotor design stage. First, through rotor frequency diagram, natural frequencies must be far away from resonance point and rotating loads generated from blade can be transformed to non-rotating load to predict fuselage vibration. Vibration level was predicted at each forward flight condition by calculating cockpit's vertical acceleration transferred from non-rotating hub load assuming a fuselage as a rigid body. This design method is applied to design current Next-generation Rotor System Blade(NRSB) and will be applied to New Rotor which will be developed Further.