• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.46-54
• /
• 2023

Helicopter pilots are required to perform many visual workloads in topographical avoidance, flight path modification and navigation, because helicopters operate at very low altitudes. The helicopter-specific instability also require the pilot to have precise perception and control. This has caused frequent human error in helicopter accidents. In Korea, two to three cases have occurred annually on average over the past 10 years, and this trend has not decreased. The purpose of this study was to identify human error risks in advance to prevent helicopter accidents and to help develop measures for missions and mission phases with high risk of human error. Through the study, the tasks and mission phases where accidents occur frequently were classified and the risk of human error was calculated for each mission phases. To this end, the task of frequent accidents during helicopter missions was first identified, detailed steps were classified, and the number of accidents was analyzed. Next, the AHP survey program was developed to measure the pilot's risk of human error and the survey was conducted on the pilots. Finally, the risk of human error by helicopter mission and by mission phases calculated and compared with the actual number of accidents.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.348-357
• /
• 2013

This work describes an approach that contributes to derive from mission to critical functions of the attack helicopter under future battle space environment. An existing mission of the attack helicopter is limited to the only shooter oriented functions. In the future environment, mission and its functions of the helicopter might be much expanded. The functions should be derived by the top down approach based on systems engineering approach. In this point of view, this work describes network based future battle environment. From this environment, the missions of the attack helicopter are identified and optimized functions are derived through sequential procedures like from missions to tasks, tasks to activities, and activities to functions. The selected activities are obtained from the tasks using QFD. The weighting scores of the QFD are calculated by the AHP computational procedure. Finally the critical functions are presented through the similar procedure.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.2
• /
• pp.28-35
• /
• 2008

The purpose of this study is to develop a training scenario for KA-32T helicopter simulator. First, the concept of training scenario are classified into training elements and training information. Secondly, the training elements are defined according to the property of each element: flight phase, situation, and environment. The main mission of KA-32T on the operation of KFS(Korea Forest Service) is the forest fire extinguishment mission, and it is divided into the two disciplines: water supply and water discharge. Finally the mission scenario for two disciplines are defined and developed as the combination of the normal procedures of training scenario and the mission procedures.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.59-66
• /
• 2011

In this paper, a method to allocate a submarine search mission to an ASW(Anti-Submarine Warfare) helicopter is proposed. The aim of the proposed method is to increase the submarine detection capability. For this purpose, we modeled the behaviors that the ASW helicopter conduct during the search mission, and the relations between the behaviors are also modeled. To measure quantitatively the effectiveness of ASW search mission, the measure of effectiveness(MOP) is defined. Scenarios are designed to analyze the effectiveness utilizing the ASW mission model. We conducted simulations applying the designed scenarios and some parameters concerned with the friendly ship and the enemy submarine interacting each other in the ASW missions. We analyzed the result of simulation depending on the dipping interval and the pattern of dipping positions in the situation that the helicopter operates for a long time and should resupply several times on the friendly ship. From the analyzed data, we suggested the practical value of ratio between the detectable range of the sonar and the dipping interval to improve the effectiveness of ASW mission.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.63-68
• /
• 2008

Compared with past, helicopters have remarkably high level of safety and accidents due to mechanical defects are decreased about 15%. Most of their duties, however, are to commit at duty area which is hard to access. Because of them, collision probability is high and also has relatively higher accident rates than other aircraft with special mission. A result of analysis is that accident rate is relative high with prevention of disasters, putting out a fire and crop-dusting missions under 500ft. In addition, most of accidents are related with human factors. According to this, it is required to pilots who carry these mission that safety education and detailed analysis about their mission.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.388-396
• /
• 2011

Mission Equipment Package(MEP) system is a collection of avionic components that are integrated to perform the mission of the Korean Utility Helicopter(KUH). MEP system development is classified mission-critical embedded system but KUH MEP system developed including flight-critical data implementation. It is important to establish the good development and verification process for the successful system development. This paper describe the development and verification process in each phase for the KUH MEP system. MEP system design is verified through the qualification test, system failure test and compatibility test in System Integration Laboratory(SIL).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.448-455
• /
• 2014

Virtual Fire Control System(VFCS) in attack helicopter is developed. VFCS is comprised of multifunction display, store management computer, mission computer, target acquisition and designation system, mission planning system, weapon simulator and flight simulator. Weapon engagement process under the operational environment of helicopter was considered by using the VFCS. We considered hellfire missile, tow missile, unguided rocket and turret gun. The results of this study will be utilized efficiently on integrated fire control system SIL(System Integration Lab.) in attack helicopter.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1595-1600
• /
• 2007

It is necessary a simple helicopter design and performance analysis program for a stage of helicopter conceptual design. To meet that needs, we have developed a program which is simply used to estimate helicopter configuration and performance. The program developed by this study is composed of Requirement, Mission profile Analysis, Size, Aerodynamic, Trim, Propulsion, Weight, and Performance modules, and each modules carry out operations for a given flight condition. In this study, we validate this analysis program in 9,500 1bs and 22,000 1bs helicopters and estimate design configuration and performance of 16,000 1b helicopter. And We can use this program to optimization process for Helicopter MDO framework.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.648-653
• /
• 2007

In this study, we have generated fatigue load spectrum that is using to prediction of life time for the helicopter rotor blades. We derive utility helicopter missions for the sake of generating load spectrum. Helix and Felix are standard loading sequences which relate to the main rotors of helicopters with articulated and semi-rigid rotors respectively. We got scale factors which is applied to specific case and it did be obtained through the finite element analysis tools. The fatigue life of the rotor blade is estimated by using MSC/Fatigue. We suggest that generated our fatigue load spectrum in conjunction with small utility helicopter should use to rotor blade fatigue test of the korea helicopter program.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.3
• /
• pp.15-23
• /
• 2007

In this paper, we deducted the missions with respect to Korea utility helicopter (KUH) and consist of the scenarios which describe proper purpose of KUH. And so developed fatigue load spectrum of KUH by applying Helix that is fatigue load spectrum for blade of articulated helicopter rotor system. The developed load spectrum is applied to fatigue analysis of blade by modeled finite element with stress-life method (S-N). And we compared the result of fatigue analysis to prior to Helix for the sake of verifying the load spectrum that we generated.