• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1504-1508
• /
• 1996

In this paper, we derive dynamic equation of helicopter and design controller based on variable structure system. It is difficult to control helicopter because it has non-linear coupling between input and output of system and is MIMO system. The design of control law is considered here using variable structure methodology giving the robustness to parameter variations and invariance to some subsets of external disturbance. However we derive dynamic equations of helicopter and design stabilizing variable structure controller. Also, simulation results are given in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.265-270
• /
• 2005

This paper presents a new attitude stabilization and control of an unmanned helicopter based on neural network compensation. A systematic derivation on the dynamics of an unmanned small-scale helicopter is performed. Combined rotor-fuselage-tail dynamics is derived in body-fixed reference frame with its origin at the C.G. of the helicopter. And the resulting nonlinear equation of motion consists of 6-DOF air vehicle dynamics as well as the rotor flapping and engine torque equations. A simulation model was modified using the existing simulator for an unmanned helicopter dynamic model, which reflects the unmanned test helicopter(CNUHELI). The dynamic response of the refined model was compared with the flight test data. It can be shown that a good coincidence was accomplished between the real unmanned helicopter system and the mathematical model. This dynamic model was linearized for classical controller design using small perturbation method. A Neuro-PD control system was designed for both longitudinal and lateral flight modes, and the results were compared with the PD-only control response. Simulation results show that the proposed Neuro-PD control system demonstrates better performance.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.916-924
• /
• 2008

In this paper dynamic modeling parameters were estimated using a frequency domain estimation method. A systematic flight test method was employed using preprogrammed multistep excitation of the swashplate control input. In addition when one axis is excited, the autopilot is engaged in the other axis, thereby obtaining high-quality flight data. A dynamic model was derived for a small scale unmanned helicopter (CNUHELI-020, developed by Chungnam National University) equipped with a Bell-Hiller stabilizer bar. Six degree of freedom equations of motion were derived using the total forces and moments acting on the small scale helicopter. The dynamics of the main rotor is simplified by the first order tip-path plane, and the aerodynamic effects of fuselage, tail rotor, engine, and horizontal/vertical stabilizer were considered. Trim analysis and linearized model were used as a basic model for the parameter estimation. Doublet and multistep inputs are used to excite dynamic motions of the helicopter. The system and input matrices were estimated in the frequency domain using the equation error method in order to match the data of flight test with those of the dynamic modeling. The dynamic modeling and the flight test show similar time responses, which validates the consequence of analytic modeling and the procedures of parameter estimation.

• 한국항공우주학회지
• /
• 제30권3호
• /
• pp.8-16
• /
• 2002

헬리콥터 비행 시뮬레이션을 위한 로터 운동방정식을 implicit formulation 형태로 유도하였다. 좌표계 사이의 상대운동을 고려한 일반화된 벡터 kinematics 를 유도하고 이를 적용하여 브레이드 임의 위치 에서 관성속도 및 관성가속도를 구하였다. 유도된 속도 및 가속도 벡터를 이용하여 플래핑, 리드래그 및 토오크 방정식 등을 implicit form으로 유도하였다. 브레이드 스팬에 따른 공간 적분 방법을 살펴보고, 다양한 힌지형상 및 힌지배열 순서에 관계없이 응용영역을 확장할 수 있음을 밝혔다. DAE(Differential Algebraic Equation) 형태를 갖는 본 연구의 결과식을 이용하여 동특성 계산을 위한 시간적분법을 검토하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.19-19
• /
• 2009

Dynamic Stall is a flow phenomenon which occurs on the retreating side of helicopter rotor blades during forward flight. It also occurs on blades of stall regulated wind turbines under yawing conditions as well as during gust loads. Time scales occurring during this process are comparable on both helicopter and wind turbine blades. Dynamic Stall limits the speed of the helicopter and its manoeuvrability and limits the amount of power production of wind turbines. Extensive numerical as well as experimental investigations have been carried out recently to get detailed insight into the very complex flow structures of the Dynamic Stall process. Numerical codes have to be based on the full equations, i.e. the Navier-Stokes equations to cover the scope of the problems involved: Time dependent flow, unsteady flow separation, vortex development and shedding, compressibility effects, turbulence, transition and 3D-effects, etc. have to be taken into account. In addition to the numerical treatment of the Dynamic Stall problem suitable wind tunnel experiments are inevitable. Comparisons of experimental data with calculated results show us the state of the art and validity of the CFD-codes and the necessity to further improve calculation procedures. In the present paper the phenomenon of Dynamic Stall will be discussed first. This discussion is followed by comparisons of some recently obtained experimental and numerical results for an oscillating helicopter airfoil under Dynamic Stall conditions. From the knowledge base of the Dynamic Stall Problems, the next step can be envisaged: to control Dynamic Stall. The present discussion will address two different Dynamic Stall control methodologies: the Nose-Droop concept and the application of Leading Edge Vortex Generators (LEVoG's) as examples of active and passive control devices. It will be shown that experimental results are available but CFD-data are only of limited comparison. A lot of future work has to be done in CFD-code development to fill this gap. Here mainly 3D-effects as well as improvements of both turbulence and transition modelling are of major concern.

• 한국군사과학기술학회지
• /
• 제11권5호
• /
• pp.12-22
• /
• 2008

In this study, the dynamic characteristics for the wheel-type landing gear system of helicopter have been analyzed. Nonlinear multi-body dynamic models of the landing gear system are constructed and the equations of motion, kinematics and internal forces of shock strut are considered. In addition, flexibility effect of the wheel axle with equivalent beam element is taken into account. General purpose commercial finite code, SAMCEF which includes MECANO module is applied. The results of dynamic simulation for various landing and weight conditions are presented and compared with each other. Based on the results, characteristics of impact dynamic behaviors of the landing gear system are practically investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.818-821
• /
• 1999

Helicopter system is regarded as a challenging example in multivariable robust control application since the dynamics of helicopter is highly coupled and nonlinear. In this paper, Dynamic equations for model helicopter at hover are derived. Various system properties are stated with respect to control of the attitude of the vehicle. A linearized model is used to analyse the system stability and to design the attitude controller. The simulation results of LQG controller are presented.

• 한국항공우주학회지
• /
• 제36권12호
• /
• pp.1152-1162
• /
• 2008

본 논문은 헬리콥터 비선형 제어기 설계를 위한 State-Dependent Riccati Equation (SDRE) 기법을 다루었다. SDRE 제어기법은 비선형 운동방정식에 대해 선형 시스템과 같은 구조를 갖는 방정식을 필요하기 때문에 State-Dependent Coefficient (SDC) factorization 기법을 개발하여 비선형 운동방정식으로부터 이러한 구조의 방정식을 유도하였다. SDRE제어기를 온라인상에서 설계하는데 필요한 대수 Riccati 방정식의 효율적인 수치해법을 연구하였다. 본 연구에서 제안된 수치기법을 헬리콥터의 경로추종문제로 적용하였으며, 고 신뢰도의 헬리콥터 수학적 모델을 적용하여 실시간으로 SDRE 제어기를 설계할 수 있는 방안을 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1949-1951
• /
• 2001

This paper deals with the control of a nonlinear experimental helicopter system by using the fuzzy-model-based control approach. The fuzzy model of the experimental helicopter system is constructed from the original nonlinear dynamic equations in the form of an affine Takagi-Sugeno (TS) fuzzy system. In order to design a feasible switching-type fuzzy-model-based controller, the TS fuzzy system is converted to a set of uncertain linear systems, which is used as a basic framework to synthesize the fuzzy-model-based controller.

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.42-48
• /
• 2003

Lever II 헬리콥터 비행운동 방정식으로부터 주기성 트림해를 구하기 위해 DAE 해법에 근거한 PPTA(Partial Periodic Trimming Algorithm)를 제안하였다. PPTA의 반복계산으로 수정된 상태변수는 적합한 초기조건이 요구되는 DAE해법에서 수치불안정을 일으킬 수 있다. 간단하게 DAE 차수를 조절함으로써 정확한 주기성 트림을 얻을 수 있었다. 수치해법을 CBM(Common Baseline Model) 헬리콥터에 적용하여 harmonic balance 방법과 동일한 트림해를 얻었으며 시뮬레이션 초기의 과도응답을 효과적으로 제거할 수 있음을 밝혔다.