• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2019

In electric agricultural machine the gearbox is used to increase torque and lower the output speed of the motor shaft. The gearbox consists of several shafts, helical gears and spur gears works in series. Optimization plays an important role in gear design as reducing the weight or volume of a gear set will increase its service life and improve the bearing capacity. In this paper the basic design parameters for gear like shaft diameter and face width are considered as the input variables. The bending stress and material volume is considered as the objective function. ANSYS was used to investigate the bending stress when the variable was changed. Artificial Neural Network (ANN) was used to obtain the mathematical model of the system based on the bending stress behaviour. The ANN was used since the output system is nonlinear. The Genetic Algorithm (GA)　technique of optimization is used to obtain the optimized values of shaft diameter and face width on the pinion based on the ANN mathematical model and the results are compared as that obtained using the traditional method. The ANN and GA were performed using MATLAB. The simulation results were shown that the proposed algorithm was successfully calculated the value of shaft diameter and face width to obtain the minimal bending stress and material volume of the gearbox.

• Steel and Composite Structures
• /
• v.44 no.2
• /
• pp.199-210
• /
• 2022

This study build finite element analysis (FEA) models describing the bending events of coiled tubing (CT) at the wellhead and trips into the hole, accurately provide the state of stress and strain while the CT is in service. The bending moment and axial force history curves are used as loads and boundary conditions in the diametrical growth models to ensure consistency with the actual working conditions in field operations. The simulation diametrical growth results in this study are more accurate and reasonable. Analysis the factors influencing fatigue and diametrical growth shows that the internal pressure has a first-order influence on fatigue, followed by the radius of the guide arch, reel and the CT diameter. As the number of trip cycles increase, fatigue damage, residual stress and strain cumulatively increase, until CT failure occurs. Significant residual stresses remain in the CT cross-section, and the CT exhibits a residual curvature, the initial residual bending configuration of CT under wellbore constraints, after running into the hole, is sinusoidal. The residual stresses and residual bending configuration significantly decrease the buckling load, making the buckling and buckling release of CT in the downhole an elastic-plastic process, exacerbating the helical lockup. The conclusions drawn in this study will improve CT models and contribute to the operational and economic success of CT services.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.305-318
• /
• 2023

This study investigated the protein digestibility of chicken breast and thigh in an in vitro digestion model to determine the better protein sources for the elderly in terms of bioavailability. For this purpose, the biochemical traits of raw muscles and the structural properties of myofibrillar proteins were monitored. The thigh had higher pH, 10% trichloroacetic acid-soluble α-amino groups, and protein carbonyl content than the breast (p<0.05). In the proximate composition, the thigh had higher crude fat and lower crude protein content than the breast (p<0.05). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of myofibrillar proteins showed noticeable differences in the band intensities of tropomyosin α-chain and myosin light chain-3 between the thigh and breast. The intrinsic tryptophan fluorescence intensity of myosin was lower in the thigh than in the breast (p<0.05). Moreover, circular dichroism spectroscopy of myosin revealed that the thigh had higher α-helical and lower β-sheet structures than the breast (p<0.05). The cooked muscles were then chopped and digested in the elderly digestion model. The thigh had more α-amino groups than the breast after both gastric and gastrointestinal digestion (p<0.05). SDS-PAGE analysis of the gastric digesta showed that more bands remained in the digesta of the breast than that of the thigh. The content of proteins less than 3 kDa in the gastrointestinal digesta was also higher in the thigh than in the breast (p<0.05). These results reveal that chicken thigh with higher in vitro protein digestibility is a more appropriate protein source for the elderly than chicken breast.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.213-213
• /
• 2023

하천의 합류부는 두 하천이 만나 형성되는 지역으로 복잡한 혼합 거동을 보인다. 합류부에서는 실제로 수리 특성이 유황에 따라 다양하게 변화하고 수환경 특성도 함께 변화하며, 이로 인해 본류와 지류에 비해 다양한 생태학적인 종이 분포하는 등 환경적으로 중요구간 중 하나이다. 합류부의 혼합 거동을 이해하기 위해서는 다양한 유황에 따른 수체 혼합 거동을 2차류를 통해 분석하는 것이 중요하다. 해외의 경우 2차류의 패턴을 통해 합류부에서의 혼합 거동을 공간적으로 분석한바 있으나(Riley and Rhoads, 2012), 대부분의 연구들은 중·소규모의 하천을 대상으로 진행되어 대규모 하천에서의 확인은 미흡한 상태이다. 또한, 실제 현장에서 계측을 통한 데이터 획득과 후 처리의 어려움으로 인해 현재 국내에서는 2차류 패턴을 통해 대규모 하천 합류부의 혼합 거동을 확인한 사례는 전무한 실정이다. 따라서, 본 연구에서는 Sontek사의 ADCP를 통해 계측된 수리 데이터를 Rozovskii의 방법을 기반으로 한 2차류로 나타내 낙동강-금호강 합류부에서의 공간적인 수체 혼합을 확인하였다. 혼합거리를 판단하기 위해 합류 이후 혼합의 경계면(Shear Layer)에서 나타나는 2차류의 특이한 패턴(Helical motion)을 주요 지표(Index)로 사용하였다. 그리고, 수질 센서인 YSI EXO2의 수표면 전기전도도의 분포를 통해 합류부에서 본류와 지류의 혼합거리를 산정하였으며, 2차류의 패턴과 비교하였다. 분석 결과, 대규모 하천에서 2차류의 특이한 패턴이 존재함을 명확히 확인하였다. 본류와 지류의 모멘텀 비에 따라 서로 다른 패턴의 혼합양상을 2차류를 통해 확인할 수 있었으며, 2차류의 혼합 패턴과 전기전도도의 분포를 비교 분석하여 합류부에서의 혼합을 3차원적으로 해석하였다.

• Nuclear Engineering and Technology
• /
• v.20 no.3
• /
• pp.170-178
• /
• 1988

An automated ultrasonic flaw detection system was developed for thin-walled and short tubes such as Zircaloy-4 tubes used for cladding heavy-water reactor fuel. The system was based on the two channels immersion pulse-echo technique using 14 MHz shear wave and the specially developed helical scanning technique, in which the tube to be tested is only rotated and the small water tank with spherical focus ultrasonic transducers is translated along the tube length. The optimum angle of incidence of ultrasonic beam was 26 degrees, at which the inside and outside surface defects with the same size and direction could be detected with the same sensitivity. The maximum permissible defects in the Zircaloy-4 tubes, i.e., the longitudinal and circumferential v notches with the length of 0.76mm and 0.38mm, respectively and the depth of 0.04 mm on the inside and outside surface, could be easily detected by the system with the inspection speed of about 1 m/min and the very excellent reproducibility. The ratio of signal to noise was greater than 20 dB for the longitudinal defects and 12 dB for the circumferential defects.

• Composites Research
• /
• v.19 no.4
• /
• pp.31-38
• /
• 2006

In this study, effects of curing temperature and autofrettage pressure on a Type 3 cryogenic propellant tank, which is composed of composite hoop/helical layers and a metal liner, were investigated by thermo elastic analysis and composite/aluminum ring specimen tests. Temperature field of a Type 3 tank was obtained from solving the heat transfer problem and, in turn, was used as nodal temperature boundary conditions during the elastic analyses for curing temperature and autofrettage pressure effects. As a result, it was shown that the higher curing temperature was, the more residual compressive stress and tensile stress were induced in composites and metal liner, respectively. On the contrary, autofrettage pressure brought the reduction of these residual thermal stresses caused by cryogenic environments to the tank structure. This tradeoff for curing temperature and autofrettage pressure must be considered in the design and manufacturing stages for a Type 3 cryogenic tank.

• Korean Journal of Exercise Nutrition
• /
• v.16 no.2
• /
• pp.93-100
• /
• 2012

Alzheimer's disease (AD) is the most common cause of dementia in adults. Microtubule associated protein tau is abnormally phosphorylated in AD and aggregates as paired helical filaments (PHFs) in neurofibrillary tangles (NFTs). NFTs are the most common intraneuronal inclusion in the brains of patients with AD and have been implicated in mediating neuronal cell death and cognitive deficit. Aberrant phosphorylation of tau is an early pathological event in AD, but the underlying mechanisms are unclear. MAP kinases are a family of Serine/Threonine (Ser/Thr) kinases that involved hyper - phosphorylation of tau in AD. The purpose of this study was to investigate the effect of treadmill exercise on phosphorylation of tau level and activation of MAPKs including JNK, ERK, p38-MAPK. To address this, Tg mouse model of AD, Tg-NSE/hTau 23, which expresses human tau 23 in the brain, was chosen. Animals were subjected to treadmill exercise for 12 weeks from 24 months of age. Treadmill exercise in Tg group improved cognitive function compared with Tg-SED group in watermaze test. In addition, treadmill exercised Tg mice significantly reduced the activation of JNK54/46, p38-MAPK and tau (Ser404, Ser202, Thr231), and increased activation of ERK44/42 in cerebral cortex. These results suggest that treadmill exercise may provide a therapeutic potential to alleviate the tau pathology like AD.

• Korean Journal of Radiology
• /
• v.1 no.1
• /
• pp.38-42
• /
• 2000

Objective: The purpose of this study was to determine the utility of preoperative CT in predicting early recurrence of hepatocellular carcinoma after partial hepatic resection. Materials and Methods: Preoperative three-phase helical CT scans in 53 patients with hepatocellular carcinoma were retrospectively reviewed by two radiologists. In 27 patients (group I), HCC had recurred within six months, while 26 (group II) had remained disease free for at least two years. In each group, preoperative CT findings were evaluated in each group for the tumor size and number, the presence or absence of capsule, distinctness of tumor margin, perinodular extension, and the presence or absence of portal vein thrombosis. Results: In group I, a tumor capsule of tumor was seen in five of 27 patients (19%), and in group II, in 16 of 26 (62%) (p = .001). The tumor margin was distinct in eight patients (30%) in group I and in 20 (77%) in group II (p = .001). Multiple tumors, perinodular extension, and portal vein thrombosis were more frequently seen in group I but the differences were not statistically significant (p > .05). Tumor size was similar in each group (p > .05). Conclusion: Preoperative CT findings that may help predict the early recurrence of hepatocellular carcinoma after surgical resection are an absence of capsule of tumors and an indistinct margin. Reference to these findings during preoperative CT can guide clinicians in their choice of treatment.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4570-4575
• /
• 2023

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.147-158
• /
• 2008

In this study, fermentation characteristics of waste agricultural and forest biomass for production of heat energy were focused to be used in agricultural farm households. The purpose of this study was focused on seeking practical utilization of agricultural and forest biomass wastes in agricultural farm households in the form of thermal energy by means of simple fermentation process. Fermentation process was performed in terms of different raw-materials and their mixture with different ratios. Urea, lime, and bioaids were added as fermenting aids. Moisture contents of fermenting substrates were adjusted to 55~65%. In order to optimize the fermentation process various factors, such as raw-materials, moisture contents, amount of fermenting aids, and practical measurement of hot-water temperature during fermentation were carefully investigated. The optimum condition of fermenting process were obtained from hardwood only and hardwood: softwood (50 : 50) beds. In case of hardwood only the highest temperature was recorded between 60 to $90^{\circ}C$ the lowest temperature was determined to more or less $40^{\circ}C$ and the average temperature was ranged to $50{\sim}60^{\circ}C$ and this temperature ranges were maintained up to 20~30 days. The optimum amount of additives were estimated to ca. 15 kg of urea, 20 kg of bioaids, and 10 kg of lime for 1 ton of substrate. To reach the highest temperature the optimum moisture content of fermenting substrate was proved to 55% among three moisture content treatments of 45%, 55% and 65%. The temperature of hot-water tank installed in fermenting bed of hardwood : grass (50 : 50) showed very different patterns according to measuring positions. In general, temperatures in the mid- and upper-parts of substrate piling were relative higher than lower and surface parts during 45-day fermentation process. The maximum temperature of fermenting stage was determined to $65^{\circ}C$, minimum temperature, more or less $40^{\circ}C$, and average temperature was $60^{\circ}C$. The water temperature of tank exit was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. It could be concluded that fermentation process of waste agricultural and forest biomass produces a considerable amounts of heat, averaging about $50{\sim}60^{\circ}C$ for maximum 3 months by using the heat exchanger (HX-helical type).