• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.245-254
• /
• 2006

Long term wave climate of both extreme wave and operational wave height is essential for planning and designing coastal structures. Since the field wave data for the waters around Korean peninsula is not enough to provide reliable wave statistics, the wave climate information has been generated by means of long-term wave hindcasting using available meteorological data. Basic data base of hindcasted wave parameters such as significant wave height, peak period and direction has been established continuously for the period of 25 years starting from 1979 and for major 106 typhoons for the past 53 years since 1951 for each grid point of the North East Asia Regional Seas with grid size of 18 km. Wind field reanalyzed by European Center for Midrange Weather Forecasts (ECMWF) was used for the simulation of waves for the extra-tropical storms, while wind field calculated by typhoon wind model with typhoon parameters carefully analyzed using most of the available data was used for the simulation of typhoon waves. Design wave heights for the return period of 10, 20, 30, 50 and 100 years for 16 directions at each grid point have been estimated by means of extreme wave analysis using the wave simulation data. As in conventional methodsi of design criteria estimation, it is assumed that the climate is stationary and the statistics and extreme analysis using the long-term hindcasting data are used in the statistical prediction for the future. The method of extreme statistical analysis in handling the extreme vents like typhoon Maemi in 2003 was evaluated for more stable results of design wave height estimation for the return periods of 30-50 years for the cost effective construction of coastal structures.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2009

The present study is to estimate the effect of wave height affecting at the front face of breakwater systems, when a submarine trench is dredged in the distant offshore from outer breakwater. The wave diffraction field, which is important hydraulic factor in the ocean, is considered to be two dimensional(2D) plane and the configuration of the submarine trench on the sea bed designated by single horizontal long-rectangular system. The numerical simulation is performed by using Green function based on the boundary integral equation and meshed at moving boundary conditions. The results of present numerical simulations are illustrated by applying the normal incidence. It is shown that the ratios of wave height reduction at the front face of breakwater systems are approximately 20% by the effect of placing long trench on the sea bed. This study can effectively be utilized for safety assessment to various breakwater systems in the ocean field.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.29-35
• /
• 2013

Generally, Calculation of carbon dioxide absorption in the forest area is calculated using the information of the forest, such as tree height and DBH(Diameter of Breast Height). Tree height and DBH of these are obtained using the remote sensing data such as imagery and information of local forest survey. However, Mixed forest with a high proportion of field survey to lower the accuracy of forest information. In this study, vertical structure of the tree were identified by applying region growing method based on the slope using LiDAR data and height and number of the tree were identified by applying extracting top of the tree algorithm. Through the vertex tree extraction algorithm to identify height of tree and the number of individuals, substitute this for the DBH relation formula which is drawn from data through field surveys. In this, a quantitative calculation of carbon dioxide absorption were able to calculate the basic data. Also, carbon dioxide absorption of three type trees were calculated and average per unit area of carbon dioxide absorption were able to estimate.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.187-196
• /
• 2017

The use of unmanned aerial vehicles (UAV) for the estimation of tree height is gaining recognition. This study aims to assess the effectiveness of tree height estimation of Pinus densiflora Sieb. et Zucc. and Pinus koraiensis Sieb. et Zucc. using digital surface model (DSM) generated from UAV-acquired imageries. Images were taken with the $Trimble^{(R)}$ UX5 equipped with Sony ${\alpha}5100$. The generated DSM, together with the digital elevation model (DEM) generated from a digital map of the study areas, were used in the estimation of tree height. Field measurements were conducted in order to generate a regression model and carry out accuracy assessment. The obtained coefficients of determination (R2) and root mean square error (RMSE) for P. densiflora (R2=0.71; RMSE=1.00 m) and P. koraiensis (R2=0.64; RMSE=0.85 m) are comparable to the results of similar studies. The results of the paired two-tailed t-test show that the two tree height estimation methods are not significantly different (p-value=0.04 and 0.10, alpha level=0.01), which means that tree height estimation using UAV imagery could be used as an alternative to field measurement.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.468-474
• /
• 2011

The flow field around baffle located sudden expansion and contraction channel was measured by PIV method and the effect according to height change of baffle built in the flow field was evaluated. The inlet flow velocity and the baffle height influence mutually to the size and flow pattern of the recycle flow of the back of the baffle and the size of the area of the water power jump passing the upper part of the baffle. In case of Reynolds number $Re=4{\times}10^3$, the critical value of baffle height is estimated around h/H=1.6 and there was a decreasing tendency as the inlet flow velocity was increased.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.31-40
• /
• 2007

Reverse engineering of reliefs aims to turn an existing relief superimposed on an underlying surface into a geometric model which may be applied to a different base surface. Steps in this process include segmenting the relief from the background, and describing it as an offset height field relative to the underlying surface. We have previously considered relief segmentation using a geometric snake. Here, we show how to use this initial segmentation to estimate the background surface lying under the relief, which can be used (i) to refine the segmentation and (ii) to express the relief as an offset field. Our approach fits a B-spline surface patch to the measured background data surrounding the relief, while tension terms ensure this background surface smoothly continues underneath the relief where there are no measured background data points to fit. After making an initial estimate of relief offset height everywhere within the patch, we use a support vector machine to refine the segmentation. Tests demonstrate that this approach can accurately model the background surface where it underlies the relief, providing more accurate segmentation, as well as relief height field estimation. In particular, this approach provides significant improvements for relief concavities with narrow mouths and can segment reliefs with small internal holes.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.3
• /
• pp.43-49
• /
• 2008

The pump control valve is a butterfly valve that has an eccentric rotating axis. It is not only used as a butterfly valve to control the flow rate or pressure, but also as a check valve to prevent backward flow. A new design method of eccentric rotating axis is proposed to design the valve. The height of the rotating axis is determined through flow field analysis. A general purpose of computational fluid dynamics software system, Fluent is used to simulate the fluid flow. Flow field analysis is performed for various heights of the rotating axis and different opening angles of the valve. A characteristic function is defined for estimating the flow characteristics based on the results of flow field analysis. The characteristic function is defined in order to determine the height of the rotating axis. An optimization problem with a characteristic function is formulated to determine the amount of eccentricity. The height of the Totaling axis of the valve is determined through solving the optimization problem.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.97-103
• /
• 2007

The present study aims to document the run-up height, losses of human lives and property damage due to the tsunami occurred on December 26, 2004 in Andaman and Nicobar Islands, India. These Islands were severely devastated by the tsunami. Approximately 1,925 people were lost their lives and 5,555 people were reported missing. A field survey conducted at 26 sites indicates that the run-up height reached its maxima of 17.3 m at the passenger jetty of Little Andaman area and the Chdiyatopu area was inundated 500 m from the coastline.

• Journal of Environmental Science International
• /
• v.32 no.3
• /
• pp.161-171
• /
• 2023

The present study evaluated growth factors affecting oak community plantations through literature review and a field survey. Specifically, 41 related literature sources were analyzed and field surveys were conducted to collect growth data. Previous studies were analyzed to identify variables with high frequency of use. The frequency of use was in the order of tree size > environment > planting density > forest age. Analysis of factors impacting height and diameter growth revealed that the growth rate of species other than Quercus variabilis was negative in the field survey. This may be because of differences between the actual trees planted and specifications in the construction drawings, which may be attributed to the site conditions and decisions made by the project subject during construction. Furthermore, simple linear regression analysis was conducted with time, height at planting, density, and species code as the independent variables and growth rate as the dependent variable. A strong positive linear correlation was noted between height and diameter. This work builds a foundation for developing a forest restoration model and simulation program based on a regression model derived from the four variables tested.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.1-6
• /
• 2018

The purpose of this study is to provide baseline data on lung field size measured radiological method by chest PA image in normal Korean. The subject of this study is 496 normal persons who performed chest PA examination using x-ray digital radiography system. The measurement method is from the apex of right and left lung to the costophrenic angle of both lung, from the top of the image to the lowest costophrenic angle of both lung and transverse line of the largest lung area. As a result of this study, the following conclusions were obtained. A lung field size of male is larger than the female(p<0.05). The younger the age, the longer both lung length and total lung height statistically significant. As a increase height and length, A lung field size was increased(p<0.05). But, BMI is not associated with a lung field size. This study will be data of reference data when radiological technologists perform chest PA examination.