• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.14-18
• /
• 2016

Organic compounds have a problem that the separation of structural isomer in the preparation process requires high energy consumption. This study proposes a new separation method of structural isomer using Magneto- Archimedes method. Firstly, the levitation height of 1, 6-DDA and 1, 10-DDA was respectively calculated by simulation of the forces acting on the particles under magnetic field, and it was indicated that they could be separated by the difference of levitation height. To confirm the phenomenon experimentally, white powders of 1, 6-DDA and 1, 10-DDA were formed into pellets, and were soaked in manganese chloride solution. Then the solution was put on the center of the cryostat of HTS bulk magnet (maximum magnetic flux density is 3T). As a result, it was confirmed that the separation of structural isomer by difference of levitation height could be possible.

• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.145-152
• /
• 2004

Effects of various baffle designs on acoustic characteristics in combustion chamber are numerically investigated by adopting linear acoustic analysis. A hub-blade configuration with five blades is selected as a candidate baffle and five variants of baffles with various specifications are designed depending on baffle height and hub position. As damping parameters, natural-frequency shift and damping factor are considered and the damping capacity of various baffle designs is evaluated. Increase in baffle height results in more damping capacity and the hub position affects appreciably the damping of the first radial resonant mode. Depending on baffle height, two close resonant modes could be overlapped and thereby the damping factor for one resonant mode is increased exceedingly. The present procedure based on acoustic analysis is expected to be a useful tool to predict acoustic field in combustion chamber and to design the passive control devices such as baffle and acoustic resonator.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.31-36
• /
• 1998

By using wind vectors observed by NSCAT and significant wave heights observed by TOPEX/POSEIDON and ERS-2 altimeters, one-dimensional fetch growth of wind waves Is investigated under conditions of strong wind and high waves of the East Asian winter monsoon. The evolution of fetch-limited wind waves can be observed by the altimeters along the ground tracks. The fetch is estimated by using vector wind field observed by NSCAT. The derived growth characteristics of wind waves are compared with empirical relationships between the non-dimensional fetch and significant wave height proposed by previous studies. Good agreement with the empirical fetch graph formula normalized by the friction velocity is discemible, while the formulas normalized by the wind speed at a height of 10 m tend to underestimate the wave height under such severe conditions of high wind and very long fetch.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.58-62
• /
• 2001

A numerical investigation was performed to determine the effect of airfoil on the optimum flap. height using NACA 0006, 0009, 0012, 0015, 0018, 0021 and 0024 airfoils. The six flaps which have 0.5% chord height difference were used. A Navier-Stokes code, FLUENT, was used to calculate the flow field of the airfoil. The code was first tested as a benchmark by modelling flow around a NACA 4412 airfoil. Predictions of local pressure coefficients are found to be in good agreement with the result of the experimental result. For every NACA 00XX airfoil, flap heights ranging from 0.0% to 2.5% chord were changed by 0.5% chord interval and their effects were also studied. Representative results from each case are presented graphically and discussed. It is concluded that this initial approach gives a promise for the future development of wind turbine optimum design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.2
• /
• pp.151-157
• /
• 2002

A 3-dimenstional automatic solder paste inspection system is described that can be used to find defects occurring in solder paste printing process. This system extracts height and volume information very fast as well as area of solder paste printed, using multiple slit ray projection and Galvano-mirror scanning. Methods are presented on calibration of camera and slit projector, real-time image processing of multiple slit images, determination of reference height, and extraction of paste height information are proposed. Performance of the system was successfully demonstrated through field tests.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.26-34
• /
• 2006

In this paper, We proposed he algorithm for defect extraction and a study of the stereo image modeling o inspect defect for the ball height of BGA(ball grid way) device using 2-dimensional images captured by the BGA device of using the high resolution CCD cameras. This paper propose the package/ball area extraction of BGA device part, the FOV(field of view) calibration part, the top point matching part, and ball height measurement method. Each BGA device propose extraction method by defect, Through the experiment, we verified the result.

• Plant Resources
• /
• v.7 no.1
• /
• pp.15-21
• /
• 2004

This study was conducted to evaluate the effect of mecoprop-wp concentrations on weed control, growth characters and yield in flax, after 7cm and 14cm of plant height it to the field. The major weeds were Alopecurus aequalis var. a murensis (kom) ohwi, Persicaria hydropiper spach, Lamium amplexicaule L, Stellaria alsine Grimm var. undulata ohwi, Eleusine indica(L.) Gaertn. Flax yield were increased somewhat more with 250g/10a mecoprop-wp at 7cm of plant height than the other treatment and by hand weeding treatment of mecoprop-wp, 250g/10a at 7cm of plant height was slightly harmful for the flax with recommended concentration, On the other hand, all treatments were harmful in the double dosage level.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.141-150
• /
• 2000

In order to genralize the vertical dispersion of plume at long distances on mesoscale over complex terrain dispersion coefficients data have been obtained systematically according to lapsed time after release by using a composite turbulence water tank that simulates convective boundary layer. Dispersion experiments have been carried out for various combined conditions of thermal turbulence intensity mechanical turbulence intensity and plume release height at slightly to moderately unstable conditions. Results of tracer dispersion experiments conducted using water tank camera and image processing system have been converted into atmospheric dispersion data through the application of similarity law. The equation $\sigma$z/Zi=aX/(b+c X2)0.5 where $\sigma$2; vertical dispersion coefficient zi : mixing height X : dimen-sionaless downwind distance was confirmed to be an appropriate and general equation for expressing $\sigma$2 variation with turbulence intensity and plume release height, The value of "a" was found to be principally affected by mechanical turbulence intensity and that of "b" by mechanical turbulence intensity and release height. It was confirmed that the magnitude of "c" varies with release height. Results of water tank experiments on the relationship of $\sigma$2 vs downwind distance x have been compared with actual atmospheric dispersion data such as CONDORS data and Bowne's nomogram Operating conditions of a composite turbulence water tank for simulating the field turbulence situations of CONDORS experiments and Bowne's $\sigma$2(x) nomogram for suburban area have also been investigated in terms of water temperature difference between convection water tank and bottom plate heating tank grid plate stroke mixing water depth length scale and velocity scale. Moreover the effect of mechanical turbulence intensity on vertical dispersion has been discussed in the light of release height and downwind distance. height and downwind distance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.53-60
• /
• 1996

A field experiment was carried out to determine the effects of grazing stage and intensity on the forage production and nutritive value in orchardgrass dominant pasture, 1989 and 1990. The grazing stages were 20- 25m, 30-35cm and 40-45cm of plant height, and high and medium grazing intensity were set by the number of growing cows (initial body weight: 230-250kg), which was adJusted according to the pasture production. The high level of grazing intensity was 150% of medium intensity. Annual grazing frequency was 10 times in 20-25cm. 8 times in 30-35cm. and 6 times in 40-45cm of plant height. Dry matter(DM) yield was increased with increasing of plant height at grazing : 7,090kg in 20-25cm 7,882kg in 30-35n and 8,260 kgha in 40-45cm of height. Higher DM was observed at medium grazing intensity. In spring, daily DM production was more vigorous than those in summer and autumn season. Cmde protein (CP), digestible DM, and DM intake were decreased with increasing of plant height at grazing. CP content was 25.8% in 20-25cm 22.4% in 30-35m and 19.2% in 40-45cm, while the contents of neutral detergent fiber and acid detergent fiber were increased with higher plant height. Relative feed value was 11 1.2 in 20-25cm, 104.4 in 30-35n and 99.6 in 40-45cm. Also nutritive value of pre-grazing pasture plants was remarkably higher than that of post-grazing, and not significant differences of nutritive value were found between grazing intensity. From the above mults, it may be concluded that optimum plant height for grazing was 20-25cm and 30- 35cm in pasture mixtures dominated by orchardgms, and medium grazing intensity was very desirable for pasture productivity.

• Journal of Plant Biology
• /
• v.15 no.4
• /
• pp.1-12
• /
• 1972

To study on the annual height growth of Pinus densiflora within natural pine stands in central Korea, twenty two pure closed Pinus densiflora stands were selected subjectively in the west-central region of Korea. In each stand twenty trees were chosen randomly. For each tree, abotu ten to fifteen measurements of internodal lengths were made from leader top to trunk base. A total of one hundred thirty four soil samples was collected. Each soil sample was bulked with three subsamples. The ranges of the growth measurements per stand, per tree and per observation were 14.9-35.4cm, 9.0cm-54.4cm and 2.4cm-69.0cm respectively. The total mean value was 23.5cm. The Student-Newman-Keul's tests for the multiple comparison among the mean values of the height growth per stand were very highly significant. The resutls of the analysis of variance of the height growth data for the selected fifteen stands among the twenty two stands indicate that sampling efficiency might be increased to 744% if measurement of the growth were made on fifteen trees per stand from twenty stands instead of twenty trees per stand from fifteen stands. The annual height growths of Pinus densiflora and Pinus koraiensis for the period from 1960 to 1968 were 21.74$\pm$5.29cm (10) and 20.56$\pm$5.59cm (10) respectively. The total means of easily-soluble phosphorus, total nitrogen, loss on ignition and pH for the soil samples were 2.8 ppm, 0.09%, 5.4% and 4.7 respectively. The ranges of those amounts were 18.7-1.7ppm, 0.17-0.05%, 11.6%-3.1%, 3.9-5.1 respectively. The relationship of the annual height growth of P. densiflora to soil was studied in terms of standard partial multiple regression. Among soil properties such as non-capillary pore space, capillary pore space, maximum field capacity, loss on ignition, soil reaction, total nitrogen and easily-soluble phosphoros investigated, the easily soluble phosphorus in one analysis and loss on ignition and soil reaction in the other analysis seem to have significant positive influence on the annual height growth.