• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.78-85
• /
• 1987

In order for Paldanghomil (winter rye) to be investigated if its grain yield is able to be produced after clipping just before winter season for forage utilization this experiment was carried out under the four sowing dates of four locations in Korea (Chunchon, Suwon, Hwasung and Chungju). In rye clipping plot earlier sowing showed taller plant height, more number of tillers/㎡ and higher forage yield before winter season, indicating the highest forage yield (1803 kg/10a) in Chunchon by sowing of September II. Forage yield of rye before winter season was mainly influenced by plant height and number of tillers/㎡, showing more effect of plant height. Rye plants were more or less affected on winter damages, late heading and short culm by clipping before winter season. Analysis of variance indicated that only number of spikes/㎡ among grain yield components showed the high significance according to the clipping method, and that there showed little variation for other yield components due to the sowing date and clipping method. There showed more grain yield in non-clipping rather than that of clipping plot, indicating the difference of 46kg/10a. This was resulted from short culm and severe winter damages caused by clipping before winter season. Of the grain yield components, number of spikes/㎡ was greatly influenced for grain yield by analysis of stepwise regression. Therefore, grain yield of rye was able to produce after forage utilization before winter season due to the appropriate crop and soil managements, by resulting from the little variation in grain yield between clipping or non-clipping plots and from the higher grain yield by the early sowing.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.24-25
• /
• 1965

A statistical study was made on the size of sample plot to be used in the preparation of a yield table. This has always been an important problem needing solution in Korea. For this purpose, 3 replications of Korean white pine plantings with block size of $80m{\times}80m$ were established in the Kwangneung Experimental Forest. A location map was prepared of the pines in the blocks and the heights and the breast height diameters measured. Then those blocks were divided into 64, 64, 16, 16, 4, 4, and 1 standed $40m{\times}80m$ and $80m{\times}80m$ each. After these divisions, the average heights, average breast height diameters, standard deviations and coefficient of variations were computed for the plots and averaged according to plot size. As the results of these computations, it was shown that the standard deviation and the coefficient of variation suddenly increased with the beginning of an increase in plot size. However, these indicated an approximately constant value at a certain limit. Although the average value decreases with the initial increase in plot size, it also indicates an approximately constant value at a certain limit. This limit was between $20m{\times}40m$ and $40m{\times}40m$. With the purpose of evaluating these facts, the average height and the average diameter were computed for the number of standing trees in the $10m{\times}10m$ plots. A negative (minus) relationship was found between the number of standing trees and the average value. As a result of above evaluation, it was found that when the size of plot area was small, a larger estimated value, was obtained as well as a smaller standard deviation and coefficient of variation. It is possible, therefore, that an incorrect value might be used in the evalution of data as the stand structure could appear to be uniform when the plot size was small. In general, when the size of plot area is larger than $40m{\times}40m$, the probability of the difficulty occurring mentioned above is estimated to be small.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.519-531
• /
• 2006

Sea surface height (SSH) around fe Korean Peninsula was investigated as a rising rate of $3.89mm\;yr^{-1}$ on the average from 1993 to 2005, which is 1.3 times higher rising rate, compared to the world ocean. In the present study, to investigate SSH changes in regional sections of the East Sea, the Yellow Sea, the South Sea, and the Korea Strait, DT-MSLA (Delayed Time-Maps of Sea Level Anomalies) with multi-satellite data (Topex/Poseidon, Jason-1, ERS, Envisat), provided by AVISO (Archiving, Validation and Interpretation of Satellite Oceanographic data), was used. The periodicity in interannual variability was dominant for $4\sim5$ year in summer, and 3 year in winter as well as an increasing trend. The amplitude and phase for the annual and semi-annual mode in SSH and SST were investigated with harmonic analysis. The geographical distribution of amplitudes for comparison of SSH and SST are slightly reverse in southwest-northeast tilted direction. The monthly SST and SSH is highly correlated correlation coefficient about 0.7 with lag of one or two months over the East Sea and the South Sea during June-August. These results suggest that the Kuroshio stream is dominant during summer over these regions.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.189-195
• /
• 1996

In order to obtain basic information for breeding varieties of onion which is suitable at the southern part of Korea. 222 early mature variety and 219 late mature variety were grown from sep.1993 to jun. 1994 at experimental field of Muan-Gun area, and yield components and yield of onion plant ware observed. Early mature onion cv. Changnyeongchunghwan-gkeukjoseng and Keumjungjoseng showed higher yield than other early mature variety used in the experiment. It showed relatively long plant height and leaf sheath length and, height of bulb and diameter of bulb and high weight of bulb. Late mature onion cv. Chunjudaego showed higher yield than other late mature variety used in the experiment. It showed relatively long plant height and leaf sheath length and diameter of bulb, and high weight of bulb. Therefore, it was concluded that Changnyeongchunghwangkeukjoseng,Keumjungjoseng and Chunjudaego were the most suitable early and late mature varieties with high yield at the southern part of Korea.

• Korean Journal of Plant Resources
• /
• v.25 no.6
• /
• pp.745-752
• /
• 2012

Compared to wide ranges of genetic variation of natural populations, very limited Miscanthus cultivar has been released. This study was the first report on the development of Miscanthus cultivar by means of radiation breeding. Seeds of M. sinensis were initially exposed to gamma rays of 250 Gy for 24 h, generated from a $^{60}Co$ gamma-irradiator. The irradiated seeds were sown and then the highly tiller-producing mutants were selected for this study. Biomass-related parameters including tiller number, plant height, stem diameter, and leaf number were measured. Ploidy level and internal transcribed spacer (ITS) were investigated to characterize the mutants compared to wild type (WT) Miscanthus. Plant height and tiller number were negatively related, where multi-tillering mutants were relatively short after 4 month growth. However stem diameter and leaf number were greater in mutants. All the materials used in this study were diploid, implying that the mutants with greater tiller numbers and stem diameter were not likely related to polyploidization. Based on the sequence of ITS regions, the mutants demonstrated base changes from the gamma irradiation where G+C content (%) was decreased in the ITS1, but increased in ITS2 when compared to WT sequence. ITS2 region was more variable than in ITS1 in the mutants, which collectively allows identification of the mutants from WT. Those mutants having enhanced tillers and allelic variations might be used as breeding materials for enhanced biomass-producing Miscanthus cultivars.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.240-244
• /
• 1997

This study was conducted in North Sulawesi, Indonesia to identify the factors affecting reproductive efficiency and to determine the contribution of each factor in reproductive efficiency of Indonesian native cows. Records of reproductive efficiency, body size (hip height, body weight, body length, heart girth) as well as age on one hundred and sixty seven Indonesian native cows (seventy six cows of the Bali breed and ninety one cows of the synthetic breed from unknown proportion of th Madura, the Sumba and the Ongole breeds) of 58 farmers were available in this research. The data were analyzed by covariance analysis using SAS package including reproductive efficiency as a dependent variable and breed, body size (hip height, body weight, body length, heart girth) and age of cows as independent variables. The contribution of each independent factor to dependent variable was estimated as the percentage of the sum of square in the corrected total sum of squares. The results showed that body weight and body size of cows would be considered as th most important factors affecting reproductive efficiency of Indonesian native cows. Therefore, the reproductive efficiency could be increased by 1) using cows that reached a target weight of at least 250 kg, 2) using cows with relatively well developed height at hip of at least 117 cm, heart girth of at least 150 cm, and body length of at least 125 cm, 3) keeping breeding cows that reach a target age of 24 months old with the maximum interval between postpartum and next breeding season of 90 days for each year, and 4) using good nutritional feeding to reach the optimum weight and body condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1632-1637
• /
• 2006

We studied the changes in biochemical markers of bone metabolism in growing Thoroughbred horses. Serum osteocalcin (OC), as a marker for bone formation, and carboxy-terminal propeptide of type-I collagen (PICP), as a marker for bone formation, carboxy-terminal telopeptide of type-I collagen (ICTP), as a marker for bone resorption, were determined in nine clinically healthy horses from 3 d to 17 mo of age. The BW and withers height (WH) increased during the study. On the other hand, a rapid reduction in body weight gain (BWG) was observed between 1 mo and 9 mo of age and a rapid reduction in withers height gain was observed between 1 mo and 5 mo of age. The serum markers decreased significantly with increasing age. In particular, dramatic changes in serum markers occurred between 3 d to 1 wk and 5 to 7 mo of age in these horses, which suggests that bone turnover rapidly decreased after birth. On the other hand, the ratio of PICP to ICTP decreased through the experiment. This result suggests that the reduction in bone formation exceeded that of bone resorption. There was a significant correlation between markers and growth parameters, except for the correlation between PICP and BWG on single linear regression analysis. Serum OC and ICTP were affected by the WH in multiple linear regression analysis. These results indicated that the age-related variation in serum biochemical markers of bone metabolism reflected bone growth, but neither BW nor BWG. Therefore, we consider that changes in bone modeling are the major factor affecting the levels of serum biochemical markers by 17 mo of age in horses.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.55-64
• /
• 2018

The purpose of this study is to evaluate the suitability of emergency underground cavity restoration method filling cavity with expansive material based on numerical analysis. For the numerical analysis, experiments were conducted to evaluate properties of expansive material. Based on the measured expansion pressure of the expansive material from the experiment, behavior of underground cavity restoration with various cavity dimensions (variation of height and width of rectangular-shape cavity) was numerically assessed. As a result of analysis, the vertical displacements of the top and bottom of cavity were significantly influenced by the cavity width and lateral displacements of cavity sides were highly dependent on cavity height. These vertical and lateral displacements were increased with increasing expansion pressure of expansive material. Also, when the expansion pressure was applied, the vertical displacement of the upper surface layer of the road was less dependent on cavity height, and was greatly influenced by cavity width.

• Atmosphere
• /
• v.17 no.4
• /
• pp.315-326
• /
• 2007

The effects of windbreaks on the reduction of suspended particles are investigated using a computational fluid dynamics (CFD) model with the ${\kappa}-{\varepsilon}$ turbulence closure scheme based on the renormalization group (RNG) theory. In the control experiment, the recirculation zones behind the storage piles are generated and, as a whole, relatively monotonous flow patterns appear. When the windbreaks with the 0% porosity are constructed, the recirculation zones are generated by the windbreaks and very complicated flow patterns appear due to the interference between the windbreaks and storage piles. The porosity of the windbreaks suppresses the generation of the recirculation zone and decreases the wind velocity in the windbreaks as well as that outside the windbreaks. As the emission of suspended particles from the storage piles are closely related with the friction velocity at the surfaces of the storage piles, variation of the friction velocity and total amount of the emission of the suspended particles with the height and porosity of the windbreaks are investigated. The results show that higher and more porous windbreaks emit less suspended particles and that the reduction effect of the porosity is still more effective than that of the height. In the case of the windbreak with 30 m height and 50% porosity, friction velocities above the storage piles are smaller than the critical friction velocity above which particles would be suspended. As a result, total amount of suspended particles are much fewer than those in other cases.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.965-973
• /
• 2010

Numerical analysis has been carried out to investigate the heat transfer characteristics of a plate heat exchanger. The multi-cell models with inlet part and outlet part are used for performing numerical simulation. The plate heat exchanger is characterized by chevron angle of $15^{\circ}$, corrugation pitch of 24mm and corrugation height 6~12mm. The length of the inlet-part considered in the analysis ranges from 24.8 to 124mm and Reynolds numbers range from 1,000 to 10,000. The correlations such as friction factor and Colburn factor are compared with previous experimental data. The results can be utilized for designing the plate heat exchanger.