• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.43-51
• /
• 2004

Input impedance of the inverted L antenna which is modified from a monopole antenna varies to very high input impedance value when the ration of vertical height to horizontal length is reduced. So its impedance matching becomes very difficult. In this paper, we analyzed the input impedance variation range depending on the ratio of vertical height to horizontal length in the normal and ferrite thin film added configuration for the input impedance control. For the exact analysis involving the permittivity, permeability and conductivity of ferrite material, FDTD numerical method is used.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.5-10
• /
• 2012

The effect of pressure-side opening length on three-dimensional flow fields and aerodynamic losses downstream of a cavity squealer tip has been investigated in a turbine rotor cascade for the squealer rim height-to-chord ratio and tip gap height-tochord ratio of $h_{st}/c$ = 5.05% and h/c = 2.0% respectively. The opening length-to-camber ratio is changed to be $OL/c_c$ = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.7 The results show that longer OL leads not only to weaker secondary flow but also to lower aerodynamic loss in the tip leakage vortex region, while it significantly widens the area with high aerodynamic loss in the passage vortex region. The aerodynamic loss coefficient mass-averaged all over the measurement plane is kept almost constant for $0.0{\leq}OL/c_c{\leq}0.3$, whereas it increases rapidly for $OL/c_c$ > 0.3 in proportion to $OL/c_c$. There is little deterioration in flow turning with increasing $OL/c_c$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.3
• /
• pp.213-220
• /
• 2002

Modifying effects of the rectangular forward step for suppressing the unsteady pressure fluctuation during interaction between the upstream vortical flow and the edge are studied numerically. The vertical flow is modeled by a point vortex, and the unsteady pressure coefficient is obtained from the velocity and the potential fields. To investigate the effects of the edge shape the rectangular forward step is chamfered wish various angles. Calculation shows that the pressure peaks become decreased by increasing the vortex height as well as the chamfering angle. The pressure amplitudes are very sensitive to the change of the initial vertex height and its strength. From this study we can find out that the chamfered edge has two effects; the one is that it suppresses the pressure amplitude generated from the edge, and the other is that it decreases the time variation of unsteady pressure fluctuation. These modifying concepts can be applied to attenuate the self-sustained oscillation mechanism at the open cavity flow.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.888-903
• /
• 2006

This study analyze the change of wind pattern and intensity according to the transform of surface conditions, such as land use and height of terrain, over the leeward region. In order to do this, we have employed 'Envi-met' microscale atmospheric numerical model. When the same wind condition is considered, the wind speed of base case having natural surface condition of Chunsudae shows the weakest strength among different cases such as the 'bare case' and the '20 m case' which the plants is removed and the height of terrain is flatted as 20 m above the sea level over the Chunsudae, respectively. The weakening of wind speed is a maximum of $4{\sim}8 m/s$ when the inflow wind speed is 55 m/s.

• Plant Resources
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2002

Genetic improvement of the cultivated soybean [Glycine max (L.) Merr] may be possible through hybridization with its wild progenitor, G. soja Sieb. & Zucc. Interspecific cross between G. max (Hwangkeumkong) and G. soja (IT.182932) was made in the summer of 1997. In F$_2$ the percentage of plant height, nodes per plant, and pods per plant were high but gradually reduced from F$_2$ to F$_4$. In contrast pod length, seeds per pod, and 100-seeds weight were increased gradually through generations advanced. Wild variation as evident in F$_2$ in plant height, number of branches, pods per plant, and 100-seeds weight. Twenty six percent of the F$_2$, 44 % of the F$_3$ and 60% of the F$_4$ segregants showed more G. max traits. The combination of useful traits from both species is possible through interspecific hybridization. The characters that could be transferred from wild species to cultivated species are more pod number, better capacity, and resistance to disease and insects. The interspecific derivatives offer scope for selection for high grain yield. Therefore, introducing genes from G. soja to G. max could be contribute to greater genetic diversity of future cultivars. And semicultivated soybean had some desired characteristics including tolerance to adverse environments and multi-seed characters. It means the infusing of semicultivated germplasm to the cultivated soybean could increase number of seeds and pods per plant significantly, and consequently could enhance selecting potential on yield.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.2
• /
• pp.49-63
• /
• 1998

The purpose of this study is to study real body size and ideal body shape by considering the degree of satisfaction of body part and understanding body size by the degree of leanness/obesity. The subjects in this study were 420 males from 18 to 25 years old. Body measurements and surveys were taken and analyzed by mean, standard variation, correlation analysis, regression analysis, crosstabulation analysis, cluster analysis, one-way ANOVA, and Duncan's Test. The results of analyses indicate that the subjects tended to be satisfied with thick chest and upper limbs, wide shoulder width, and preferred to be tall and have big hands and feet. By cluster analysis of 19 variables, the subjects were divided into 4 groups, each consisting 41, 138, 134, and 47 males. Because the 19 variables were body measurements transformed to eliminate the body size factor, this classification was considered to express how lean or how obese a human body appears. The results of one way ANOVA and Duncan's Test indicate that, according to the degree of leanness/obesity from Group I (lean tendency) to Group IV(obese tendency), characteristics of the body shape changed as follows; height became lower, limbs became shorter, trunk and limbs became thicker and weight became heavier. Also it showed that Group IV were most satisfied with chest girth, upper limb girth and shoulder width and Group I with height, hip girth and waist girth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.46-52
• /
• 2009

This paper design QHA(quadrifilar helical antenna) to receive efficiently Satellite-Digital Multimedia Broadcasting video signal. It is designed as quadrifilar structure with phase variation $0^{\circ}C$, $90^{\circ}C$, $180^{\circ}C$, $270^{\circ}C$ to obtain circular polarization. Upper gap, turn number and height of QHA are varied to obtain optimization dimensions. Optimization dimensions are gap=2.2mm, turn number=0.9, height=42mm and input reflection coefficient is approximately -5.8dB. Designed QHA can be applied to Satellite-DMB terminal.

• Journal of Korean Port Research
• /
• v.15 no.1
• /
• pp.47-56
• /
• 2001

A numerical model for practical use based on the 1-line theory is presented to simulate shoreline changes due to construction of offshore structures. The shoreline change model calculates the longshore sediment transport rate using breaking waves. Before the shoreline change model execution, a wave model, adopting the modified Boussinesq equation including the breaking parameters and bottom friction term, was used to provide the longshore distribution of the breaking waves. The contents of present model are outlined first. Then to examine the characteristics of this model, the effects of the parameters contained in this model are clarified through the calculations of shoreline changes for simple cases. Finally, as the guides for practical application of this model, several comments are made on the parameters used in the model, such as transport parameter, average beach slope, breaking height variation alongshore, depth of closure, etc. with the presentation of typical examples of 3-dimensional movable bed experimental results for application of this model. Here, beach change behind the offshore structures is represented by the movement of the shoreline position. Analysis gives that the transport parameters should be taken as site specific parameters in terms of time scale for the shoreline change and adjusted to achieve the best agreement between the calculated and the observed near the structures.

• Ocean Systems Engineering
• /
• v.8 no.1
• /
• pp.57-77
• /
• 2018

The present paper deals with the finite element analysis of water tanks with rigid baffle. Fluid is discretized by two dimensional eight-node isoparametric elements and the governing equation is simulated by pressure based formulation to reduce the degrees of freedom in the domain. Both free vibration and force vibration analysis are carried out for different sizes and positions of block at tank bottom. The fundamental frequency depends on block height and it reduces with the increase of block height. The variation of hydrodynamic pressure on tank walls not only depends of the exciting frequency but also on the size and position of rigid block at tank bottom. The hydrodynamic pressure has higher value when the exciting frequency is equal and lower than the fundamental frequency of the water in the tank. Similarly, the hydrodynamic pressure increases with the increase of width of the block for all exciting frequencies when the block is at the centre of tank. The left and right walls of tank have experienced different hydrodynamic pressure when the block is placed at off-centre. However, the increase in hydrodynamic pressure on nearest tank wall becomes insignificant after a certain value of the distance between the wall and the rigid block.

• Journal of Plant Biology
• /
• v.5 no.1
• /
• pp.1-6
• /
• 1962

1) Germination rate was rather irregular than decreasing as increasing dose of radiation and there were no differences between Kyong-Sam and Chuong-Bang of Chinese cabbage. 2) In R1 generation, abnormal leaves from seedling of irradiated seeds were observed. These were more apparent in X-ray irradiation than in thermal neutron. 3) Seedling height was inhibited with increasing dose of X-ray and thermal neutrons. Growth inhibition was more remarkable in X-ray than in thermal neutron. Kyong-Sam demonstrated more sensitivity than Chyong-Bang in both X-ray and thermal neutron. 4) Seedling height produced from seeds subjected to thermal neutrons showed small variation around its mean value, while in X-irradiation there was a greater deviaton from the mean value. 5) Fertility was decreased as increasing with dose, while the frequency of abortive pollen was increased. There were variability of the fertility and frequency of abortive pollen among plants or branches of a plant. 6) The mutants were obtained more in thermal neutron irradiation than in X-ray. The types of mutations obtained in Chinese radish of R2 generation were abnormal leaf, densely glowing leaf, degeneration in growing point and dwarf. The maximum frequency of phenotypic mutations was abnormal leaf mutation.