• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.285-293
• /
• 2016

The high velocity oxygen fuel(HVOF) thermal spray is a kind of surface modification techniques to produce the sprayed coating layer. This process is to form the coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. The efficiency of thermal spraying is dropped, however, because the semi-molten powder in a spray process become a factor that degrades the mechanical property by the formed pore within the coating layer. Therefore, it is necessary to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesive force. In this study, to improve the wear resistance, corrosion resistance and heat resistance, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps used in ironworks are manufactured with STS $420J_2$ and are coated by the powders of WC-Co-Cr and WC-Cr-Ni including the WC of high hardness using a HVOF thermal sprayer developed in this laboratory. These are called by the surface-modified plungers. The surface roughness, hardness, and surface and cross-sectional microstructure of these two surface-modified and conventional ceramic plungers are measured and compared before operation with after operation for 100 days. It is found that the values of centerline average surface roughness and maximum height for conventional ceramic plunger are 9.5 to 10.8 and 5.2 to 5.7 times higher than those of surface-modified ones coated by WC-Co-Cr and WC-Cr-Ni because the fine tops and bottoms on surface roughness curve of conventional ceramic plunger are approximately 100 times higher than those of surface-modified ones. In addition, the pores and scratches in the surface microstructure are considerably formed in the order of conventional ceramic, WC-Cr-Ni and WC-Co-Cr surface-modified plungers. The greater the WC content of high hardness powder is less the change in the plunger surface.

• 한국분무공학회지
• /
• 제16권4호
• /
• pp.176-185
• /
• 2011

The empirical correlations for the prediction of penetration height of liquid jet in crossflow are reviewed and classified in this study. Around thirty different correlations had been proposed by many investigators. It has generally known that the penetration height of a liquid jet in a cross-flow is a function of the liquid to air momentum flux ratio and the normalized downstream distance from the injector. However, several researchers incorporated the Weber number, liquid-to-water or air viscosity ratio, pressure ratio or Reynolds number, temperature ratio in the empirical correlations. The existing correlations can be grouped as correlations in a power-law, logarithmic, and exponential forms, respectively. Correlations in a power-law form can be further classified as three groups such as basic form, Weber number form and other parameters form. It should be pointed out that correlations in a logarithmic form in terms of Weber number or any other parameters could not be found. Universal correlation has still not been established due to the significant discrepancies between various correlations suggested to date. Several of the studies reported the significant discrepancies of predicted values by the existing correlations. The possible reasons for discrepancies will be summarized as measurement technique, assumptions made in defining terms in the liquid to air momentum flux ratio, difficulties in defining the boundaries of the liquid jets, and nozzle/injector geometry. Evaluation of validity for the correlations proposed recently by several investigators is essentially required. Those include eight power-law forms, two logarithmic forms, and one exponential form.

• 농약과학회지
• /
• 제21권1호
• /
• pp.9-16
• /
• 2017

국내에서 재배면적이 가장 넓은 과수인 사과에 대하여 전국 주산단지 포함 17개 시 군 지역 395농가를 대상으로 품종, 수관높이, 재식거리 등의 재배형태 및 농약 살포 물량, 살포기의 종류, 사용 노즐의 종류 등 농약의 살포 방법에 대한 조사를 수행하였다. 사과 품종은 Fuji와 Hongro가 79.2%, 50.9%로 주로 재배되었으며, 재배방식은 주로 저수고 고밀식 재배 형태를 보였다(열간거리: 4.0~4.5 m (73.1%), 재식거리: 1.5~3.5 m (88.6%), 수관높이: 3.0~4.5 m (88.2%)). 주로 사용하는 살포기는 스피드스프레이어 77.6%, 동력 분무기 22.1%로 나타났다. 농약의 단위 면적당(10a) 살포물량은 농약을 적게 살포하는 시기인 4월에는 250~300 L, 농약을 많이 살포하는 시기인 6~8월에는 300~400 L를 주로 살포하는 것으로 조사되었다. 재배유형 및 지역간의 살포물량 차이를 분석한 결과 관행재배와 저수고 고밀식재배 유형에서는 유의적인 차이가 나타나지 않았으나 지역별로는 유의적인 차이를 나타냈다. 동력분무기를 사용할 때 주로 사용하는 노즐은 대포노즐 45%, 회전곡자노즐 26%, 2~3구 플라스틱 금속 노즐이 25%로 나타났다. 이상의 결과들은 농가의 현실을 반영한 농약 살포 물량 설정, 농약의 작물 잔류성 자료 및 약효 자료 평가 등 농약의 등록 관련 정책 수립에 기초자료로 활용될 수 있을 것으로 보인다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.90-95
• /
• 2016

Leidenfrost drops with ellipsoidal shaping can control the bouncing height by adjusting the aspect ratio(AR) of the shape at the moment of impact. In this work, we focus on the effect of the AR and the impact Weber number(We) on the non-axisymmetrical spreading dynamics of the drop, which plays an important role in the control of bouncing. To understand the impact dynamics, the numerical simulation is conducted for the ellipsoidal drop impact upon the perfect non-wetting solid surface by using volume of fluid method, which shows the characteristics of the spreading behavior in each principal axis. As the AR increases, the drop has a high degree of the alignment into one principal axis, which leads to the consequent suppression of bouncing height with shape oscillation. As the We increases, the maximum spreading diameters in the principal axes both increase whereas the contact time on the solid surface rarely depends on the impact velocity at the same AR. The comprehensive understanding of the ellipsoidal drop impact upon non-wetting surface will provide the way to control of drop deposition in applications, such as surface cleaning and spray cooling.

• 한국분무공학회지
• /
• 제2권2호
• /
• pp.35-42
• /
• 1997

An innovating technique of atomizer has been proposed to supply and to atomise molten materials. Both of a simple geometry of nozzle and an improved nozzle have been fabricated in the present study. With these nozzles, characteristics of the suction and disintegration have been empirically investigated. The important conclusions are as follows; In the case of a simple nozzle: 1) Although the sucking up and supplying of molten materials are available, the applications of powder metallurgy are limited. 2) It is concluded that the more air flow rate, $W_A$ or the shorter the height of air nozzle from the surface of supplied water, $L_h$, the more the atomizing mass of liquids, $W_L$. In the case of an improved nozzle: 3) The stable liquids can be supplied due to cut off the passage of surrounding air entrainment by air jets. 4) The atomizing mass of liquids, $W_L$ has affected not so much on the height of nozzle from the surface of supplied water, $L_h$ as that from the orifice, hc.

• 한국분무공학회지
• /
• 제28권3호
• /
• pp.126-133
• /
• 2023

This study analyzes the flow characteristics and sponge ball recovery performance in a ball strainer according to vortex promoter design variables through flow-particle analysis based on actual experiments to derive a method for improving the recovery rate of cleaning sponge balls of CTCS applied to existing power plants. Based on the ball strainer in CTCS used in the power plant, the experiment was conducted by changing the design factor of the improved shape. In addition, flow and particle analysis were performed under the same conditions as the experiment to numerically the flow characteristics and recovery rate in the ball strainer according to the design factor of the vortex promoter. As a result of the study, it was confirmed that the recovery performance was improved by about 3% by changing the design height of the Vortex promoter. And when comparing the difference between maximum and minimum recovery rate, it was found that the effect on the recovery performance increased slightly according to the distance condition compared to the vortex promoter design height condition.

• 생물환경조절학회지
• /
• 제28권2호
• /
• pp.126-133
• /
• 2019

사과 표면의 온도 측정 결과, '후지' 품종에서 무처리구가 $44^{\circ}C$로 가장 높게 나왔으며, 미세살수 처리구가 $35^{\circ}C$로 가장 낮아 사과의 표면온도를 직접적으로 낮추는데 가장 효과적이었고, '홍로' 품종에서는 방풍망 처리구가 무처리구에 비해 약 $9^{\circ}C$의 온도하강 효과를 나타내었다. 조도 및 광량은 방풍망 처리구가 $53.26^3lx$로 무처리구의 $90.28^3lx$에 비하여 유의하게 낮은 결과를 보였다. 그리고 오후 시간의 햇볕은 파장이 긴 적색광으로 과실의 품온이 증가하고 광합성량이 증가되는 반면 과실의 호흡량이 증가하여 색소 발현 및 저장양분의 축적에 저해요인으로 작용하는 것으로 판단되었다. 또한, 방풍망을 이용한 차광으로 빛의 강도와 온도를 인위적으로 낮추어 광포화점이 발생하지 않는 정도에서 충분한 채광시간과 효율적인 광합성작용을 유도 하는 것이 과실품질을 향상시킬 수 있는 방법으로 판단되었다. '후지'와 '홍로'의 최대양자수율 Fv/Fm 값이 다른 처리들보다 무처리구에서 0.74로 가장 낮은 것으로 조사되었는데 이는 미세살수, 방풍망 처리구가 무처리구에 비해 높은 광합성 효율을 나타내고 있음을 시사하였다. '후지'의 일소피해 조사결과 미세살수 처리구는 5%, 방풍망 처리구는 7%로 무처리구에 비하여 일소발생이 약 15% 경감되었고 '홍로'의 경우는 미세살수 처리구는 22%, 방풍망 처리구는 25%로 무처리구에 비하여 일소발생이 약 7% 감소하였다. '홍로'의 일소피해 발생이 '후지'에 비해서 높았던 이유는 '홍로'가 '후지'보다 비대 속도가 빠르며 광을 받는 과실 표면의 면적이 상대적으로 컸기 때문으로 판단되었다. 착색지수 중 적색도($a^*$)의 경우 '후지' 품종에서 무처리구에 비하여 미세살수와 방풍망 처리구가 각각 26% 및 34%로 착색향상을 개선할 수 있었다. 이상의 결과를 종합하면, 사과 주요 품종에 대한 미세살수 및 방풍망 처리는 추후 기후변화로 인인 사과생육기 고온증상으로 발생할 수 있는 과실일소 및 착색불량 등 과실품질저해요인을 저감할 수 있는 현장적용이 가능한 기술로 판단되었고, 또한 이로 인한 상품성 증가로 농가 소득증대에 기여할 것으로 판단되었다.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• 원예과학기술지
• /
• 제31권5호
• /
• pp.544-551
• /
• 2013

The effect of different silicon (Si) sources and methods of application on the growth of two chrysanthemum cultivars grown in a soilless substrate was investigated. Rooted terminal cuttings of Dendranthema grandiflorum 'Lemmon Eye' and 'Pink Eye' were transplanted into pots containing a coir-based substrate. A nutrient solution containing 0 or $50mg{\cdot}L^{-1}$ Si from calcium silicate ($CaSiO_3$), potassium silicate ($K_2SiO_3$) or sodium silicate ($Na_2SiO_3$) was supplied once a day through an ebb-and-flood sub irrigation system. A foliar spray of 0 or $50mg{\cdot}L^{-1}$ Si was applied twice a week. Cultivar and application method had a significant effect on plant height. Cultivar, application method, and Si source had a significant effect on plant width. Of the three Si sources studied, $K_2SiO_3$ was found to be the best for the increasing number of flowers, followed by $CaSiO_3$ and $Na_2SiO_3$. In both the cultivars, sub irrigational supply of Si developed necrotic lesions in the older leaves at the beginning of the flowering stage as compared to the control and foliar spray of Si. Cultivar, application method, Si source, and their interactions had significant influence on leaf tissue concentrations of calcium (Ca), potassium (K), phosphorus (P), magnesium (Mg), sulfur (S), sodium (Na), boron (B), iron (Fe), and zinc (Zn). The addition of Si to the nutrient solution decreased leaf tissue concentrations of Ca, Mg, S, Na, B, Cu, Fe, and Mn in both cultivars. The greatest Si concentration in leaf tissue was found in 'Lemmon Eye' ($1420{\mu}g{\cdot}g^{-1}$) and 'Pink Eye' ($1683{\mu}g{\cdot}g^{-1}$) when $K_2SiO_3$ was applied through a sub irrigation system and by foliar spray, respectively.

• 한국응용곤충학회지
• /
• 제19권1호
• /
• pp.5-9
• /
• 1980

본 시험은 살충제 제제원액(Sumithion ULV 80, Sevin oil ULV 50, Salithion EC25, Dimethoate EC 50, Zolone EC 25, Folimat EC 50)과 고농도 희석액(Salithion, Dimethoate 10, 20, 40배)의 ULV 엽면살포에 의한 술잎혹파리방제 효과를 비교 검토코자 실시하였다. 1. 제제원액 살포시험에서는 약제의 종류와 철포시기(5월 19일, 26일, 6월 2일, 9일)에 따라 방제효과에 현저한 차이가 있었으면 그 방제효과는 Salithion, Sumithion, Dimethoate, Sevin oil, Zolone 및 Folimat의 순이였으며 대부분 5월 26일 처리에서 비교적 방제 효과가 좋았다. 그리나 문제는 Zolone을 제외한 다른 공시약제들은 보다 처리시기에 상관없이 약해가 발생하였다. 2. 고농도 희석액 살포시험에서는 희석배수, 처리시기(6월 2일, 9일)에 상관없이 Dimethoate에 비하여 Salithion 처리에서 방제효과가 높았으며 약해도 발생하지 않었다. 3. 본 시험의 결과를 종합하여 볼 때 Salithion 유제를 10배로 희석하여 5월 중하순에서 6월 상순경에 걸쳐 ULV 1회 엽면살포로서 성력적인 솔잎혹파리적 약제방제가 가능할 것으로 사료된다.