• 한국산림과학회지
• /
• 제96권2호
• /
• pp.189-196
• /
• 2007

Allometry, basal area equations, and volume equations were developed with various tree measurement variables for the major species, Quercus mongolica and Quercus variabilis, in Korean natural hardwood forests. For allometry models, the relationships between total height-DBH, crown width-DBH, height to the widest portion of the crown-total height, and height to base of crown-total height were investigated. Multiple regression methods were used to relate annual basal area growth to tree variables of initial size (DBH, total height, crown width) and relative size (relative diameter, relative height) as well as competition measures (competition index, crown class, exposed crown area, percent exposed crown area, live crown ratio). For tree volume equations, the combined-variable and Schumacher models were fitted with DBH, total height and crown width for both species.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.228-233
• /
• 2016

In this paper, we propose a nonlinear maximum average correlation height (MACH) filter for information authentication of photon counting double random phase encryption (DRPE). To enhance the security of DRPE, photon counting imaging can be applied because of its sparseness. However, under severely photon-starved conditions, information authentication of DRPE may not be implemented successfully. To visualize the photon counting DRPE, a three-dimensional imaging technique such as integral imaging can be used. In addition, a nonlinear MACH filter can be utilized for helping the information authentication. Therefore, in this paper, we use integral imaging and nonlinear MACH filter to implement the information authentication of photon counting DRPE. To verify our method, we implement optical experiments and computer simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3196-3210
• /
• 2014

This paper presents a novel video metrology approach based on robust tracking. From videos acquired by an uncalibrated stationary camera, the foreground likelihood map is obtained by using the Codebook background modeling algorithm, and the multiple moving objects are tracked by a combined tracking algorithm. Then, we compute vanishing line of the ground plane and the vertical vanishing point of the scene, and extract the head feature points and the feet feature points in each frame of video sequences. Finally, we apply a single view mensuration algorithm to each of the frames to obtain height measurements and fuse the multi-frame measurements using RANSAC algorithm. Compared with other popular methods, our proposed algorithm does not require calibrating the camera, and can track the multiple moving objects when occlusion occurs. Therefore, it reduces the complexity of calculation and improves the accuracy of measurement simultaneously. The experimental results demonstrate that our method is effective and robust to occlusion.

• 한국산림과학회지
• /
• 제110권1호
• /
• pp.72-81
• /
• 2021

본 연구는 다양한 임목 정보를 측정하고 효과적으로 관리하기 위해 스마트폰 애플리케이션과 웹 애플리케이션 서버(Web Application Server, WAS)를 개발하였다. 수고, 방위, 고도, 경사, 위치 좌표는 스마트폰에 내장된 동작센서를 통해 취득된 각도를 삼각법에 적용하여 측정하였으며, 흉고직경 및 거리는 Google AR Core에서 제공하는 AR API(Application Programming Interface)를 응용하여 측정할 수 있도록 하였다. 웹 애플리케이션 서버는 스마트폰이 측정한 데이터를 수신하여 저장, 조회, 출력하고 수목의 위치를 카카오 맵에 표시할 수 있도록 개발하였다. 또한, 개발된 애플리케이션의 정확성을 평가하기 위해 인공 침엽수림에서 잣나무 90본, 천연 혼효림에서 무작위로 90본을 선정하여 버텍스 및 윤척과 비교하였다. 비교 결과, 흉고직경과 수고 모두 95% 수준에서 유의한 결과를 나타내었으며, 흉고직경의 경우 인공 침엽수림이 평균 0.6745 cm, 천연 혼효림에서는 평균 1.0139 cm의 오차를 보였다. 수고는 인공 침엽수림이 평균 0.6714 cm, 천연 혼효림은 평균 1.3297 m의 오차를 보였다.

• 한국측량학회지
• /
• 제24권1호
• /
• pp.57-64
• /
• 2006

최근 영상과 수치지도론 이용하여 빌딩의 고도 추출 연구가 활발히 진행되고 있다. 본 연구는 단영상과 수치지도를 이용하여 건물의 고도값을 추출을 목표로 하였다. 이를 위하여 항공사진측량학적 방법론을 기본으로 하고 이에 monoplotting 방법을 활용하여 지상좌표와 영상좌표의 상관관계를 적용하여 단 영상에서의 건물 고도값을 추출할 수 있었으며 정착도를 비교하기 위하여 1:5000 항공사진을 이용하여 추출한 고도값을 기준으로 비교분석 하였다. 그 결과 IKONOS 단영상과 수치지도를 이용하여 건물의 고도값을 일정 범위내의 값으로 복원할 수 있음을 알 수 있었다.

• 대한공간정보학회지
• /
• 제23권4호
• /
• pp.67-74
• /
• 2015

GNSS/Leveling기술은 GNSS기술과 Leveling기술을 이용하여 기하학적 방법으로 지오이드고를 얻을 수 있게 해주며, GNSS/Geoid기술은 GNSS기술을 통해 얻은 타원체고에서 Geoid기술을 통해 얻은 지오이드고를 제하여 정표고를 얻는 기술을 말한다. 본 연구에서는 GNSS/Geoid기술을 이용한 표고결정 정확도를 검증하기 위하여 GNSS 타원체고 측정의 정확도를 검증하고자 하였다. 연구를 위하여 경남 지역에 테스트 베드(test bed)를 선정하고 GNSS 정적측위관측을 실시하였으며, 여러 가지 해석 조건에 따라 데이터를 처리함으로써 관측조건에 따른 GNSS 타원체고 측정의 정확도를 규명하였다. 연구결과 GNSS 정적측위방법에 의한 타원체고 결정에 있어서 3cm의 목표정확도를 확보하기 위해서는 측량지역 주변부의 네 점의 기지점을 고정하여 두 시간 이상 관측하여야 하며 기선거리는 20km로 제한하여야 한다는 것을 알 수 있었다.

• 한국지리정보학회지
• /
• 제11권2호
• /
• pp.51-60
• /
• 2008

본 연구는 부산시의 최저고도지구의 적정성을 평가하는데 목적이 있다. 이를 위해 도심부의 최저고도지구에 대한 실태조사를 실시하였다. 조사결과, 도심부의 최저고도지구는 4층(12m)이상 건축해야 함에도 불구하고 4층 이하 건축물이 51%를 차지하였고, 평균층수도 4층이었다. 도심부의 건축물은 토지이용의 고도화와 가로경관을 위해 정책적으로 관리되고 강화되어야 할 필요가 있다. 이에 본 연구에서는 전문가 설문조사 결과 등을 토대로 전면도로폭원(35m)과 이면도로폭원(8m)의 평균을 최저도고도지구의 최저기준높이로 설정하고, 도심부에 대해서는 토지의 고도이용을 위해 최저고도지구 기준을 7층(21m) 이상 상향시킬 필요가 있다는 제안을 하였다.

• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.159-166
• /
• 1999

A system to extract continuously the real 3-D geometric fearture information from 2-D image of an object, which is fed randomly via conveyor has been developed. Two sets of structured laser lightings were utilized. And the laser structured light projection image was acquired using the camera from the signal of the photo-sensor mounted on the conveyor. Camera coordinate calibration matrix was obtained, which transforms 2-D image coordinate information into 3-D world space coordinate using known 6 points. The maximum error after calibration showed 1.5 mm within the height range of 103mm. The correlation equation between the shift amount of the laser light and the height was generated. Height information estimated after correlation showed the maximum error of 0.4mm within the height range of 103mm. An interactive 3-D geometric feature extracting software was developed using Microsoft Visual C++ 4.0 under Windows system environment. Extracted 3-D geometric feature information was reconstructed into 3-D surface using MATLAB.

• Journal of Information Processing Systems
• /
• 제18권2호
• /
• pp.223-234
• /
• 2022

The evaluation of the print quality of 3D printing has traditionally relied on manual work using dimensional measurements. However, the dimensional measurement method has an error value that depends on the person who measures it. Therefore, we propose the design of a new print quality measurement method that can be automatically measured using the field-of-view (FOV) model and the intersection over union (IoU) technique. First, the height information of the modeling is acquired from a camera; the output is measured by a sensor; and the images of the top and isometric views are acquired from the FOV model. The height information calculates the height ratio by calculating the percentage of modeling and output, and compares the 2D contour of the object on the image using the FOV model. The contour of the object is obtained from the image for 2D contour comparison and the IoU is calculated by comparing the areas of the contour regions. The accuracy of the automated measurement technique for determining, which derives the print quality value was calculated by averaging the IoU value corrected by the measurement error and the height ratio value.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권1호
• /
• pp.1-12
• /
• 2003

This paper describes a study on the abnormal behavior of the electrical characteristics of the (n)GaAs/Ti/Pt/Au Schottky contacts prepared by the two techniques of electron beam deposition and rf sputtering and after an annealing treatment. The samples were characterized by I-V and C-V measurements carried out over the temperature range of 150 - 350 K both in the as prepared state and after a 300 C, 30 min. anneal step. The variation of ideality factor with forward bias, the variation of ideality factor and barrier height with temperature and the difference between the capacitance barrier and current barrier show the presence of a thin interfacial oxide layer along with barrier height inhomogenieties at the metal/semiconductor interface. This barrier height inhomogeneity model also explains the lower barrier height for the sputtered samples to be due to the presence of low barrier height patches produced because of high plasma energy. After the annealing step the contacts prepared by electron beam have the highest typical current barrier height of 0.85 eV and capacitance barrier height of 0.86 eV whereas those prepared by sputtering (at the highest power studied) have the lowest typical current barrier height of 0.67 eV and capacitance barrier height of 0.78 eV.