• 제목/요약/키워드: Height Difference

검색결과 3,010건 처리시간 0.026초

옥상 저류조 설치에 따른 최상층 실내열환경 변화에 관한 모형 실험연구 (The Variation of Top Floor Indoor Thermal Environment with Roof Storage Using Model Experiment)

  • 박봉길;이경희;장승재
    • 한국주거학회논문집
    • /
    • 제20권3호
    • /
    • pp.105-112
    • /
    • 2009
  • The purpose of this study is to investigate a top floor, indoor, thermal environment by comparison between the indoor air temperature and the rooftop surface temperature, and between the indoor air temperature and the outdoor air temperature using an experimental model. The model experiment was conducted with 4 cases,: no-rainfall, 1 em-height, 10 em-height and 20em-height of rainfall on the rooftop. According to the results of the height of stored rainfall, the average air temperature difference between the indoor and outdoor air with 1, 10 and 20 em-height of rainfall on the rooftop was $4.0^{\circ}C$, rooftop $1.2^{\circ}C$ and rooftop $1.0^{\circ}C$, respectively. The upper 10 em-height of rainfall on the rooftop acted to decrease the indoor air temperature on the top floor.

초음파(超音波) 탐상법(探傷法)에 의(依)한 용접부(熔接部)의 결함(缺陷)높이 측정(測定)에 관한 연구(硏究) (Consideration on the Experimental Measurement of Flaw Height of Welds by Ultrasonic Testing)

  • 안일영;임동규;한응교
    • 비파괴검사학회지
    • /
    • 제2권1호
    • /
    • pp.10-16
    • /
    • 1982
  • This study was carried out to measure the flaw height of welds in consideration of the effective probe angle in ultrasonic oblique detection. Specimens with inserted artificial flaws were made and flaw heights were estimated from detecting these specimens. Two different methods were applied to estimate flaw heights. From the result of the experiment, flaw height could be measured within the accuracy of 15% percent error and the difference between the probe distance method and beam path method is about 5% relatively small. It is considered that the results obtained this experimental study could be helpful informal ions for measuring flaw height.

  • PDF

경사면에서 참나무류 임분의 맹아 발생 및 생장 특성: 충청지역을 중심으로 (Characteristics of Occurrence and Growth for Oak Sprouts on the Slope: With Particular Focused on Chungcheong Region of South Korea)

  • 정상훈;이영근;이상태
    • 한국산림과학회지
    • /
    • 제107권4호
    • /
    • pp.336-343
    • /
    • 2018
  • 본 연구는 경사면에 분포하는 참나무류 임분의 성공적인 맹아갱신을 통한 후계림 조성 및 관리 기술 개발을 위해 수행되었다. 맹아갱신작업지의 1,451개 그루터기 높이 벌근경과 맹아발생 부위 수, 맹아 근원경 높이 등 맹아 발생과 생육에 관한 인자들을 조사하였다. 그루터기 벌근경이 커질수록 맹아발생량이 감소하거나 증가하였지만, 그루터기 높이에 따라 맹아발생량은 증가하는 경향을 보였다. 경사면 맹아갱신작업의 편의상 참나무류 임분은 사면상부 방향을 기준으로 낮게 벌채하기 때문에 사면상부와 하부 방향의 그루터기 높이차가 발생하는 것으로 파악되었다. 상대적으로 높이가 높은 사면하부 방향의 그루터기에서 맹아발생량이 많았으며, 사면하부 방향에서는 측면맹아, 사면상부 방향에서는 근부맹아 발생률이 높아 그루터기 높이차는 맹아가 발생하는 부위에 영향을 미치는 것으로 나타났다. 사면방향(상부 하부)에 따른 발생부위별 맹아 생장상태를 비교한 결과, 사면상부 방향에서는 생장량에 차이가 없는 반면 사면하부 방향에서는 측면맹아의 생장이 근부맹아 보다 높았다. 참나무류 맹아의 품질을 향상시키기 위해서는 경사면에 분포하는 참나무류 임분의 분포 특성을 고려하여 벌채면을 경사면과 평행하도록 그루터기 높이차를 줄여 측면맹아 발달을 억제하는 시업 적용이 필요하다.

Numerical study on the performance of semicircular and rectangular submerged breakwaters

  • Barzegar, Mohammad;Palaniappan, D.
    • Ocean Systems Engineering
    • /
    • 제10권2호
    • /
    • pp.201-226
    • /
    • 2020
  • A systematic numerical comparative study of the performance of semicircular and rectangular submerged breakwaters interacting with solitary waves is the basis of this paper. To accomplish this task, Nwogu's extended Boussinesq model equations are employed to simulate the interaction of the wave with breakwaters. The finite difference technique has been used to discretize the spatial terms while a fourth-order predictor-corrector method is employed for time discretization in our numerical model. The proposed computational scheme uses a staggered-grid system where the first-order spatial derivatives have been discretized with fourth-order accuracy. For validation purposes, five test cases are considered and numerical results have been successfully compared with the existing analytical and experimental results. The performances of the rectangular and semicircular breakwaters have been examined in terms of the wave reflection, transmission, and dissipation coefficients (RTD coefficients) denoted by KR, KT, KD. The latter coefficient KD emerges due to the non-energy conserving KR and KT. Our computational results and graphical illustrations show that the rectangular breakwater has higher reflection coefficients than semicircular breakwater for a fixed crest height, but as the wave height increases, the two reflection coefficients approach each other. un the other hand, the rectangular breakwater has larger dissipation coefficients compared to that of the semicircular breakwater and the difference between them increases as the height of the crest increases. However, the transmission coefficient for the semicircular breakwater is greater than that of the rectangular breakwater and the difference in their transmission coefficients increases with the crest height. Quantitatively, for rectangular breakwaters the reflection coefficients KR are 5-15% higher while the diffusion coefficients KD are 3-23% higher than that for the semicircular breakwaters, respectively. The transmission coefficients KT for rectangular breakwater shows the better performance up to 2.47% than that for the semicircular breakwaters. Based on our computational results, one may conclude that the rectangular breakwater has a better overall performance than the semicircular breakwater. Although the model equations are non-dissipative, the non-energy conserving transmission and reflection coefficients due to wave-breakwater interactions lead to dissipation type contribution.

전산화단층사진술을 이용한 상악동 체적의 측정 (Measurement of Maxillary Sinus Volume Using Computed Tomography)

  • 박창희;김기덕;박창서
    • Imaging Science in Dentistry
    • /
    • 제30권1호
    • /
    • pp.63-70
    • /
    • 2000
  • Purpose: To propose a standard value for the maxillary sinus volume of a normal Korean adult by measuring the width and height of the sinus and analyzing their correlation and the difference of the sinus size respectively between sexes, and on the right and left sides. Materials and Methods: Fifty-two (95 maxillary sinuses) out of 20 years or over aged patients who had taken CT in the Department of Dental Radiology, Yonsei University, Dental Hospital, between February 1997 and July 1999 who were no specific symptom, prominent bony septa, pathosis, clinical asymmetry and history of surgery in the maxillary sinus were retrospectively analyzed. Results: The mean transverse width, antero-posterior width, height and volume of the normal Korean adult's maxillary sinuses were 28.33 mm, 39.69 mm, 46.60 mm and 21.90 cm³, respectively. There was a significant sex difference in the sinus volume (p>0.05). In the mean antero-posterior width, height and volume of the sinus, no significant difference was observed between both sides. All four measurements showed a significant correlation between both sides (p>0.0001). The widths and height of the sinus all showed a significant correlation with the sinus volume (p>0.0001). Conclusion : In the Korean normal adult's maxillary sinus, males tended to be larger than females. Except for the transverse width, all of the measurements showed no significant difference between the right and left side, but significant correlations in the four measurements between both sides were observed. Thus, the overgrowth or undergrowth in the unilateral maxillary sinus may suggest a certain pathosis or developmental abnormalities in the maxillary sinus.

  • PDF

비선형(非線型) 대수차분(代數差分) 방정식(方程式)을 이용(利用)한 소나무 직경(直徑) 및 수고(樹高) 생장(生長) 추정(推定) (Estimating Diameter and Height Growth for Pinus densiflora S. et Z. Using Non-linear Algebraic Difference Equations)

  • 이상현
    • 한국산림과학회지
    • /
    • 제90권2호
    • /
    • pp.210-216
    • /
    • 2001
  • 우리나라에 전국적으로 분포하고 중요한 산림자원인 소나무(Pinus densiflora S. et Z.)의 직경 및 수고 생장함수를 유도하였다. 모형 유도방법은 두 측정간격 $T_1$$T_2$를 필요로 하는 대수 차분 방정식을 이용하였고, 데이터 이용의 극대화를 위하여 SAS에서 Lag와 Put 문장을 사용한 프로그램을 이용하여 모든 가능한 생장 측정 기간을 포함하는 데이터를 사용하였다. 적용된 동형 및 다형 차분 방정식 중 Schumacher 다형 방정식이 직경 생장을 추정하는데 적합한 것으로 나타났고, 수고 생장 추정은 Gompertz 다형식이 적합한 것으로 나타났다. 보다 정밀한 추정을 위해서는 이들 식에 생물학적인 변수들을 동반한 연구가 필요할 것으로 판단된다.

  • PDF

Radiologic Assessment of Subsidence in Stand-Alone Cervical Polyetheretherketone (PEEK) Cage

  • Ha, Sung-Kon;Park, Jung-Yul;Kim, Se-Hoon;Lim, Dong-Jun;Kim, Sang-Dae;Lee, Sang-Kook
    • Journal of Korean Neurosurgical Society
    • /
    • 제44권6호
    • /
    • pp.370-374
    • /
    • 2008
  • Objective : Aim of study was to find a proper method for assessing subsidence using a radiologic measurement following anterior cervical discectomy and fusion (ACDF) with stand-alone polyetheretherketone (PEEK), $Solis^{TM}$ cage. Methods : Forty-two patients who underwent ACDF with $Solis^{TM}$ cage were selected. With a minimum follow-up of 6 months, the retrospective investigation was conducted for 37 levels in 32 patients. Mean follow-up period was 18.9 months. Total intervertebral height (TIH) of two fused vertebral bodies was measured on digital radiographs with built-in software. Degree of subsidence (${\Delta}TIH$) was reflected by the difference between the immediate postoperative and follow-up TIH. Change of postoperative disc space height (CT-MR ${\Delta}TIH$) was reflected by the difference between TIH of the preoperative mid-sagittal 2D CT and that of the preoperative mid-sagittal T1-weighted MRI. Results : Compared to preoperative findings, postoperative disc height was increased in all cases and subsidence was observed only in 3 cases. For comparison of subsidence and non-subsidence group, TIH and CT-MR ${\Delta}TIH$ of each group were analyzed. There was no statistically significant difference in TIH and CT-MR ${\Delta}TIH$ between each group at 4 and 8 weeks, but a difference was observed at the last follow-up TIH (p=0.0497). Conclusion : ACDF with $Solis^{TM}$ cage was associated with relatively good radiologic long-term results. Fusion was achieved in 94.5% and subsidence occurred in 8.1% by the radiologic assessment. Statistical analysis reveals that the subsidence seen later than 8 weeks after surgery and the development of subsidence does not correlate statistically with the change of the postoperative disc space height.

임상에서 적용되는 목발과 이론적 적합성에 대한 비교 연구 (The Study of Compare to Clinical Applied versus Theoretical Fitness on Axillary Crutch)

  • 안덕현;김근조
    • 대한물리치료과학회지
    • /
    • 제3권4호
    • /
    • pp.113-120
    • /
    • 1996
  • The purpose of this study was to comparison clinical applied versus theoretical fitness on axillary crutch in human stance phase. Ideal crutch length is defined as the length of the crutch, including accessories, obtained during stance when the crutch tip is 15 cm(about 6inch) lateral and 15 cm(about 6 inch) anterior to the fifth toe and the axillary pad is 5 cm(about 2 inch) below the axillay fold. The participations(volunteers) were 71 inpatients(53 men and 18 women) who have orthopedic and neurological impairment on unilateral and/or bilateral lower extrimities, and mean age was 31.4 year old. Prior to participation, each subject informed the procedures of experiment from researcher and assistant researcher. This measured for axillary crutch using each of the following aspects : (1) length of actual using crutch, (2) length of axillary fold after modified(77% of actual height), (3) angle of elbow flexion after modified(77% of actual height). In order to determine the statistical significance of result, t-test were applied at the 0.05 level of significance. The result were as follows ; 1. There was significant difference between actual crutch and ideal crutch length(77% of actual height)(p<0.05). 2. There was significant difference of length of axillary fold between actual and ideal crutch (77% of actual height)(p<0.05). 3. There was significant difference of angle of elbow flexion between actual and ideal crutch(77% of actual height)(p<0.05).

  • PDF

임신기간 및 자궁저높이를 이용한 신생아 체중 예측 (Prediction of Newborn Birthweight by the Measurement of Fundal Height and Gestational Period)

  • 조문숙;박영숙
    • 모자간호학회지
    • /
    • 제1권
    • /
    • pp.34-44
    • /
    • 1991
  • The purposes of this study were to predict newborn birthweight by use of gestational period and fundal height and to identify growth curve of fundal height according to gestational period and growth curve of newborn birthweight according to fundal height. The subjects for the study were 802 women who delivered the normal newborn babies at Seoul National University Hospital from Sep. 1, 1981 to Aug.31, 1986. The data were collected bit chart review and analyzed nth SPSS program. The results of study were as follows : 1. The multiple regression equation ($R^2$=0.416) used for the prediction of newborn birthweight was y=(newborn birthweight, kg)=-4.421+0.075$x_1$(fundal height, cm)+0.053$x_2$(gestational period, weeks)+0.016$x_3$(abdominal girth, cm)+0.010$x_4$(maternal height, cm) 2. The growth curve of fundal height according to gestational period was obtained by polynomial regression. The regression equation was Y(fundal height, cm)=-36.78+18.58$log_ex$(gestational period, weeks) The growth curve of newborn birth weight according to fundal height was obtained by polynomial regression. The regression equation was Y(newborn birthweight, kg)=-8.09+3.27$log_ex$ (Fundal Height, cm) 3. In the following subgroups no significant difference was found in fundal height : engaged vs. nonengaged presentation, and nulliparous vs. multiparous women.

  • PDF

편마비 환자의 앉은 자세에서 일어서기 동작 시 의자 높이와 발의 조건이 생체역학적 요소에 미치는 영향 (The Effects of Chair Height and Foot Condition on the Biomechanical Factors in Sit-to-Stand Movement of Hemiplegic Patients)

  • 김동훈;김택훈;최흥식;노정석;최규환;김기송
    • 한국전문물리치료학회지
    • /
    • 제25권2호
    • /
    • pp.1-12
    • /
    • 2018
  • Background: It is very difficult for hemiplegic patients to effectively perform the sit-to-stand (STS) movements independently because of several factors. Moreover, the analysis of STS motion in hemiplegic patients has been thus far confined to only muscle strength evaluation with little information available on structural and environmental factors of varying chair height and foot conditions. Objects: This study aimed to analyze the change in biomechanical factors (ground reaction force, center of mass displacement, and the angle and moment of joints) of the joints in the lower extremities with varying chair height and foot conditions in hemiplegic patients while they performed the STS movements. Methods: Nine hemiplegic patients voluntarily participated in this study. Their STS movements was analyzed in a total of nine sessions (one set of three consecutive sessions) with varying chair height and foot conditions. The biomechanical factors of the joints in the lower extremities were measured during the movements. Ground reaction force was measured using a force plate; and the other abovementioned parameters were measured using an infra-red camera. Two-way repeated analysis of variance was performed to determine the changes in biomechanical factors in the lower extremities with varying chair height and foot conditions. Results: No interaction was found between chair height and foot conditions (p>.05). All measured variables with varying chair height showed a significant difference (p<.05). Maximum joint flexion angle, maximum joint moment, and the displacement of the center of mass in foot conditions showed a significant difference (p<.05); however the maximum ground reaction force did not show a significant difference (p>.05). Conclusion: The findings suggest that hemiplegic patients can more stably and efficiently perform the STS movement with increased chair height and while they are bare-foot.