• 한방재활의학과학회지
• /
• 제24권3호
• /
• pp.149-155
• /
• 2014

Objectives This study was designed to investigate the correlation between the difference of pelvic height and difference of gait balance. Methods 62 cases of patients who received treatment from January 2011 to March 2014 for abnormal postures were analyzed. Their difference of pelvic height were estimated by whole spine X-ray analysis and gait balance were estimated by Treadmill Gait Analysis system. The data were analyzed to find out correlation between difference of pelvic height and difference of gait balance, and correlation between the position of pelvic tilt and gait balance higher side. Pearson correlation and Chi-square analysis were used. Results Pelvic height heigher side were more left than right side, and gait balance higher side were also more left than right side. Difference of pelvic height and difference of gait balance had a positive linear relationship, but there was no significant correlation. The position of pelvic tilt had significant correlation with gait balance higher side. Conclusions The position of pelvic tilt had significant correlation with gait balance higher side and difference of pelvic height had no significant correlation with difference of gait balance.

• 치과방사선
• /
• 제23권2호
• /
• pp.315-322
• /
• 1993

To evaluate of the relationship between the TMJ disorder and the vertical mandibular asymmetry, the author analyzed the differences between condylar heights, ramus heights and mandibular heights of both sides. All measurements were performed with a digital micrometer on the panoramic radiographs of 36 TMJ disorder patients and 30 normal control group. The differences were expressed in millimeters and percentage using the following formula; ｜(R-L)/(R+L)｜×100% The results were as follows : 1. The condylar height difference was greater of in patient group (1.86±1.66㎜) than that of in control group (1.22±0.85㎜)(p<0.05). But there was no significant difference in the condylar height ratio difference between patient group (11.67㎜11.44%) and control group (7.64±621%) (p>0.05). 2. The ramus height difference and ramus height ratio difference of patient group (4.52±3.70㎜, 4.39±3.49%) were greater than those of control group (2.64±2.13㎜, 2.46±2.02%)(p<0.05, p<0.01). 3. The mandibular height difference and mandibular height ratio difference of patient group (4.32±3.52㎜, 3.59±2.81%) were greater than those of control group (2.57±2.46㎜, 2.01±1.95%) (p<0.05). 4. The ratio difference in condylar height to ramus height and condylar height to mandibular height of patient group (5.01±4.13%, 3.36±2.88%) were greater than those of control group (2.33±1.78%, 1.90±1.40%) (p<0.01).

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.31-38
• /
• 2006

The purpose of this study was to investigate the effect of changing the steps height on the joint moment of lower extremity in stair-descent activity of elderly persons. Data were collected by 3-D cinematography and force platform. 9 male elderly subjects in the 60s and 70s participated in this study. All subjects performed a stair-descent in four different heights of stairs (10, 14, 18, 22cm) having 5 step staircase. The results were as follows. 1. For the step height of 22cm the maximum. plantarflexion moment was the smallest and the largest for the step height of 14cm. 2. There was not a statistical difference shown for the extension moment of the knee joint for the different height of steps. 3. There was not a statistical difference shown for the flexion moment of the hip joint for the varying height of steps but on average for the 18cm step this increased rapidly. 4. The smallest maximum. value for inversion moment was revealed for the step height of 10cm and this increased significantly for the step height of 22cm. 5. The smallest maximum. value for abduction moment of the hip joint was revealed for the step height of 10cm and this increased significantly for the step height of 22cm. 6. There was no significant difference shown for the maximum. abduction moment for the hip joint. The main conclusion is that there is a huge difference in the moment of the lower extremities for the elderly while walking down a stairs with a step height above 18 cm and that this moment increased or decreased rapidly under a condition of step height being 22cm. With the results from this research and related research of elderly walking upstairs it can be shown that the step height has a large role in the safety for the elderly.

• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.317-325
• /
• 2010

Purpose: The aim of this study is to make some basic materials to find retention force difference based on the total height of CAD/CAM zirconia abutment used for implant, retention force difference based on how to regulate the height of the abutment, retention force difference based on the size and retention force difference based on the design group. Methods: The retention force was measured by being pulled at the speed of 1mm/min after being combined with zirconia block and abutment using Temp-BOND of Kerr. The experiment was done at the research lab of OSTEM in Busan by useing UNIVERSAL TESTING MACHINE on March 3rd, 2010. Results: After analysing the total height and the retention force, p-value had minor difference by 0.01 statistically. Namely, 3mm, 4mm, 5mm had the retention force difference and we could see retention force difference on 3mm and 5mm at the post test. After analyzing how to regulate the height and retention force, p-value had minor difference by 0.000 statistically. Namely, 1mm and 2mm had the retention difference and we could see that 1mm and 2mm with the total height had retention difference. After analyzing the retention force based on the size, p-value had minor retention force difference by 0.000 statistically. Namely, 7 different size had retention force difference and we could see the size 21.9mm, 32.9mm, 32.9mm, 38.4mm, 48.9mm and 54.9mm had retention force difference. Conclusion: Namely 9 different design group had retention difference and we could see that 9 design group with 5.6.7.8 design group and 9 design group with 1.2.3.4. design group had retention force.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.88-93
• /
• 2000

In this study, the mixing process of two-phase flow generated by two jets with height difference is analyzed. The primary jet is jetted on the condition of the state mixed pulverized solid particles with air. The height difference between the main jet and the secondary jet is changed into three kinds(0, 32.5, 47.5mm). The velocity vector field, concentration field and turbulent properties of solid particles are measured by using 3-Dimensional Particles Dynamics Analyzer. As the height difference of two jets through the two nozzles increases, the solid particle recirculation zone and the dense zone in the combustion chamber become large. The solid particle concentration at the center of the combustion chamber gets dense because the particle velocity remains slow due to the existence of the solid particle recirculation zone. The particle concentration in the combustion chamber can also be influenced by the hight difference of two jets.

• 대한물리의학회지
• /
• 제6권2호
• /
• pp.199-205
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of 0cm, 2.5cm, 5cm height increase elevator shoes insole on gait and foot pressure Methods: Fifteen young adult were recruited this study. Gait and foot was measured by Gait AnalyzerTM(Tech Storm Inc. korea). Statistical analysis was used one-way ANOVA to know difference between 0cm, 2.5cm insole and 5cm insole Results: There was no significantly difference on foot length, foot width, foot angle, step time during gait. But step length and step width was significantly difference during gait. There was no significantly difference on gait ratio during stance phase. There was significantly difference on forefoot pressure and rearfoot pressure ratio. Conclusion: These results indicate that height increase elevator shoes insole may be caused step length, step width decreaseed during gait. It caused forefoot pressure increased and rearfoot pressure decreased on foot.

• 동의신경정신과학회지
• /
• 제13권2호
• /
• pp.93-100
• /
• 2002

Objects and Methods : BDl, STAI and Self-Esteem scale were completed by 28 female subjects who composed of nurses of Kyung Hee Medical Center and students of Kyung Hee Oriental Medical college. At the same time, current weight, height and BMI(Body Mass Index), ideal weight, height and BMI, the difference of current weight and ideal weight, the difference of current height and ideal height, and the difference of current BMI and ideal BMI were measured. Result : 1. There was a significant difference between obese and normal weight group in the difference between the current weight and the ideal weight. The difference of the obese group were higher than the normal weight group. 2. There was a significant difference between obese and normal weight group in the mean BDI score. The mean BDI score of the obese group were higher than that of the normal weight group. 3. There was no significant difference between obese and normal weight group in the mean STAI score. 4. There was no significant difference between obese and normal weight group in the mean Self-Esteem Scale score. Conclusion : There are a tendency; the more weight, the more depression in women.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.30-36
• /
• 2018

Since the freezer compartment and the refrigerating compartment are located side by side in a side-by-side refrigerator, the problems of the door height difference (DHD) and door flatness difference (DFD) have been constantly raised. Deformation of the cabinet of a built-in side-by-side refrigerator under food and thermal loads was analyzed by the finite element software ANSYS. The DHD and DFD, occurring due to the deformation of the cabinet, evaluated. From the results of the analysis of the cabinet, the 3D CAD software CATIA was used to geometrically translate and rotate the freezing and refrigerating compartment doors, in consideration of the displacement of the hinge fastening point. Then, the coordinates of two points on the upper corner of the doors were determined, and the DHD and DFD were obtained. It found that the thermal load, occurring under normal operation conditions, decreases the door height difference, but increases the door flatness difference. Values of the analyzed DHD and DFD appear smaller than the acceptance criteria used by the refrigerator manufacturer.

• 한방재활의학과학회지
• /
• 제23권3호
• /
• pp.79-85
• /
• 2013

Objectives The aim of this study was to investigate pelvic insufficiency and its correlation with lumbago side. Methods 72 cases of patients who received treatment from March 2010 to February 2013 for lumbago were analyzed. Their pelvic insufficiency parameters were estimated by x-ray analysis and lumbago sides were considered. The data were analyzed to find out correlation of pelvic insufficiency parameters and correlation between parameters and lumbago sides. Pearson correlation and two-by-k cross tabulation analysis were used. Results 1) Iliac height difference had significant correlation with femur height difference and the result was alike previous studies' results. 2) Femur height difference and iliac height difference had no significant correlation with iliac width difference. 3) Posterior rotation malposition ilium side and inflare side had no significant correlation with lumbago side. Conclusions Iliac height difference had significant correlation with femur height difference and sides of pelvic insufficiency had no significant correlation with lumbago sides.

• 복식문화연구
• /
• 제3권2호
• /
• pp.293-306
• /
• 1995

The purpose of this study is to analysis children's measurement and to provide the fundamental information for he clothing design which can reflect the characteristic of their bodies. An anthropometric database used for this study was the 1992 national anthropomatric survey of Koreans. The results obtained are as follows; (1) Children showed the significant difference of their growth in accordance with the increase of their ages. There were also the difference between body and girls. Height, length of items grew most promthy. For example; boys from 10 to 11 and girls from 10 to 11 again their height mostly. (2) In character of body proportion, significant difference were found in accordance with their ages and sex. However, in the items of height, length noticeable changes of proportion could not be found because there were hardly any actual difference of size means while girth items appeared differently. (3) There were significant factors from the result of factor analysis of body dimension. The fist factor ; grith, depth, breath. The second factor ; height, length. (4) We can class three groups with the results of cluster analysis of body dimension.