• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.500-503
• /
• 2006

To adjust the discrepancy between Light Detection and Ranging (LIDAR) strips, previous researches generally have been conducted using conjugate features, which are called feature-based approaches. However, irrespective of the type of features used, the adjustment process relies upon the existence of suitable conjugate features within the overlapping area and the ability of employed methods to detect and extract the features. These limitations make the process complex and sometimes limit the applicability of developed methodologies because of a lack of suitable features in overlapping areas. To address these drawbacks, this paper presents a methodology using area-based algorithms. This approach is based on the scheme that discrepancies make complex the local height variations of LIDAR data whithin overlapping area. This scheme can be helpful to determine an appropriate transformation for adjustment in the way that minimizes the geographical complexity. During the process, the contour tree (CT) was used to represent the geological characteristics of LIDAR points in overlapping area and the Iterative Closest Points (ICP) algorithm was applied to automatically determine parameters of transformation. After transformation, discrepancies were measured again and the results were evaluated statistically. This research provides a robust methodology without restrictions involved in methods that employ conjugate features. Our method also makes the overall adjustment process generally applicable and automated.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.452-455
• /
• 2007

3D stereoscopic viewing of large scale imagery, such as aerial photography and satellite images, needs different parallaxes relative to the display scale. For example, when a viewer sees a stereoscopic image of aerial photography, the optimal parallax of its zoom-in image should be smaller than that of its zoom-out. Therefore, relative parallax adjustment according to the display scale is required. Merely adjusting the spacing between stereo images is not appropriate because the depths of the whole image are either exaggerated or reduced entirely. This paper focuses on the improving stereoscopic viewing with a single remote sensing image and a digital surface model (DSM). We present the parallax adjustment technique to maximize the 3D realistic effect and the visual comfort. For remote sensing data, DSM height value can be regarded as disparity. There are two possible kinds of methods to adjust the relative parallax with a single image performance. One is the DSM compression technique: the other is an adjustment of the distance between the original image and its stereo-mate. In our approach, we carried out a test to evaluate the optimal distance between a single remote sensing image and its stereo-mate, relative to the viewing scale. Several synthetic stereo-mates according to certain viewing scale were created using a parallel projection model and their anaglyphs were estimated visually. The occlusion of the synthetic stereo-mate was restored by the inpainting method using the fields of experts (FoE) model. With the experiments using QuickBird imagery, we could obtain stereoscopic images with optimized parallax at varied display scales.

• 한국산학기술학회논문지
• /
• 제18권9호
• /
• pp.347-355
• /
• 2017

본 연구의 목적은 골반 교정이 중년 여성의 만성 요통과 척추 골반 지표들에 미치는 영향을 규명하는데 있다. 이를 위하여 만성 요통이 있는 중년 여성 38명을 실험군(20명)과 무처치 대조군(18명)에 무선 할당하여 실험군에게는 골반 교정을 주 4회, 8주 간 시술하였다. 시술 전과 8주 후에 요통은 시각적 상사 척도와 Oswestry 요통 장애 지수로 측정하였고, 그 외 요부 유연성, 염증인자인 혈중 C-reactive protein (CRP) 및 척추 골반 지표들을 평가하였다. 처치 8주 후 대조군에 비하여 골반 교정군에서 요통 강도, 요통 장애 지수 및 요부 유연성 모두가 유의하게 향상되었으며, 혈중 CRP의 유의한 변화는 없었다. 척추 골반 지표들을 분석한 결과 골반 교정군에서 대조군에 비해 요추전만각, 천골경사 및 골반균형지표는 유의하게 변화된 반면, 골반입사각의 변화가 뚜렷하지 않았다. 따라서 골반 교정은 요통 환자의 통증 경감과 기능 향상에 효과적일 것이며, 척추 골반 정렬의 변화의 결과일 것이다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.3-6
• /
• 2007

The GPS baseline processing and the network adjustment was required a preliminary classification and check for effective work because the observation data of GPS $3^{rd}$ order control points are enormous attain to about 12,000 points. Particularly, in baseline processing and network adjustment a inaccuracy GPS antenna heights and point names yield a gross error or a S/W computation error. For the baseline processing of observation data, the related all materials were collected and were required a final check. The factor occurring a error, in GPS the baseline processing, were inspected variously after a checking observation data. Also, baseline processing method of GPS $3^{rd}$ order control points were commented and the analysis carry out a results with a experiment. The ellipsoidal distance and height of duplication baseline was compared between adjoin campaign areas for a accuracy analysis of baseline processing. According to the result, the mean is about 1cm for horizontal direction and about 2cm for vertical direction.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
• /
• pp.255-256
• /
• 2007

컨테이너터미널의 장치장으로 반입되는 컨테이너의 위치가 잘못될 경우 컨테이너 적하 작업 시 재취급 발생과 크레인 이동 시간 증가로 인해 작업 시간이 지연될 수 있다. 최적의 장치 위치를 결정하기 위해서는 크레인 간섭, 컨테이너 그를, 적재단수 등 여러 가지 요소를 고려해야 하고, 이 요소들의 중요도를 반영하는 가중치를 결정해야 한다. 본 연구에서는 온라인 탐색을 바탕으로 장치 위치 결정 요소에 대한 가중치를 동적으로 조정하는 온라인 탐색 알고리즘을 제안한다.

• 제어로봇시스템학회논문지
• /
• 제9권2호
• /
• pp.152-158
• /
• 2003

A machine-vision guided inspection system with go-no gauges for inspecting eggcrate assemblies in steam generators is considered. To locate the gauge at the right place, periodic corrective actions for its position and traveling direction are required. We present a machine vision algorithm for determining inserting position and traveling direction of the go-no gauge. The overall procedure of the algorithm is composed of camera calibration, eggcrate image preprocessing, grid-height adjustment, intersection point estimation between two intersecting grids, and adjustment of position and traveling direction of the gauge. The intersection point estimation is performed by using linear regression with a constraint. A test with a real eggcrate specimen shows the feasibility of the algorithm.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.79-87
• /
• 2004

The light pattern reflected from a machined surface contains some information like roughness and profile on the projected surface as expected in the Beckmann-Spizzichino model. In applying the theory into a real reliable measuring device, many parameters such as incident light power, wave length, spot size should be kept a constant optical value. However, the reflected light power is likely to change with the environmental noise, the variations of the light source, the reflectivity of the surface, etc. even though the incident light power is constant. In this study, a method for adjusting the incident light power to keep the reflected light power projected on a CMOS image sensor constant was proposed and a simple adjustment algorithm based on PI digital control was examined. Experiments verified that the proposed method made the surface roughness measurement better and more reliable even under variations of the height of light source.

• Wind and Structures
• /
• 제17권4호
• /
• pp.419-433
• /
• 2013

This paper investigates the vertical profiles of horizontal mean wind speed and direction based on the synchronized measurements from a Doppler radar profiler and an anemometer during 16 tropical cyclones at a coastal site in Hong Kong. The speed profiles with both open sea and hilly exposures were found to follow the log-law below a height of 500 m. Above this height, there was an additional wind speed shear in the profile for hilly upwind terrain. The fitting parameters with both the power-law and the log-law varied with wind strength. The direction profiles were also sensitive to local terrain setups and surrounding topographic features. For a uniform open sea terrain, wind direction veered logarithmically with height from the surface level up to the free atmospheric altitude of about 1200 m. The accumulated veering angle within the whole boundary layer was observed to be $30^{\circ}$. Mean wind direction under other terrain conditions also increased logarithmically with height above 500 m with a trend of rougher exposures corresponding to lager veering angles. A number of empirical parameters for engineering applications were presented, including the speed adjustment factors, power exponents of speed profiles, and veering angle, etc. The objective of this study aims to provide useful information on boundary layer wind characteristics for wind-resistant design of high-rise structures in coastal areas.

• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.135-144
• /
• 2016

분기기 거더 경량화는 제작비 감소 및 제작의 용이함을 위해 필수적이다. 자기부상열차용 3방향 분기기 경량화를 위한 설계변수는 부상안정성과 관련 있기 때문에 신중히 결정되어야 한다. 도시형 자기부상열차는 대차가 레일을 감싸는 구조로 되어 있기 때문에 거더 높이 변경을 통해서 경량화가 가능하다. 실제 테스트베드에서 반복 주행시험을 통해 안정성을 확보해야 하지만 공간적, 비용적 제한에 의해 여러 거더 높이의 테스트베드 제작은 불가능하며 이를 보완하기 위한 설계 파라미터 연구는 필수적이다. 본 논문에서는 자기부상열차 주행 시 3방향 분기기 경량화에 따른 부상안정성을 고려한 설계 파라미터 연구에 그 목적이 있다. 이를 위해 분기기 거더 높이 변경을 통해 경량화하였고 모달 중첩법을 이용하여 유연체로 모델링 하였다. 유연체 분기기와 자기부상열차 동역학 모델과의 연동해석을 통해 차량의 통과속도, 횡 공극, 부상 공극을 비교하고 부상안정성에 미치는 영향을 분석하였다. 이를 통해 거더높이와 부상안정성과의 상관관계에 대해 분석하였다. 본 논문의 연구 결과는 자기부상열차용 분기기 설계에 활용 가능할 것이다.

• Korean Journal of Radiology
• /
• 제24권7호
• /
• pp.681-689
• /
• 2023

Objective: Three-dimensional rotational angiography (3D-RA) is increasingly used for the evaluation of intracranial aneurysms (IAs); however, radiation exposure to the lens is a concern. We investigated the effect of head off-centering by adjusting table height on the lens dose during 3D-RA and its feasibility in patient examination. Materials and Methods: The effect of head off-centering during 3D-RA on the lens radiation dose at various table heights was investigated using a RANDO head phantom (Alderson Research Labs). We prospectively enrolled 20 patients (58.0 ± 9.4 years) with IAs who were scheduled to undergo bilateral 3D-RA. In all patients' 3D-RA, the lens dose-reduction protocol involving elevation of the examination table was applied to one internal carotid artery, and the conventional protocol was applied to the other. The lens dose was measured using photoluminescent glass dosimeters (GD-352M, AGC Techno Glass Co., LTD), and radiation dose metrics were compared between the two protocols. Image quality was quantitatively analyzed using source images for image noise, signal-to-noise ratio, and contrast-to-noise ratio. Additionally, three reviewers qualitatively assessed the image quality using a five-point Likert scale. Results: The phantom study showed that the lens dose was reduced by an average of 38% per 1 cm increase in table height. In the patient study, the dose-reduction protocol (elevating the table height by an average of 2.3 cm) led to an 83% reduction in the median dose from 4.65 mGy to 0.79 mGy (P < 0.001). There were no significant differences between dose-reduction and conventional protocols in the kerma area product (7.34 vs. 7.40 Gy·cm², P = 0.892), air kerma (75.7 vs. 75.1 mGy, P = 0.872), and image quality. Conclusion: The lens radiation dose was significantly affected by table height adjustment during 3D-RA. Intentional head off-centering by elevation of the table is a simple and effective way to reduce the lens dose in clinical practice.