• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.98-103
• /
• 2004

Diesel engine offers superior fuel consumption than gasoline engine of equivalent capacity. For this reason, diesel engines are widely used in heavy duty transport applications. Specially, it has been many years that exhaust gases from gasoline automobile rather than from diesel is the major object concerned by Korea and other countries, and it is strongly required on the reduction techniques on harmful NOx, Soot, CO, He. Thus, this paper focused on the emission reduction and target for this paper is heavy-duty diesel engine equipped with power filter such as wet type air cleaner. In this paper, the performance, exhaust emissions(CO, THC, NOx, Soot) and noise of heavy-duty diesel engine were measured at maximum load condition and the range of 1,000∼2,200rpm. The smoke was measured at FAS(Free Accel Smoke) test mode.

• 한국연초학회지
• /
• 제21권2호
• /
• pp.128-135
• /
• 1999

This study was conducted to determine the sidestream smoke concentration, nicotine, tar, and CO, by the characteristics of tobacco leaves and their combinations. 20 kinds of tobacco leaves and 15 types of their combinations were selected for this study. After collecting the sidestream smoke by fishtail chimney, the concentrations of nicotine, tar, and CO in sidestream smoke were analyzed. Variation in nicotine concentration of sidestream smoke among tobacco leaves and their combinations was as much as 9-times. Heavy leaves and burley leaves were higher in nicotine concentration than light leaves and flue-cured leaves, respectively, the reconstituted tobacco leaf had the minimum concentration of nicotine. Tar concentration of sidestream smoke also was changed by the characteristics of tobacco leaves and their combinations. As the american C4F had the maximum concentration of tar in sidestream smoke, the reconstituted tobacco leaf showed the minimum concentration. Blending 50 % flue-cured B1-0 plus 50% burley B1-T grade showed the highest value in the nicotine concentration. Also, in case of adding B3K and izmir tobacco leaves, the nicotine concentration was decreased. The tar concentration in the sidestream smoke increased as increasing the amount of flue-cured heavy leaf. The CO concentration was not so much Changed by the characteristics of tobacco leaves and their combinations.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.1-10
• /
• 2009

The characteristics of smoke emissions from diesel heavy duty vehicles which weigh over 5.5 tons was investigated by driving the vehicles with both the Lugdown 3 modes in the chassis dynamometer and tree accelerating mode under no load. The vehicles include commercial vehicles such as bus, microbus, trucks and specialized vehicles, etc. The total numbers of the vehicles tested were 200. The light extinction method was used to measure the smoke emissions from the vehicles tail pipe. The values of the smoke emissions in the tree accelerating mode showed $0{\sim}20%$ band nearly independent of both the mileage and year of production of the tested vehicles, while those in the Lugdown 3 modes showed $0{\sim}99%$ of wide band. The correlation coefficients between the values of the smoke emissions with both the Lugdown 3 modes and the free acceleration mode were 0.12, 0.08, 0.12, respectively. The inspection with Lugdown 3 modes is better one than that with tree acceleration from the point of exact inspection of the diesel vehicles' smoke emission.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1722-1728
• /
• 2002

Most researches regarding emulsified fuel were in the areas of emulsifier, emulsified fuel manufacturing and emulsified fuel droplet combustion, but there were little papers published regarding emulsified fuel combustion and boiler efficiency in an industrial boiler. The main purpose of this study is to clarify whether improvements in the boiler efficiency and the reduction of pollutants such as CO, NOx, SOx and smoke exist or not when emulsified fuels are combusted in the commercial boiler. Main experimental parameters were water content in heavy oil , excess $O_2$, and boiler load. The fuels used in this experiment were 0.5 B-C, and 5 kinds of 0.5 B-C/water emulsified fuels. The combustion characteristics of heavy oil and its emulsions with water were investigated in an industrial boiler. The combustion stability was monitored and exhaust gases such as CO, NOx, SOx and smoke were measured with excess $O_2$ and combustion load. In case of emulsified fuel combustion, flame stability was poor and boiler efficiency was lowered by 1.6~5.7%, but emission levels of CO and smoke were improved.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2009년도 춘계학술논문발표회 논문집
• /
• pp.110-119
• /
• 2009

A fire should be accompanied by the heat and smoke. However, smoke is considered main cause of heavy casualties. Smoke easily spreads away from the fire area to remote space and cause mortal wound for the resident. A technical way effectively protecting the life and property from the smoke is the smoke control system of the building. Pressurized air supply system can be considered to prevent the refuge area from the smoke infiltration that evacuate residents via evacuation route for life safety. This paper is related with performance estimation and the effectiveness of the pressurized air supply system through experiments.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.865-870
• /
• 2008

대형디젤 기관에서 매연배기가스에 대한 배기가스 재순환장치의 영향을 KIVA-3V 전산유체해석코드를 통해서 수치 해석적으로 연구했다. 지배방정식으로 RNG k-$\varepsilon$ 난류 모델을 이용했고, 무화, 벽 침투 그리고 매연 등의 물리적인 현상을 나타내기 위해서 TAB, Wave, Watkins-Park, Nagle-Strickland 모델이 적용되었다.

• 한국산학기술학회논문지
• /
• 제20권10호
• /
• pp.33-39
• /
• 2019

대형 디젤 엔진에서 NOx, Smoke 등의 배기가스 저감과 연비를 개선하는 것은 주요한 개발 목표이다. 이 목표를 달성하기 위한 다양한 방식 중 연료를 분할하여 분사하는 다단 분사 전략은 주요하게 적용되고 있다. 본 연구에서는 다양한 조건의 다단분사 전략을 적용하여 배기가스, 연비 그리고 연소 소음 관점에서 최적의 성능을 확보할 수 있는 조건을 확인하여 개선정도를 확인하고자 하였다. 1단 파일럿 적용 시, 단일 분사 대비 NOx 저감이 가능한 영역이 있으나, Smoke가 악화되는 문제가 확인되었다. 2단 파일럿 적용 시, 최대 NOx와 Smoke를 각각 73%, 84%까지 저감할 수 있었다. 연소 소음은 최대 압력 상승률 분석을 통해, 또한 연료소비율은 도시 연료 소비율을 계산하여 단일 분사와 비교하여 개선수준을 평가하였다. 이를 통해 15%:15% 2단 파일럿 전략 적용 시, 단일 분사 대비 NOx 32.9%, Smoke 60.4%, 연비 1.95%, 연소소음 19.3%의 개선을 이룰 수 있음을 확인하였다. 향후, 본 연구 결과를 기반으로 운전 영역을 확장하여 각 조건에서의 최적 연료 분사 방식 도출을 통해 전체적인 성능개선을 구현하고자 한다.

• 한국연초학회지
• /
• 제30권1호
• /
• pp.25-32
• /
• 2008

In this study, we compared three different pretreatment methods, such as block digestion, microwave digestion and solvent injection, coupled with Octopole Reaction System(ORS)-ICP-MS was used for the quantification of heavy metals in mainstream smoke of 2R4F reference cigarette, and then evaluated those efficiencies in the recovery, repeatability and reproducibility. In all methods, volatile heavy metals, As, showed the highest CV value, and Cd showed the lowest one. However, the solvent injection method showed the most stable recovery rate and CV value of 2.36 %. This method showed also advantages in time-consuming and compatibility with ICP-MS system. This results demonstrate that solvent injection method can be recommended as a superior pretreatment procedure to be able to reduce contaminants and spectral interference as well as loss of the elements interested.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.244-249
• /
• 2004

Experiments were performed to investigate the characteristics of combustion of 7MW-3 air stages combustion system for a heavy oil firing boiler. Several fuel nozzles were developed for the purpose of lowering pollutions in another institute and ${\Phi}$-jet nozzle among them was equipped to the combustion system. A variety of combustion phenomena were observed as air stage ratio, air fuel ratio and load are changed for each nozzle. Main combustion characteristics are shape of flame, NOx and CO generations, smoke scale number. Through lots of adjustments, the combustion system reaches such goals as the low NOx of 160 ppm, CO of 300 ppm corrected at $O_2$ of 4% and dust of 150 mg/Sm3.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.34-41
• /
• 2000

The purpose of this research was to investigate the effects of exhaust gas recirculation(EGR) with diesel particulate filter(DPF) on heavy duty diesel engine. The exhaust gas was recirculated to the intake manifold after the smoke was eliminated in the DPF, The major conclusions of this research are i)at each engine speed EGR ratio was able to 60% maximum ii) the amount of NOx emissions was decreased to 90% at high engine load and to more than 60% at low engine load and iii) the amout of NOx emissions was increased to five times according to the increase of engine load but the effect of EGR is more effective at high engine load.