• Title/Summary/Keyword: Heavy Metal Compounds

Search Result 133, Processing Time 0.025 seconds

Prediction of Daphnia magna LC50 on Heavy Metal Containing Samples

  • Ahn, Bok-Kyoun;;Ahn, Sang-Jin;Kim, Geon-Heung
    • Korean Journal of Hydrosciences
    • /
    • v.2
    • /
    • pp.61-68
    • /
    • 1991
  • This study assessed the contribution of heavy metals to total toxicity as well as the presence other toxic compounds before and after adding the chemical P to concurrently conducted bioassay tests of Daphnia magna and P. Phosphoreum. The following conclusions were drawn from this study : With excessive EDTA dosage, a toxicity reduction in Microtox would occur due to a metal-comples being formed. Microtox was far less sensitive than D. magna to heavy metal toxicity, but extended exposure time and reagent could increase the sensitivity.

  • PDF

Impact of Dissolved Wastewater Constituents on Laccase-Catalyzed Treatment of Bisphenol A

  • Kim, Young-Jin
    • Journal of Environmental Health Sciences
    • /
    • v.30 no.2
    • /
    • pp.161-166
    • /
    • 2004
  • The impact of dissolved wastewater constituents on the treatment of synthetic bisphenol A (BPA) solutions was investigated under a variety of reaction conditions. The laccase enzyme from Trametes vesicolor was used for the BPA treatment. The constituents studied included various inorganic salts, organic compounds and heavy metal ions. BPA degradation was inhibited by sulfate, thiosulfate, sulfide, nitrite, and cyanide ions at 25 mg/$\ell$, 100mg/$\ell$, 25 mg/$\ell$ 150 mg/$\ell$, and 2.5 mg/$\ell$, respectively. However, the inhibitive effects of sulfide and sulfite on BPA degradation were diminished by additional aeration to oxidize them. Formaldehyde significantly reduced the rate of BPA degradation at 1.0% among organic compounds studied. Among heavy metal ions tested, Fe(II) substantially suppressed BPA removal at 1 mM. MgCl$_2$ and CaCl$_2$ exhibited great inhibition of BPA degradation at 25mM.

Measurement of Airborne Particles and Volatile Organic Compounds Produced During the Heat Treatment Process in Manufacturing Welding Materials

  • Myoungho Lee;Sungyo Jung;Geonho Do;Yeram Yang;Jongsu Kim;Chungsik Yoon
    • Safety and Health at Work
    • /
    • v.14 no.2
    • /
    • pp.215-221
    • /
    • 2023
  • Background: There is little information about the airborne hazardous agents released during the heat treatment when manufacturing a welding material. This study aimed to evaluate the airborne hazardous agents generated at welding material manufacturing sites through area sampling. Methods: concentration of airborne particles was measured using a scanning mobility particle sizer and optical particle sizer. Total suspended particles (TSP) and respirable dust samples were collected on polyvinyl chloride filters and weighed to measure the mass concentrations. Volatile organic compounds and heavy metals were analyzed using a gas chromatography mass spectrometer and inductively coupled plasma mass spectrometer, respectively. Results: The average mass concentration of TSP was 683.1±677.4 ㎍/m3, with respirable dust accounting for 38.6% of the TSP. The average concentration of the airborne particles less than 10 ㎛ in diameter was 11.2-22.8×104 particles/cm3, and the average number of the particles with a diameter of 10-100 nm was approximately 78-86% of the total measured particles (<10 ㎛). In the case of volatile organic compounds, the heat treatment process concentration was significantly higher (p < 0.05) during combustion than during cooling. The airborne heavy metal concentrations differed depending on the materials used for heat treatment. The content of heavy metals in the airborne particles was approximately 32.6%. Conclusions: Nanoparticle exposure increased as the number of particles in the air around the heat treatment process increases, and the ratio of heavy metals in dust generated after the heat treatment process is high, which may adversely affect workers' health.

Treatment Characteristics of Plating Wastewater Containing Freecyanide, Cyanide Complexes and Heavy Metals (II) - Effect of Aldehyde Compounds and Polysulfide - (도금폐수내 유리시안과 착염시안 및 중금속의 처리특성 (II) - aldehyde와 polysulfide첨가에 따른 영향 -)

  • Jung, Yeon-Hoon;Lee, Soo-Koo
    • Journal of Korean Society on Water Environment
    • /
    • v.26 no.4
    • /
    • pp.687-690
    • /
    • 2010
  • The objective of this study is to investigate the effect of aldehyde compounds and ploysulfide as accelerating agents on removal of heavy metals and CN in plating wastewater. As a results of the experiments, the removal efficiency of cyanide using the formaldehyde type of aldehydes was the highest at pH 9. Next types were sodium formaldehyde bisulfite addut> paraldehyde> paraformaldehyde. Also, optimum pH and dosage for treating the residual heavy metals by using polysulfide were pH 9 and 30 mg/L, respectively. The removal efficiencies of cyanide, chromium, zinc and copper were above 96.7% at optimum condition.

A Study on the Reduction of Particulate Emission Using Oil Soluble Organometallic Compounds as Combustion Improver for Heavy Fuel Oil (중질유 연소시 유용성 유기금속화합물 연소촉진제의 Dust 저감특성)

  • Kim, Dong-Chan;Nho, Nam-Sun;Woo, Je-Kyung;Kim, Jin-Hoon;Lee, Young-Sea
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.24 no.1
    • /
    • pp.55-62
    • /
    • 2008
  • This study is aimed at substantially reducing the particulate matter (dust) emission during the combustion of heavy fuel in boilers by addition of combustion improver. The combustion improver used were the oil-soluble organometallic compounds that were found to be more effective than the dispersing agents that are generally used for reducing the particulate emission. The dust reduction effect was found to depend on the active materials (metals) as well as on the organic ligand part of organometallic compounds. Acetylacetonoate and naphthenate of Fe and Ca were found to be most effective for dust reduction. Addition of Fe and Ca organometallic compounds as combustion improver in concentration of 30 ppm (metal basis) to heavy fuel oil, caused dust reduction by 50 wt% to 80 wt%.

Analysis and Characteristics of Heavy Metals in Mines Waste Water (광산폐수 속의 중금속의 분석과 특성)

  • Lee, Kyung-Ho
    • Journal of the Speleological Society of Korea
    • /
    • no.92
    • /
    • pp.9-18
    • /
    • 2009
  • A number of closed metal mines act as point sources of contamination on nearby streams, soils and plants in our country. The contamination of twelve decomposed samples had earned from nine closed metal mines had been evaluated by TEA-3000. The contents of heavy metal with ion fraction exchange and carbonate fraction forms had been showed that the speciation of heavy metals represented with easy solubility, mobility and bioavailable of plants, and in case of sulfide compounds and organic residuals forms are related with the speciation of metals which may be stable forms because of strong bindable capacity. Also heavy metals elements in mosts of mines got with relative stable within crystal lattice, but results of trace element analyser showed that, in the most of tailings from mine areas, large portions of concentration of heavy metals were explained as stable from, sulfides/ organics and residual. In tailing from Imchun mines, the concentrations extracted by water were relatively high as compared with other mine areas whose total concentrations were very high because of large quantities of exchangeable ions and carbonates and low soil pH. Danger Index (D.I.) suggested in this study was based on the cumulative concentrations of step 1 and 2 from the result of trace element analyser. When the soil pH was considered, this index became better indicator to determine the priority for the remediation of mine area.

A study on the distribution of organic compounds, nitrogen, phosphorus and heavy metal in Ballast Water (밸러스트수내 유기물, 영양염류 및 중금속 농도 분포에 관한 연구)

  • Cheong, Kwang-Hyun;Ahn, Jong-Gil
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2006.05a
    • /
    • pp.71-77
    • /
    • 2006
  • There is a growing concern about the damage to aquatic ecosystem caused by immigration of non-indigenous species. It is estimated that more than 10,000 million tons of ballast water is transported by shipping activities annually, and ballast water has been recognised as a major vector for the transplant of aquatic species across bio-geographical boundaries. The problem of harmful aquatic organism in ballast water for the control and management of ships' ballast water and sediments was adopted and diplomatic conference of IMO at February 2004. At once ballast water is transported by shipping activities for organic compounds, nitrogen, phosphorus and heavy metal etc. but, It's fixing a focus only for the transported of pathogenic bacteria and non-indigenous species. Hence, this studies on the distribution of organic compounds, nitrogen, phosphorus and heavy metal in ballast water during the shipping activity with the basic data which is necessary to the systemic manage of ballast water.

  • PDF

The Ingredients of Mascara Causing Effects on the Eyes (눈에 영향을 미칠 수 있는 마스카라의 성분)

  • Jang, Sun;Kho, Young Lim;Kim, Hyojin;Kang, Bonghoon;Lee, Eun-Hee
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.14 no.4
    • /
    • pp.83-87
    • /
    • 2009
  • Purpose: This study was performed to detect various chemicals such as metal elements and volatile organic compounds which contained in mascara and we analyzed 5 sorts of mascaras frequently used by people. Methods: We purchased five sorts of mascaras commercially available and analyzed for detecting metal elements and volatile organic ingredients. Results: We found somewhat high concentration of aluminum and manganese and several organic compounds in some samples. Conclusions: The results suggest that mascara has metal elements and organic compounds which can influence to eye.

  • PDF

Effects of Heavy Metal Compounds (As, Cr, and Se) on the Development of Drosophila melanogasier (중금속화합물(As, Cr, Se)이 초파리 발생계에 미치는 영향)

  • 김기원;정연태;박승택;김정중
    • The Korean Journal of Zoology
    • /
    • v.30 no.2
    • /
    • pp.99-106
    • /
    • 1987
  • It is the purpose to investigate the physiological toxity and mutagenicity by heavy metal compounds such as potasium dichromate, sodium arsenite and selenium dioxide on the development of Drosophila melanogaster. These chemical compounds were highly toxic at every developmental stage of Drosophila. The relative values of fecundity, viability and developmental time obtained on food media containing 5 different levels of potasium dichromate (500, 600, 700, 800, and 900 ppm), also 5 different levels of sodium arsenite and selenium dioxide (10, 15, 20, 25 and 30 ppm). Resulting in the relative values of fecundity and viability generally decreased, on the contrary developmental time generally reduced as the concentration of chemicals in the food increased. A significant reduction in the fecundity was observed between 800 and 900 ppm (p<0. 01) on the potasium dichromate media, between 15 and 20 ppm (p<0. 05) on the sodium arsenite media, between 20 and 25 ppm (p<0. 02) on the selenium dioxide media. A significant reduction in the viability was observed between 700 and 800 ppm (p<0. 01) on the potasium dioxide media, between 25 and 30 ppm (p<0. 01) on the sodium arsenite media, between 20 and 25 ppm (p<0. 01) on the selenium dioxide media. The developmental time was significantly reduced between 800 and 900 ppm (p<0. 001) on the potasium dioxide media, between 15 and 20 ppm (p<0. 001) on the sodium arsenite media, and between 25 and 30 ppm (p<0. 01) on the selenium dioxide media.

  • PDF

Property about Extraction of Metal Ion in the Synthesized Crown Ether Model Compounds (합성한 crown ether 모델 화합물에서 금속이온의 추출 특성 연구)

  • Lee, Yong-Hee;Suh, Myung-Gyo;Roh, Jong-Su;Lee, Kook-Eui;Lee, Young-Sei
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.6 no.3
    • /
    • pp.165-169
    • /
    • 2003
  • To extract alkali metal ions and heavy metal ions, search for crown ether model compounds (4a-b, 5a-b, 6a-b) bearing side arm has led to achieve in 5~6 steps starting from 2,6-dimethylaniline. The determination of structure in their compound derivatives were on the basis of melting point and nuclear magnetic resonance spectroscopy. In the solvent extraction of metal ions from the synthesized derivatives, we observed that silver ion has only high selectivity for synergistic ligation of crown ether.

  • PDF