• Journal of Life Science
• /
• v.21 no.1
• /
• pp.56-61
• /
• 2011

This study was performed to investigate effective extract conditions in fronds of the Ostrich fern (Matteuccia struthiopteris) to increase antioxidant compound contents and antioxidant capacity. Powder (1 g) of lyophilizated fronds were mixed with 3 kinds of solvents (MeOH, 80% EtOH and water). Extractions were carried out using not only immersion (room temp.), heating ($60^{\circ}C$) and stirring (200rpm) for 6 hr, but also through sonication in a 42 kHz ultrasonic bath for 15, 30 and 45 min. Extracts were filtrated and measured for contents of soluble solids (SS), total polyphenols (TP; tannic acid as a standard) and total flavonoids (TF; Naringin as a standard). Antioxidant activity was expressed as $RC_{50}$ for DPPH and ABTS radical scavenging. SS (0.317 $g{\cdot}g^{-1}$ db), TP (70.90 $mg{\cdot}g^{-1}$ db) and TF (41.53 $mg{\cdot}g^{-1}$ db) contents reached their highest levels when 30 minute sonication extraction with 80% EtOH was performed, and the highest DPPH and ABTS scavenging activity was observed in the same extraction conditions ($RC_{50}$=0.14 $mg{\cdot}ml^{-1}$ and 0.09 $mg{\cdot}ml^{-1}$, respectively). From the present investigation, it can be concluded that fronds of the ostrich fern can be used as a natural material for antioxidants, and sonication for 15-30 min with 80% EtOH is an ideal extraction method for increasing their antioxidant effects and saving extraction time.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.822-828
• /
• 2002

Fabrication and electrical characterization of R. F. High-power unit capacitors were investigated to study on condition of fabrication processing for R. F. High-power unit capacitor and electrical characteristics according to addition of $ZrO_2$. The unit capacitors were fabricated using tape casting. The optimum mixture ratio of dielectrics and mixing binder for the slurry fabrication was 57.5∼60.0: 42.5∼40.0 wt%. The slurry viscosity was 4000∼5000 cps and casting state of green tape fabricated using these slurry was excellent. Optimum stacking was made by 200 kg/$cm^2$ pressure with 80$^{\circ}C$ heating. $ZrO_2$ was added to improve the electrical characteristics of unit capacitor, especially breakdown characteristics. The dielectric constant and loss factor of the unit condenser having different $ZrO_2$ amounts was not changed in the addition range of 1 to 5 wt%. Also, dielectric constant was not changed in the frequency range of 10 to 500 kHz. It was found that characteristics of resistance voltage was improved through the formation of $CaZrO_3$ and the reduction of particle size as about 3wt% $ZrO_2$ was added.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.428-436
• /
• 2012

This study aimed to develop the multi-span plastic greenhouse which is suitable for tomato cultivation and is safe against climatic disasters such as typhoon or heavy snow. The width and heights of eaves and ridge of newly developed tomato greenhouse are 7, 4.5 and 6.5 m, respectively. The width is the same but the eaves and ridge heights are 1.8 and 2 m higher than conventional 1-2 W greenhouses, respectively. Cross beam has been designed as a truss structure so it can sustain loads of tomato and equipment. Tomato greenhouse has been designed according to climatic disaster preventing design standard maintaining the high height. In other words, the material dimensions and interval of materials including column and rafter have been set to stand against $40m{\cdot}s^{-1}$ of wind and 40 cm of snow. Tomato greenhouse has been equipped with rack-pinion type roof vents which have been used in glass greenhouse in order to prevent excessive rise in air temperature. This vent type is different from that of 1-2 W type greenhouse which is made by rolling up and down the vinyl at upper part of column. Roof vents are installed at ridge, and thus external air inflow and natural ventilation are maximized. As the height increases, heating cost increase as well and, therefore, tomato greenhouse has been equipped with multi-layered thermal curtain, of which thermo-keeping is excellent, to prevent heat from escaping.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.112-119
• /
• 2017

In this study, the availability of cow manure as raw material for solid fuel production was investigated. Since the water content of the cow manure was too high, it was dewatered using a laboratory hydraulic compressure ($11.3kg/cm^2$). The moisture content of the cow manure decreased from 82.01% to 73.36 wt.%. The dewatered cow manure was homogenized by the experimental apparatus and then put into the rotating cylindrical apparatus. From the consecutive processes, the cow ball-shaped pellet which size ranged from 3.0 to 25.0 mm was produced. The major factor for making palletized fuel from cow manure was the moisture content. Based on the experimental data, the moisture content of cow manure for pelletizing cow manure was identified as 65~75 wt.%. When the moisture content of the cow manure was lower than 30 wt.%, the diameter of the pellets maded from cow manure was smaller than 3 mm. On the other hand, when the water content of the cow manure was higher than 75 wt/%, the diameter of the processed pellets tended to be larger than 25 mm. The characteristics of the processed cow manure pellets was analyzed to be in accordance with the livestock solid fuel quality standard. The pyrolysis characteristic of the pellet was analyzed by raising the heating temperature of the experimental equipment from 200 to $900^{\circ}C$. The mass change between of 20 and $130^{\circ}C$ corresponds to the amount of moisture contained in the cow manure. The amount of moisture was about 15% of the total weight of cow manure samples. The cow manure pellet was thermally stable up to $280^{\circ}C$. It can be interpreted that combustion of cow manure pellet does not occur until the surface temperature reaches $280^{\circ}C$. The mass change of pellet between of 280 and $450^{\circ}C$ was considered to be due to the vaporization of volatile organic compounds (VOCs) present in the cow manure pellet. The maximum production of VOCs was showed near $330^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.461-468
• /
• 2000

To investigate the antigenotoxicity of Korean mistletoe using Comet assay, the crude extract was divided into 4 fractions, i.e. fraction I (MW range over 14,000), fraction II $(8,000{\sim}14,000)$, fraction III $(3,500{\sim}8,000)$, and fraction IV (below 3,500) by molecular weight fractionation. In the non-tumoral 3T3 cells, fraction IV could reduce DNA damage induced by MNNG in a dose dependent pattern while fraction I and III which were known to contain lectins and viscotoxins, respectively, did not show the activity. By heat treatment, the antigenotoxic activity of faction IV, though was gradually diminished according to heating time, was found to be maintained significantly. From the Sephadex G-25 gel filtration chromatography, a more purified fraction responsible for the activity of faction IV was obtained from the latter part of total elute. Therefore, it was concluded that the antigenotoxic components of Korean mistletoe were water soluble substances of MW below 1,000 and there is a possibility of utilization as a material of functional foods for chemoprevention.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.1
• /
• pp.27-34
• /
• 2015

Many applications of nanoparticles have been developed since 1970s. Surface plasmon resonance (SPR) effect can be generated at the surface of nanoparticles by illumination. SPR is the resonant oscillation of conduction electrons at the surface material stimulated by incident light. The collisions between excited electrons and metal atoms can cause the production of thermal energy (photothermal effect). Here, we presented the development of thermo-cosmetics using photothermal effect of gold nanoparticles. Gold nanoparticles (GNPs) were chosen for it's low toxicity. We also and investigated the cell biocompatibility and heating effectiveness for photothermal effect of GNPs. Synthesized GNPs were verified by UV-vis spectrophotometer, where GNP has a characteristic absorbance spectrum. Concentration of GNP was measured by atomic absorption analyzer. The cytotoxicity was confirmed by MTT assay and double staining assay. Photothermal effect of GNP was demonstrated by the thermal increasing properties depending on GNP concentration, which was taken by an IR-thermal camera with a xenon lamp as the light source. If the thermal effect of GNP is applied for thermo-cosmetics, it can supply heat to skin by converting solar energy into thermal energy. Thus, cosmetics containing GNPs can provide benefits to people in the cold region or winter season for maintaining skin temperature, which lead to a positive effect on skin health.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1252-1257
• /
• 2011

Number of crop residues generated at large amount in agriculture can be utilized as substrate in methane production by anaerobic digestion. Greenhouse vegetable crop cultivation that adopting intensive agricultural system require the heating energy during winter season, meanwhile produce waste biomass source for the methane production. The purpose of this study was to investigate the methane production potential of greenhouse vegetable crop residues and to estimate material and energy yield in greenhouse system. Cucumber, tomato, and paprika as greenhouse vegetable crop were used in this study. Fallen fruit, leaf, and stem residues were collected at harvesting period from the farmhouses (Anseong, Gyeonggi, Korea) adopting an intensive greenhouse cultivation system. Also the amount of fallen vegetables and plant residues, and planting density of each vegetable crop were investigated. Chemical properties of vegetable waste biomass were determined, and theoretical methane potentials were calculated using Buswell's formula from the element analysis data. Also, BMP (Biochemical methane potential) assay was carried out for each vegetable waste biomass in mesophilic temperature ($38^{\circ}C$). Theoretical methane potential ($B_{th}$) and Ultimate methane potential ($B_u$) off stem, leaf, and fallen fruit in vegetable residues showed the range of $0.352{\sim}0.485Nm^3\;kg^{-1}VS_{added}$ and $0.136{\sim}0.354Nm^3\;kg^{-1}VS_{added}$ respectively. The biomass yields of residues of tomato, cucumber, and paprika were 28.3, 30.5, and $21.5Mg\;ha^{-1}$ respectively. The methane yields of tomato, cucumber, and paprika residues showed 645.0, 782.5, and $686.8Nm^3\;ha^{-1}$. Methane yield ($Nm^3\;ha^{-1}$) of crop residue may be highly influenced by biomass yield which is mainly affected by planting density.

• Clean Technology
• /
• v.27 no.3
• /
• pp.247-254
• /
• 2021

In this study, an eco-friendly combustion process of waste 2,4,6-trinitrotoluene (TNT: 2,4,6-trinitrotoluene) was developed, and fundamental data for the quantity of the organic matter in the final combustion residues is presented. Because complete combustion of TNT is not possible theoretically, the combustion process was optimized to reduce organic matter content in the combustion residue by performing measures such as heating time changes, addition of propellant material, and after treatment using a high-temp electrical furnace. From the results, it was confirmed that the organic matter content in the residue could be decreased to 7 ~ 10% with each method. The quantity of the organic matter could be minimized by optimizing the combustion conditions of the process. With only a combustion time increase, the amount of organic matter in the combustion residues was measured at about 9 wt%. The environmental friendliness of the final exhaust gas was also confirmed by real time gas component analyses. In addition, the organic contents could be reduced by a further 2 wt% by applying an additional heat treatment using an external electric furnace after the first incineration treatment. In the combustion process of propellant added waste TNT, it was found that various TNT wastes could be treated using the same eco-friendly protocols because the organic content in the residue decreased in accordance with the amount of propellant. The amount of the organic matter content produced by all these methods fulfilled the requirements under the Waste Management Act.

• Journal of the Korean Society for information Management
• /
• v.36 no.2
• /
• pp.31-56
• /
• 2019

The user satisfaction and needs of an academic library were caught through a questionnaire survey in this study. The aim of this study is to draw up the CRM based plan for meeting user needs on the study. The users' demographic information, library resources & their use, homepage, services, and facilities/environment of the library were categorized in the questionnaire and analyzed for this study. The major conclusions of this study are: (1) The library resources use was the highest, and its facilities/environment was the lowest in the user satisfaction study. It also revealed that there are much necessities for the quick acquisition and dissemination of the requested material to the library users, and for the inter-library loan (ILL) services among campuses for the subscription books in the library resources use study, too; (2) There are a lot of necessities for the improvement of OPAC retrieval and the subscription books system, and menu rearrangement in the library homepage; (3) There are a lot of necessities for the plans of more frequent library event, more detailed event guidance, and more reinforcement of public relations such as SMS, push services of SDI etc. in the library user services; and (4) There are a lot of necessities for the improved policies to the complaints of library users such as the lack of common study place and lockers, air conditioning and heating problem, complaints about facilities management of restroom (lack of toilet paper), library accessibility on campus, unauthorized user management etc. in the facilities/environment of the library.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.311-321
• /
• 2019

Greenhouse farmers often use thermal screens to reduce greenhouse heating expenses during the winter, and for shade during hot, sunny days in the summer, as it is an inexpensive solution to temperature control relative to other available options. However, accurate measurements of their emitted and absorbed radiations are important for the selection of suitable screens that offer maximum performance. Material's ability to save energy is highly dependent on these properties. Limited studies have investigated the measurement of these properties under natural conditions, but they are only applicable to materials having partial porosities. In this work, we describe a new radiation balance method for determining emissive power and absorptive capacity, as well as reflectivity, transmissivity and emissivity of materials having complete and partial transparency by using pyrgeometer and net radiometer. In this study, four materials with zero porosity, were tested. The emissivity value of PE, LD-13, LD-15 and PH-20 was $0.439{\pm}0.020$, $0.460{\pm}0.010$, $0.454{\pm}0.004$, and $0.499{\pm}0.006$, respectively. All tested samples showed high emitted radiation as compared to absorbed radiation.