• 건축역사연구
• /
• 제27권3호
• /
• pp.15-26
• /
• 2018

As a result of reviewing various documents and existing researches, since the late Goryeo period, the most active period in the Ondol(溫突, Korean floor heating system) facilities is the 17th century. The phenomenological reason was recovering the buildings destroyed by the Japanese Invasion of Korea in 1592(壬辰倭亂) & the Manchu War of 1636(丙子胡亂), but the underlying cause was an abnormal climate in which a pair of summer and winter cold continued. In the 17th century, as the Ondol facilities grew rapidly without distinction between regions and classes, the supply and demand of fuel caused economic and natural environmental problems. And a negative and positive view on Ondol was suggested. Since the middle of the 18th century, when the demand and supply of Ondol reached its peak, which could no longer increase, a new awareness of Ondol began to grow. The room was called the Panbang(板房) and the Ondol, depending on the material that made up the floor. It was considered natural to have the Ondol from this time on. The Incan(因間) and Jo(竈) that were made to burn were started to be recorded as a kitchen, regardless of size and function. Changes in social awareness of Ondol have led to concerns about heating efficiency. A variety of architectural explorations were conducted. Such a search was later realized in concrete architectural form. There is a double Ondoll structure, and the column spacing is reduced compared to the previous one. The heat buffer space is formed around the Ondol room, and the double window can control the light and the air going in and out.

• 한국재료학회지
• /
• 제31권3호
• /
• pp.156-161
• /
• 2021

Cr-Si based alloys are not only excellent in corrosion resistance at high temperatures, but also have good wear resistance due to the formation of Cr3Si phase, therefore they are promising as metallic coating materials. Aluminum is often added to Cr-Si alloys to improve the oxidation resistance through which stable alumina surface film is formed. On the other hand, due to the addition of aluminum, various Al-containing phases may be formed and may negatively affect the heat resistance of the Cr-Si-Al alloys, so detailed investigation is required. In this study, two Cr-Si-Al alloys (high-Si & high-Al) were prepared in the form of cast ingots through a vacuum arc melting process and the microstructural changes after high temperature heating process were investigated. In the case of the cast high-Si alloy, a considerable amount of Cr3Si phase was formed, and its hardness was significantly higher than that of the cast high-Al alloy. Also, Al-rich phases (with the high Al/Cr ratio) were not found much compared to the high-Al alloy. Meanwhile, it was observed that the amount of the Al-rich phases reduced by the annealing heat treatment for both alloys. In the case of the high temperature heating at 1,400 ℃, no significant microstructural change was observed in the high Si alloy, but a little more coarse and segregated AlCr phases were found in the high Al alloy compared to the cast state.

• 사물인터넷융복합논문지
• /
• 제8권1호
• /
• pp.23-29
• /
• 2022

본 연구의 개발대상 제품은 선박 및 발전용 EGB(Exhaust Gas Boiler-폐열보일러) 종류로써 디젤 엔진, 가스 엔진, 가스 터빈 등에서 나오는 배기 가스의 여열을 이용하여 물을 가열하여 고온·고압의 증기나 온수를 발생시키는 열회수 장치이다. 발생된 증기나 온수는 선박의 선실 난방 및 온수 시설이나 HFO Heating, 터빈 구동에 필요한 동력원으로 사용된다. 폐열보일러의 원리는 여열을 가진 고온의 배기 가스가 보일러의 Tube를 통과하면서 물을 데우는 역할을 한다. 데워진 물은 스팀 형태로 선실이나 터빈장치로 보내어져 사용하게 되는 구조이다. 본 연구에서는 EGB의 열전달 부품인 관형 튜브를 Plate Tube로 대체하여 열전달 표면을 늘려 효율을 극대화하는데 목표가 있다.

• 건축역사연구
• /
• 제24권3호
• /
• pp.43-56
• /
• 2015

Researches on the pit dwellings in the Joseon Dynasty era have been constantly conducted in the archeology field since the beginning of the 2000s. Most of the related researches in the past have been on the classification and chronological record of dwelling types in archeology, but architectural researches on the dwelling history that is connected from the prehistoric age to the Joseon Dynasty era are insufficient. There are no big differences between the excavated pit dwellings of the Joseon Dynasty era and those of the prehistoric age, so pit dwellings were considered to have been used as dwellings for common people until the Joseon dynasty era. This fact is confirmed by the frequency and density of pit dwellings. In this research, what space composition of the pit dwellings that are equipped with the Korean floor heating system is shown according to the plan types was examined and the development and transition process from pit dwellings to Folk houses were analyzed and their correlations with the Folk houses of the Joseon Dynasty era were examined. The Folk house form did not start with the form of the house on the ground but originate from the introduction of Ondol, the Korean floor heating system, to pit dwellings. As the Korean floor heating system is used, the room and kitchen space are composed in the pit dwelling, and the kitchen is expanded to the one that separates the fireplace for cooking to avoid heating that is unnecessary for the summer season. As the size of the dwelling was getting bigger, the division of the space is made by the pillars that support the interior space. Also, the dwelling is expanded into a single row house and a double row house according to the progress direction of Ondol. In other words, the pit dwellings in the Joseon Dynasty era develops with making up diverse floors through the combination and expansion of Ondol and kitchen according to the dweller's convenience and life style and surrounding environment. This research is significant in the sense that it helps understand the formation and development process of our traditional Folk houses and fills the gap between the pit dwellings, which have been dealt with inadequately, and traditional Folk houses in the Korean dwelling history.

• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.221-226
• /
• 2000

Hot air heater with light oil burner is the most common heater for greenhouse heating in the winter season in Korea. However, since the thermal efficiency of the heater is about 80∼85%, considerable unused heat amount in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The heat recovery system is made for plant bed or soil heating in the greenhouse. The system consisted of a heat exchanger made of copper pipes, ${\Phi}12.7{\times}0.7t$ located in the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tank. The total heat exchanger area is 1.5$m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to the performance test it could recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690\ell$/hr from the waste heat discharged. The exhaust gas temperature left the heat exchanger dropped to $100^{\circ}C$ from $270^{\circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{\circ}C$ from $21^{\circ}C$ at the water flow rate of $690\ell$/hr. By the feasibility test conducted in the greenhouse, the system did not encounter any difficulty in operations. And, the system could recover 220,235kJ of exhaust gas heat in a day, which is equivalent of 34% of the fuel consumption by the water boiler for plant bed heating of 0.2ha in the greenhouse.

• 생명과학회지
• /
• 제32권3호
• /
• pp.232-240
• /
• 2022

리포좀을 제조하는 방법으로 여러가지 알려져 있다. 그 중 Bangham법이 가장 간단하며 일반적으로 많이 이용되어 왔다. 소규모 실험 수준에서는 효과적으로 리포좀을 제조할 수 있지만 유기용매 제거의 어려움과 지질막 형성에 반응기 크기 등의 문제로 대규모 생산을 할 수 없다는 문제점이 있다. 반면 톤(t) 단위로 대량생산이 가능한 Emulsion Method는 균일한 입자를 가진 리포좀으로 제조가 가능하나 포집률이 현저히 낮은 단점이 있다. 그래서 본 연구에서 높은 포집율과 안정성을 향상시킨 Heating Method으로 리포좀 최적의 공정방법을 개발하여 포집률, 입자크기, 제타전위 및 SD rat에 경구 투여하여 흡수율 실험을 수행하였다. 약 214 nm의 작고 균일한 리포좀을 형성하였고, 포집률은 Emulsion Method는 26.46%, Heating Method는 38.67%으로 Heating Method법을 제조된 리포좀이 높은 포집률을 보여주는 것을 확인할 수 있었다. 혈중 농도 대비 모든 군에서 1.5-2배 정도 증가한 경향을 보여주었고, 4-12 hr까지 점차 낮아지는 양상을 나타냈다. Ascorbic acid powder의 혈중 최고 농도는 약 12.017 ㎍/ml, Emulsion Method 리포좀 13.871 ㎍/ml, Heating Method 리포좀은 16.322 ㎍/ml 순으로 ascorbic acid powder보다 향상된 흡수율 결과를 보여주었다.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.69-77
• /
• 2024

최근 전자기기의 소형화, 다기능화 등으로 인한 전자부품 실장 영역의 한계치를 극복하고 플라스틱 사출물에 직접 회로를 인쇄하고 소자 및 부품을 실장하는 molded interconnect device (MID) 형태의 패키징 기법이 도입되고 있다. 다만 열 안정성이 낮은 플라스틱 사출물을 사용하는 경우, 종래의 리플로우 공정을 통한 부품 실장에 어려움이 있다. 본 연구에서는 특정 부위 혹은 소재만을 가열할 수 있는 유도가열 현상을 이용하여 플라스틱에 어떠한 열 데미지 없이 솔더를 용융시켜 실장하는 공정을 개발하였다. 가열하고자 하는 부위에 자속을 집중시킬 수 있는 유도가열용 Cu 코일 형상을 설계하고, 유한요소해석을 통해 패드부 자속 집중 및 가열 정도를 검증하였다. Polycarbonate 기판 위에 실장공정 검증을 위한 LED, capacitor, resistor, connector를 각각 유도가열을 통해 실장하고 작동여부를 확인하였다. 본 연구를 통해 리플로우 공법의 한계를 극복가능한 자기유도를 통한 선택적 가열 공정의 적용 가능성을 제시하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.114-117
• /
• 1999

This paper has described about principle and form of proposed circuit made use of soft switching technology ZVS(Zero-Voltage-Switching) to reduce turn on and off loss at switching. Also, the analysis of the proposed circuit was described by using normalized parameter and operating characteristics has been evaluated as to switching frequency and parameters. Based on the characteristics value, a method of the circuit design is proposed. The theoretical results are in good agreement with the experimental ones. The proposed circuit is considerated to be useful for induction heating and discharge lamp.

• 한국음향학회지
• /
• 제3권1호
• /
• pp.9-15
• /
• 1984

Thermoacoustic oscillation induced by a heater in a tube with air current is studied theoretically. Linearized perturbation equations are derived in dimensionless form under the assumption that the system is one dimensional. The equation to predict the acoustic power generation from a heating surface is derived and calculated by solving differential equations numerically. The effect of the mean velocity of the air current is illustrated. The energy conversion mechanism is shown by pressure-volume diagram like a heat engine.

• 한국세라믹학회지
• /
• 제17권1호
• /
• pp.35-41
• /
• 1980

Alumina extraction from raw Hadong kaolin with sulfuric acid was studied to obtain relatively pure alumina. Factors as acid concentration, heating temperature and conditions of ammonium alum crystal formation from extracted solution are also surveyed and most of iron oxide in kaolin is eliminated in crystallization of ammonium alum. Pure crystal obtained from the extracted solution with ammonium sulfate is relatively free from iron containment in mother liquor. Alumina in ammonium alum crystal is converted to gibbsite form after complete hydrolysis in ammonia gas.