• Journal of Animal Science and Technology
• /
• v.59 no.10
• /
• pp.23.1-23.11
• /
• 2017

Background: Although soybean meal (SBM) is excellent source of protein in diets for poultry, it is sometimes inaccessible, costly and fluctuates in supply. The SBM can partially be replaced by full-fat SBM, but the meals prepared from raw full-fat soybean contain antinutritional factors. To avoid the risk of antinutritional factors, heat treatment is always advisable, but either excessive or under heating the soybean could negatively affect the quality. However, the potential for further improvement of SBM by supplementing with microbial enzymes has been suggested by many researchers. The objective of this study was to evaluate the performance and ileal nutrient digestibility of birds fed on diets containing raw soybeans and supplemented with microbial protease. Methods: A $3{\times}2$ factorial, involving 3 levels of raw full-fat soybean (RFFS; 0, 45 or 75 g/kg of diet) and 2 levels of protease (0 or 15,000 PROT/kg) was used. The birds were raised in a climate-controlled room. A nitrogen-free diet was also offered to a reference group from day 19 to 24 to determine protein and amino acid flow at the terminal ileum and calculate the standardized ileal digestibility of nutrients. On days 10, 24 and 35, body weight and feed leftover were recorded to calculate the body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR). On day 24, samples of ileal digesta were collected at least from two birds per replicate. Results: When RFFS was increased from 0 to 75 g/kg of diet, the content of trypsin inhibitors was increased from 1747 to 10,193 trypsin inhibitors unit (TIU)/g of diets, and feed consumption of birds was also reduced (P < 0.05). Increasing RFFS level reduced the BWG from hatch 0 to 10 d (P < 0.01) and hatch to 24 d (P < 0.05). The BWG of birds from hatch to 35 was not significantly (P = 0.07) affected. Feed intake was also reduced (P < 0.05) during 0 to 35 d. However, protease supplementation improved (P < 0.05) the BWG and FCR during 0 to 24 d. Rising levels of RFFS increased the weight of pancreas (P < 0.001) and small intestine (P < 0.001) at day 24. Except for methionine, apparent and the corresponding standardized ileal digestibility of CP and AA were reduced (P < 0.01) by increasing levels of RFFS in diets. Conclusion: This study showed that some commercial SBM could be replaced by RFFS in broiler diets, without markedly compromising productivity. The AID and SID of CP and lysine were slightly improved by dietary supplementation of microbial protease.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.413-419
• /
• 2011

Diagnosis X-ray equipment localized at 1950's but it is developed suddenly at 1960's with demand together. Manufacture of Diagnostic X-ray equipment is controled by the KS regulation and the Ministry of Health and Welfare because of hazardous element etc. exposure by radiation. Most of diagnostic X-ray equipment ware single phase and three phase full-wave rectification but from 1980's it transforms it was exchanged in inverter type X-ray equipment. Inverter type X-ray equipment produces approximately 50~80% more average photon intensity then single phase full-wave rectification and the accuracy is high. But from a clinic it dose not use because expensive therefor the efficiency improvement of single phase full-wave rectification is necessary. We produced single phase full-wave rectification X-ray equipment control unit, high tension transformer, filament heating transformer, rectification circuit, high tension cable and others and evaluated efficiency, in result which is excellent compare with Rule of Safety Management and KS regulation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.3
• /
• pp.303-312
• /
• 2011

Data on the energy usage including biomass, emissions of air pollutants ($SO_x$, $NO_x$, CO), and the air quality in North Korea are analyzed. The energy usage in North Korea has decreased in the 1990s and thus, the emission amount of air pollutants. Coal and biomass constitute a major fraction of energy sources since the 1990s. It is identified that the emission amount of air pollutants per unit energy consumption in North Korea is much higher than South Korea for the period data are available (since 1990) implying that the air pollutant emission management system in North Korea is inadequate. In particular, the amount of biomass burning for household cooking and heating is significant with the huge emissions of air pollutants such as CO and organic species both in the gas and aerosol phase. Furthermore, it is found that the existing energy usage and air pollutant emission data are not consistent in biomass burning related data.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.71-75
• /
• 2001

In this paper, a three-dimensional measuring system of thermoluminescence(TL) spectra based on temperature, wavelength and luminescence intensity was introduced. The system was composed of a spectrometer, temperature control unit for thermal stimulation, photon detector and personal computer for control the entire system. Temperature control was achieved by using feedback to ensure a linear-rise in the sample temperature. Digital multimeter(KEITHLEY 195A) measures the electromotive force of Copper-Constantan thermocouple and then transmits the data to the computer through GPIB card. The computer converts this signal to temperature using electromotive force-temperature table in program, and then control the power supply through the D/A converter. The spectrometer(SPEX 1681) is controlled by CD-2A, which is controlled by the computer through RS-232 communication port. For measuring the luminescence intensity during the heating run, the electrometer(KEITHLEY 617) measures the anode current of photomultiplier tube(HAMAMATSU R928) and transmits the data to computer through the A/D converter. And, we measured and analyzed thermoluminescence of $CaSO_4$ : Dy, P using the system. The measuring range of thermoluminescence spectra was 300K-575K and 300~800 nm, $CaSO_4$ : Dy. P was fabricated by the Yamashita's method in Korea Atomic Energy Research Institute(KAERI) for radiation dosimeter. Thermoluminesce spectra of the $CaSO_4$ : Dy, P consist of two main peak at temperature of $205^{\circ}C$, wavelength 476 nm and 572 nm and with minor ones at 658 nm and 749 nm.

• Microbiology and Biotechnology Letters
• /
• v.45 no.3
• /
• pp.236-242
• /
• 2017

The conversion of marine biomass to renewable energy has been considered an alternative to fossil fuels. Butanol, in particular, can be used directly as a fuel. In this experiment, the brown alga Undaria pinnatifida was selected as a biomass for biobutanol production. Hyper thermal (HT) acid hydrolysis was used as an acid hydrolysis method to produce monosaccharides. The optimal pretreatment conditions for U. pinnatifida were determined as slurry with 10% (w/v) U. pinnatifida content and 270 mM $H_2SO_4$, and heating at $160^{\circ}C$ for 7.5 min. Enzymatic saccharification was carried out with Celluclast 1.5 L, Viscozyme L, and Ultraflo Max. The optimal saccharification condition was 12 U/ml Viscozyme L. Fermentations were carried out for the production of acetone, butanol, and ethanol by Clostridium acetobutylicum KCTC 1724, Clostridium beijerinckii KCTC 1785, and Clostridium tyrobutyricum KCTC 5387. The fermentations were carried out using a pH-control. The optimal ABE fermentation condition determined using C. acetobutylicum KCTC 1724 adapted to 160 g/l mannitol. An ABE concentration of 9.05 g/l (0.99 g/l acetone, 5.62 g/l butanol, 2.44 g/l ethanol) was obtained by the consumption of 24.14 g/l monosaccharide with $Y_{ABE}$ of 0.37 in pH 5.0.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.4
• /
• pp.231-236
• /
• 2014

Sawdust, produced as an wood by-product, is usable biomass as liquid fuels if decomposed to monomer unit, because the chemical structure are similar to high octane materials found in gasoline. In this study, parameters of thermochemical degradation by acetone-solvolysis reaction of sawdust such as the effect of reaction temperature, reaction time and type of solvent on conversion yield and degradation products were investigated. The liquid products by acetone-solvolysis from sawdust produced various kind of ketone, phenol and furan compounds. The optimum sawdust conversion was observed to be 88.7% at $350^{\circ}C$, 40min. Combustion heating value of liquid products from thermochemical conversion processes was as high as 7,824 cal/g. The energy yield and mass yield in acetone-solvolysis of sawdust was 60.8% and 36.4 g-oil/100g-sawdust after 40 min of reaction at $350^{\circ}C$, respectively. The major components of the acetone-solvolysis products, that could be used as liquid fuel, were 4-methyl-3-pentene-2-one, 1,3,5-trimethylbezene, 2,6-dimethyl-2,5-heptadiene-4-one, 3-methyl-2-cyclopenten-1-one as ketone compounds.

• Journal of architectural history
• /
• v.11 no.2 s.30
• /
• pp.37-56
• /
• 2002

The purpose of this study is to examine the changing process of the collective housing in Korea; focusing on the alteration process of the apartment housing, which became a representative housing type in Korea, nowadays. The alteration process of the apartment housing in Korea can be divided into three stages: the introduction stage, the trial stage and the settled stage. The introduction stage is the period between 1920, when the collective-housing buildings were constructed in Korea for the first time, and the Liberation of Korea(1945). The trial stage is the period between 1945 and 1975. During this period, common housing has been constructed. And the massive apartment buildings were started to be supplied after 1975. The settled stage is the period between 1975 and the present. The main scope of this study will be the introduction and trial stages, since a lot of in-depth studies have been executed on the settled stage. The history of the collective housing of Korea starts with City Housing of Seoul, in 1921. It is guessed that this housing was to be small-sized and row-housing type. The first-built, apartment-type building, in Korea, was Mikuni Apartment House, which was constructed as a boarding room of Mikuni Company. In the introduction stage, apartment buildings were built by Japanese architects, with Japanese housing style. Most of them were planned in dormitory type, and some of them were run as tenant houses. Most of them were constructed by bricks, but sometimes by timbers. Tadami was laid in every room and inside-corridor was located in the middle of the house. Although the major style of the apartment buildings was Japanese, the Korean dwellers of those apartments has been influencing the housing type of them. In the trial stage, apartment housing has been experienced in diverse ways. With the development of building technology, floor heating system was settled in apartment housing. This improved the amenities of apartment dwelling remarkably. Although some heterogeneous characteristics still remained in the apartments of Korea, in terms of housing style, the housing style of apartments has been changed into own style of Korea, in accordance with Korean people's life style. The results of this study give us some good implications regarding contemporary housing plan: First, if the unit size of a collective housing is small, the more space could be available for community activities. Second, when planning of collective housing, more concerns should be payed on surroundings. Third, more attention should be payed about low-rise apartment housing, and more land-friendly planning would be required.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.400-409
• /
• 2017

We have studied a combiner that can withstand high power while minimizing insertion loss in high frequency band. In particularly, because the output power that can be output per unit elements is much lower in the Ku band and above than in the low frequency band, it is necessary to combine many semiconductor elements in order to make a high power SSPA. A planar combiner such as a microstrip, as the number of elements to be combined increases, the insertion loss increases proportionally, resulting in a reduction in the overall system efficiency and an increase heating value also. The planar combiner also have some problems due to the low power handling rate. To improve these problems, we proposed a Cavity Radial Combiner. A Ku band 16-way Cavity Radial Combiner was fabricated and measured. As a result, it was tested 14dB return loss and over 94.5 % output combining efficiency in design band.

• Journal of Food Hygiene and Safety
• /
• v.14 no.3
• /
• pp.293-304
• /
• 1999

The purpose of this study was to evaluate the microbiological quality, and to assure the hygienic safety of the food production in the university food service facility located in Seoul in accordance with the Hazard Analysis Critical Control Point(HACCP) concepts. In the hygienic state assessment of kitchen, it has revealed that it was very important to remove water from the kitchen floor and to establish standard method for disinfection of cooking utensils. And foodservice workers were required to have training program for the safe handling of food and utensils since they did treat food without hygienic gloves. The kitchen layout had to be improved because the near distance of table with heating unit and shelf might cause the growth of microorganisms when prepared food was kept on the shelf. In terms of the timetemperature measurement and microbiological quality assessment during each of the food production phases, most of sengchae (raw vegetable dish) and namul (cooked vegetable dish) were treated within danger zone for food safeness ($5~60^{\circ}C$). It has shown that the microbiological quality of raw materials was very much inferior at the time of receiving based on the TPC($10^{5}~10^{7}$), coliform($10^{3}~1O^{6}$), which was not acceptable level(TPC:$10^{6}$, coliform:$10^{3}$) suggested by Solberg. Microbiological growth has increased in the both of sengchae and namul considerably during most of food production phase. Therefore, it is extremely important to reduce holding and serving time and to avoid treating food within the danger zone for food safeness. In addition, the prevention of cross-contamination during mixing the ingredients with improper equipments and with insanitary treatments by workers was also important to keep the food safety in this speciqic university foodservice facility.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1249-1255
• /
• 2011

In modern large-scale semiconductor manufacturing clean rooms, the energy consumed by the outdoor air-conditioning system during heating, humidification, cooling, and dehumidification of the incoming outdoor air represents about 45% of the total air-conditioning load required to maintain a clean-room environment. In particular, the energy required for humidification of the outdoor air in winter is very high. Therefore, evaluation and comparison of the energy consumption in key humidification systems, viz., steam-humidification and water-spray-humidification systems, used in outdoor air-conditioning systems would be useful to reduce the outdoor air-conditioning load in clean rooms. In the present study, an experiment with an outdoor air flow of 1000 $m^3$/h was conducted to compare the air-conditioning process and energy consumption in outdoor air-conditioning systems with electrodeboiler steam humidifiers and air-washer water spray humidification systems. The experimental results showed that the water-spray-humidification-type outdoor air-conditioning system consumed less electrical power than did the steam-humidification-type system and was more energy efficient during winter.