• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.32-46
• /
• 2000

Hydrogeochemical and isotope ($\delta$$^{18}$ O, $\delta$D, $^3$H, $\delta$$^{13}$ C, $\delta$$^{34}$ S, $^{87}$ Sr/$^{86}$ Sr) studies of various kinds of waters (thermal groundwater, deep groundwater, shallow groundwater, and surface water) from the Yusung area were carried out in order to elucidate their geochemical characteristics such as distribution and behaviour of major/minor elements, geochemical evolution, reservoir temperature, and water-rock interaction of the thermal groundwater. Thermal groundwater of the Yusung area is formed by heating at depth during deep circlulation of groundwater and is evolved into Na-HCO$_3$type water by hydrolysis of silicate minerals with calcite precipitation and mixing of shallow groundwater. High NO$_3$contents of many thermal and deep groundwater samples indicate that the thermal or deep groundwaters were mixed with contaminated shallow groundwater and/or surface water. $\delta$$^{18}$ O and $\delta$D are plotted around the global meteoric water line and there are no differences between the various types of water. Tritium contents of shallow groundwater, deep groundwater and thermal groundwater are quite different, but show that the thermal groundwater was mixed with surface water and/or shallow groundwater during uprising to surface after being heated at depths. $\delta$$^{13}$ C values of all water samples are very low (average -16.3$\textperthousand$%o). Such low $\delta$$^{13}$ C values indicate that the source of carbon is organic material and all waters from the Yusung area were affected by $CO_2$ gas originated from near surface environment. $\delta$$^{34}$ S values show mixing properties of thermal groundwater and shallow groundwater. Based on $^{87}$ Sr/$^{86}$ Sr values, Ca is thought to be originated from the dissolution of plagioclase. Reservoir temperature at depth is estimated to be 100~1$25^{\circ}C$ by calculation of equilibrium method of multiphase system. Therefore, the thermal groundwaters from the Yusung area were formed by heating at depths and evolved by water-rock interaction and mixing with shallow groundwater.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1102-1110
• /
• 2008

This research was performed to analyze the characteristics of wood wastes from origin and to suggest grade-classification for them. Korean proximate analysis was conducted, and heating value, heavy metals and Cl concentrations were analyzed for gradeclassification. Wood wastes were sampled from forest, living, construction and demolition, and industrial areas with origin. Moisture content of most wood wastes was ranged in 5$\sim$10%. VS (volatile solids) and ash contents of them showed > 95% and < 5%, respectively. Most wood wastes except wood for growing mushroom permitted the standard (low heating value $\geq$ 3,500 kcal/kg) for refusederived fuel. CCA (Cr, Cu, As) concentration of wood wastes used in bench, wasted fishing boat, and railroad crosstie was higher than that of the other ones. Cl content showed approximately 1.3% in wood box for fish and $\leq$ 0.2% in the other wood wastes. Cl content of all wood wasted used in this research permitted the standard (Cl $\leq$ 0.2%, dry weight basis) for refuse-derived fuel. If the wood wastes were classified in 3-grade, plywoods would be in 2nd grade, and MDF (medium density fiber), wooden bench, painted electric wire drum, wasted fishing boat, and railroad crosstie be in 3rd grade.

• Korean journal of food and cookery science
• /
• v.18 no.3
• /
• pp.325-332
• /
• 2002

The purpose of this study was to compare the effect of several reheating treatments (immersing the package into hot water, heating the soup in the pot and convection ovens after taking out of the opened package. heating the soup package in microwave) on the sensory characteristics of cook-chill and sous-vide spinach soup. Sensory evaluations were made on 5 sensory attributes by a 12-member panel using quantitative descriptive analysis(QDA). The fresh cooked spinach soup had a significantly(p＜0.01) higher score in color than the reheated sous-vide one. The latter, however, had a significantly(p＜0.05) higher score in taste than the former. Overall acceptability of the sous-vide spinach soup was not different from that of fresh cooked one, which supports the potential of the product in foodservice operation for the efficient management of meal plan. Reheating treatments didn't show any differences in taste, flavor, color, texture, appearance and overall acceptability. Therefore, any reheating treatment nay be used for cook-chill and sous-vide spinach soup.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.1
• /
• pp.28-41
• /
• 2014

The distinctive physiological effect of dietary fiber in the body were studied according to contents and characteristics of each fiber component. In the present study, the composition of fiber in vegetables was investigated, and the effect of heat treatments on fiber content was studied. Contents of total pectin were 0.89~2.75 g/100 g on dry weight basis, with most contents from 1~2 g/100 g. The hot water soluble pectin (HWSP) content of vegetables ranged from 0.33~0.98 g/100 g, sodium hexametaphosphate soluble pectin (HXSP), from 0.29~0.81 g/100 g and HCl soluble pectin(HCLSP), from 0.30~1.40 g/100 g. HCLSP showed the greatest variation according to the type of vegetables. Every vegetable types showed similar contents of these three pectic fractions. Fiber contents of vegetables ranged from 8.8~23.8% for cellulose, 0.6~10.6% for hemicellulose, 1.0~5.2% for lignin, 10.9~25.4% for acid detergent fiber (ADF) and 11.8~31.9% for neutral detergent fiber (NDF) on dry weight basis. Especially, peppers showed higher contents of NDF than the other vegetables. It was found that a great portion of NDF, which is total insoluble dietary fiber, was composed of cellulose since cellulose constituted 63% of NDF. Heat treatment reduced total pectin content in all vegetables regardless of the heating methods and the greatest reduction was observed upon boiling. HWSP content increased, whereas HXSP and HCLSP contents decreased. Heat treatment increased the NDF, ADF and cellulose contents, and most changes were due to changes in cellulose content. The values of hemicellulose and lignin showed irregular pattern upon heating. Contents of total dietary fiber (TDF) were 1.20~7.11% on fresh weight basis. Garlic, edible burdock and pepper leaf showed higher contents of TDF than other vegetables. It was found that a great portion of TDF was composed of insoluble dietary fiber.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.79-87
• /
• 1978

This is an experimental study on friction welding and heat treatment of engine exhaust valve materials whose welding combination is SCr4 as stem to 21-4N as head and SUH3 to 21-4N. In this study, not only the experiments of friction welding under the selected optimum welding condition and the examination of the mechanical properties were carried out, but also the heat treatment of friction welded specimens under the two selected conditions was taken to obtain the better welding character, eliminating the latent stress and the hardness peak which appeared at the welded zones of heat resisting steel(21-4N, SUH3) and low alloyed steel ($SCr_4$) friction weldments. The results obtained by the experiments and consideration in this study are as follows: I) It was experimentally proved quite reasonable that 'speed=3,OOO rpm, heating pressure Pl=8 kg/ mm2, upsetting pressure p, = 20 kg/mm', heating time $t_1$ = 3 see, upsetting time TEX>$t_2$ = 2.5 sec' was selected as the optimum welding condition for friction-welding the engine exhaust valve materials $SCr_4$ to 21-4 Nand SUH 3 to 21-4 N. 2) The results of the previous study and this one on friction welding of such dissimilar materials as SUH 3-SUH 31, SCr 4-SUH 31, SCr 4-SUH 3, SUH 3-CRK 22, SCr4-21-4 Nand SUH3-21-4 N agreed with each other substantially in the friction welding characteristics at welded interface zones. 3) It was also certified quite satisfactory that '600\ulcornerCX30 min. Xroom air cooling' as an optimum heat treatment condition of the friction welded materials SCr 4-21-4 Nand SUH 3-21-4 N was experimentally determined to eliminate the latent stress and the hardness peak at welded zones. 4) About 20% of the tensile strength before heat treatment of friction welded specimens was decreased after heat treatment 600\ulcornerCX30 min. Xair cooling, but the location of fracture was moved from heat affected zone to parent $SCr_4$ & SUH3. 5) Microscopic examination of the weld joints friction-welded and heat-treated under the above mentioned conditions revealed that the weld zone is very narrow and has a fine grained intermixed structure without any welding defects. 6) The above mentioned conditions can be also utilized as friction welding parameters of the other dissimiar materials for engine valve production.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.148-156
• /
• 2015

In this study the differences in the sample size and sample input changes as characteristics of bio-oil oak(Quercus variabilis), the oak 0.5~2.0 mm of the oak weighing 300~900g was processed into bio-oil via fast pyrolysis for 1.64 seconds. In this study, the physico-chemical properties of biooil using oak were investigated. Fast pyrolysis was adopted to increase the bio-oil yield from raw material. Although the differences in sample size and sample input changes in the yield of pyrolysis products were not significantly noticeable, increases in the yield of bio-oil accounted for approximately 60.3 to 62.1%, in the order of non-condensed gas, and biochar. When the primary bio-oil obtained by the condensation of the cooling tube and the seconary bio-oil obtained from the electric dust collector were measured separately, the yield of primary bio-oil was twice as higher than that of the secondary bio-oil. However, HHV (Higher Heating Value) of the secondary bio-oil was approximately twice as higher than that of the primary bio-oil by up to 5,602 kcal/kg. The water content of the primary bio-oil was more than 20% of the moisture content of the secondary bio-oil, which was 10% or less. In addition, the result of the elemental analysis regarding the secondary bio-oil, its primary carbon content was higher than that of the primary bio-oil, and since the oxygen content is low, the water content as well as elemental composition are believed to have an effect on the calorific value. The higher the storage temperature or the longer the storage period, the degree of the viscosity of the secondary bio-oil was higher than that of the primary bio-oil. This can be the attributed to the chemical bond between the polymeric bio-oil that forms during the storage period.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.753-759
• /
• 2016

The processing properties of spent hen and broiler chicken were investigated before and after treatment to improve texture characteristics. Each treatment consisted steaming (S) with $85^{\circ}C$ for 20 min, Pulsed Electric Field (PEF) with 1.5 KV/cm for 4 sec, and Super Heated Steam (SH) with an oven temp. of $300^{\circ}C$, a steam temp. of $350^{\circ}C$ for 8 min. The yield of spent hen and broiler were 66.85% and 63.80% respectively in the control, but decreased in every treatment was lowest at 61.05% in the PEF treatment (p<0.05). In the color test, L value decreased, but the a and b values increased regardless of the species of spent hen or broiler. In the test of heating loss, the S treatment of spent hen had the highest result of 45.25% but lowest of 30.66% in the SH treatment of the broiler. When it was compared with various treatments, SH after PEF treatment showed the better result in terms of heating loss than the PEF or SH treatment respectively. In the test of texture, the broiler showed the lowest hardness of 5.57 kg in the SH (p<0.05). Otherwise, the spent hen resulted in 14.08 kg of hardness in steaming after PEF, but it improved significantly to 10.73 kg in SH after PEF. In the test of 9 scored sensory evaluation of overall palatability, 7.8 point was the best score with SH treatment in the broiler. The best score in spent hen was 6.3 point which was SH after PEF treatment. With this experiment, SH after PEF was the condition in the treatments to have the better texture of spent hen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1572-1578
• /
• 2007

The specified wastes consist of waste acid, waste alkali, waste oil, waste organic solvent, waste resin, dust, sludge, infectious waste, and others. Among these specified wastes, a great portion is liquid phase wastes. The purpose of this study is to develop the high temperature and high pressure (HTHP) treatment system for decomposition of the liquid phase specified waste (LPSW). For this, we analyzed the physical and chemical properties of the LPSW such as density, proximate analysis, ultimate analysis, heating values, and designed 0.3 ton/day HTHP treatment system. The LPSW tested in this experiment were prepared by adding TCE(trichloroethylene) and toluene to liquid phase waste which was brought into the commercial waste treatment company. The average density of waste oil (25 samples), waste resin (5 samples), and waste solvent (12 samples) was 0.99 g/mL, 0.91 g/mL, and 0.93 g/mL, respectively. And the average lower heating value of waste oil, waste resin, and waste solvent was 8,294 kcal/kg, 5,809 kcal/kg, and 7,462 kcal/kg, respectively. The DRE (Destruction & Removal Efficiency) of TCE and toluene were 99.95% and 99.73% at atmospheric pressure conditions and that were 99.99% and 99.82% at pressurized conditions, respectively. These results showed that TCE/toluene mixtures were properly decomposed over about 99.73% of DRE by the HTHP treatment system and pressurized conditions were more effective to destroy those pollutants than atmospheric pressure conditions. Also these systems could be directly applied to industries which try to treat the liquid phase specified waste within the regulation limit.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.563-569
• /
• 2014

Ruby is one of the most favor colored gem, for beautiful red tone, be high in scarcity value. However, rubies with high quality are produced in restricted regions, such as in Thailand, Sri Lanka, Myanmar, and Tanzania etc., and they have been gradually exhausted by mining for a long period. Therefore, improving qualities of low level rubies with various treatments is arising an alternative way to obtain better rubies. Gemological and mineralogical properties of the natural ruby from Tanzanian were studied with heat treatments. Those characteristics were compared between only heat and adding flux materials under heating. Tanzanian raw rubies were applied a heat treatment ($1,600^{\circ}C$ for 6 hours). However, chromameter and UV-Vis analyses found that a simple heat treatment is inappropriated for the Tanzanian ruby. Although $Cr^{3+}$ containing for red color in the ruby increased with heat treatment, the ruby displays dark medium red because of Fe in the ruby as a form of $Fe_2O_3$. The low transparency after heat treatment is attributed to the recrystallization of $SiO_2$ which has a low melting point. Chromameter confirmed adding Pb-containing flux under heating greatly improves the clarity and color of Tanzanian rubies with micro-fractures and cavities on the surface. EMPA results show that Pb as an additive fills the cavities and cracks on raw Tanzanian rubies during the heat treatment. As a rewult of it, the quality of the Tanzanian ruby raw dramatically improved. These results indicate that the heat treatment with an additive (Pb in this study) is an effective way to obtain better quality of the Tanzanian ruby. Consequently, this study suggests a suitable method to improve the properties of the Tanzanina ruby. The result of this study would provide useful information to upgrade the qualities of similar gem stones such as corundum and sapphire.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.402-409
• /
• 2000

To investigate the textural and physical characteristics of WSF(whole soybean flour) tofu affected by coagulant and its concentration, $CaCl_2$, $CaSO_4$, $GDL(glucono-{\delta}\;lactone)$, $MgCl_2$, and some mixed coagulants were used in this study. Yields of WSF tofu coagulated with $CaSO_4$ and GDL were ranged 4.3-4.5(g/g WSF), but common tofu was 2.2-3.0(g/g soybean). As the water addition ratio increased, L and a value were increased while heating time increased, b value increased. L value of WSF tofu was lower and b value was higher than conventional tofu and 4 commercial tofus. Kinds of coagulant and its concentration significantly affected to textural properties of WSF tofu. As the concentration of coagulant increase, the hardness increased in most all coagulants. WSF tofu coagulated with $CaSO_4$ and GDL recorded low hardness and adhesiveness, and high springiness among the used coagulants at the same concentration. As the hardness increased, the gumminess and chewiness increased in most all coagulants. As coagulation temperature and molding pressure increase, hardness also increased. WSF tofu coagulated with 0.3% $CaSO_4+GDL$ was the most similar in the textural properties with conventional tofu and 4 commercial tofus. WSF tofu coagulated with 0.3% of $CaSO_4+GDL$ at $85^{\circ}C$, 10 times water addition, 5min. heating and $25.0g/cm^2$ molding pressure recorded the highest score in the sensory evaluation.