• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.398-403
• /
• 2011

A dielectric barrier discharge plasma (DBDP) treatment system was fabricated and the optimum operating conditions for the plasma generation were determined in order to explore the potential of cold plasma as a non-thermal proessing technology. The microbial inactivation performance of the system was also evaluated against Staphyloocus aureus. The system consisted of power supply, transformer, electrode assembly and sample treatment plate. The input power was 220 V single phase AC and amplified to 10.0-50.0 kV on a transformer. A pulsed sine wave of frequency 10.0-50.0 kHz was introduced to the electrode embedded in ceramic as a dielectric barrier material in order to generate plasma at atmospheric pressure. Higher currents and consequently greater power were required for the plasma generation as the frequencies increased. A homogeneous and stable plasma was generated at currents of 1.0-2.0, and frequencies of 32.0-35.3 kHz. The optimum electrode-gaps for the plasma generation were 1.85 mm without loaded samples. More power was consumed as the electrode-gaps increased. The practically optimum electrode- gap was, however, 2.65 mm when samples were treated on slide-glasses for microbial inactivation. The maximum temperature increase after 10 min treatment was less than 20$^{\circ}C$, indicating no microbial inactivation effect by heat and thereby insuring a non-thermal method. The DBDP inactivation effect against Staphyloocus aureus increased linearly with treatment time up to 5 min, but plateaued afterward. More than 5 log reduction was achieved by 10 min treatment at 1.25 A.

• Korean journal of food and cookery science
• /
• v.14 no.1
• /
• pp.44-49
• /
• 1998

The microwave cooking of rice was studied for the purpose of establishing optimum conditions of power level and heating time. Optimum volume of adding water was 290 ml per 173 g rice. The longer the rice was soaked, the better the cooked rice. However, we chose one hour as soaking time so that we might observe well the effects of power levels. The mode of microwave cooking consisted of 5 steps of power level; step 1: temperature ascendance, step 2: water absorption 1, step 3: water absorption 2, step 4: heat penetration, step 5: gelatinization completion. The quality of cooked rice was evaluated subjectively. As a result of the study, 3 optimum conditions were chosen as follows. 1) (7) 5:00-(1) 5:00-(2) 5:00-(2) 6:00-(7) 4:00, 2) (8) 4:25-(1) 5:00-(2) 5:00-(2) 5:00-(6) 4:00,3) (9) 3:40-(1) 5:00-(2) 5:00-(3) 6:00-(7) 2:00

• Nutrition Research and Practice
• /
• v.8 no.5
• /
• pp.526-532
• /
• 2014

BACKGROUND/OBJECTIVES: Acanthopanax sessiliflorus is a native Korean plant and used as a traditional medicine or an ingredient in many Korean foods. The free radical theory of aging suggests that cellular oxidative stress caused by free radicals is the main cause of aging. Free radicals can be removed by cellular anti-oxidants. MATERIALS/METHODS: Here, we examined the anti-oxidant activity of Acanthopanax sessiliflorus extract both in vitro and in vivo. Survival of nematode C. elegans under stress conditions was also compared between control and Acanthopanax sessiliflorus extract-treated groups. Then, anti-aging effect of Acanthopanax sessiliflorus extract was monitored in C. elegans. RESULTS: Stem extract significantly reduced oxidative DNA damage in lymphocyte, which was not observed by leaves or root extract. Survival of C. elegans under oxidative-stress conditions was significantly enhanced by Acanthopanax sessiliflorus stem extract. In addition, Acanthopanax sessiliflorus stem increased resistance to other environmental stresses, including heat shock and ultraviolet irradiation. Treatment with Acanthopanax sessiliflorus stem extract significantly extended both mean and maximum lifespan in C. elegans. However, fertility was not affected by Acanthopanax sessiliflorus stem. CONCLUSION: Different parts of Acanthopanax sessiliflorus have different bioactivities and stem extract have strong anti-oxidant activity in both rat lymphocytes and C. elegans, and conferred a longevity phenotype without reduced reproduction in C. elegans, which provides conclusive evidence to support the free radical theory of aging.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.15-17
• /
• 2008

$CuInS_2$ thin films were synthesized by sulpurization of Cu/In Stacked elemental layer deposited onto glass Substrates by vacuum furance annealing at temperature 200[$^{\circ}C$]. And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInS_2$ thin films with non-stoichiometry composition. $CuInS_2$ thin film was well made at the heat treatment 200[$^{\circ}C$] of SLG/Cu/In/S stacked elemental layer which was prepared by thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and hall measurement system. At the same time, carrier concentration, hall mobility and resistivity of the thin films was $9.10568{\times}10^{17}[cm^{-3}]$, 312.502[$cm^2/V{\cdot}s$] and $2.36{\times}10^{-2}[{\Omega}{\cdot}cm]$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.261-262
• /
• 2006

$CuInS_2$ thin films were synthesized by sulpurization of Cu/In Stacked elemental layer deposited onto glass Substrates by vacuum furance annealing at temperature 200[$^{\circ}C$]. And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInS_2$ thin films with non-stoichiometry composition. $CuInS_2$ thin film was well made at the heat treatment 200[$^{\circ}C$] of SLG/Cu/In/S stacked elemental layer which was prepared by thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1:1:2. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and hall measurement system. At the same time, carrier concentration, hall mobility and resistivity of the thin films was $9.10568{\times}10^{17}[cm^{-3}]$, 312.502 [$cm^2/V{\cdot}s$] and $2.36{\times}10^{-2}[{\Omega}{\cdot}cm]$, respectively.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.194-200
• /
• 2002

MOCVD(metal-organic chemical vapor deposition) copper thin film was annealed at various conditions and the eletrical properties and micro-structures were investigated to find the optimal annealing condition and its effect. Cu thin film annealed at Ar 1 torr, $400^{\circ}C$ had the most improved resistivity of 1.98 $\mu\Omega$cm, and texture; the ratio of $I_{(111)}/I_{(200)}$ was varied from 2.03 to 3.11, and Cu thin film annealed at Ar 1 torr, $450^{\circ}C$ had the largest grain size and uniformity. After the annealing, the EM(electromigration) test was followed to ensure the improved properties by annealing. Compare to other conditions, Cu patterns annealed at Ar 1 torr, $400 ^{\circ}C$ had the most improved properties when it came to the EM resistance, which was due to the low resistivity, the preferential evolution of texture to (111) plane, and the reduction of surface roughness of annealed copper film.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.4
• /
• pp.211-217
• /
• 1999

In order to investigate the possibilities of microbatteries using TiNi type metal hydride, TiNi films were prepared by DC magnetron sputtering. The films were deposited under various Ar flow rates, DC powers and target-to-substrate distances to find the optimum sputtering conditions. The deposition rate of TiNi thin film increased by increasing the DC power and by decreasing the Ar flow rate and target-to-substrate distance. The chemical composition of the film changed as a target-to-substrate distance. The crystal structure of the film was amorphous state just after deposition and changed to crystalline by vacuum heat treatment.

• Progress in Superconductivity
• /
• v.5 no.2
• /
• pp.124-127
• /
• 2004

Many of research efforts have been focused on the improvement of critical current density (Jc) of silver-sheathed Bi-2223 tapes far practical applications. In this study, the transformation of Bi-2212 phase was investigated, which was transformed to orthorhombic from tetragonal through pre-annealing during powder packing and drawing process. The relationship between hardness of Bi-2212 orthorhombic phase and workability of Bi-2223/Ag tape was investigated. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking and drawing process with different heat-treatment histories. Before rolling process, round wires were pre-annealing at 76$0^{\circ}C$ and in a low oxygen partial pressure. We confirmed that pre-annealing step was to transform to Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases. However the breakages were created at Ag-alloy clad during rolling for pre-annealed Bi-22231Ag tapes. Several pre-annealing scenarios were introduced to reduce the breakages during rolling process. Microstructure and critical current density of pre-annealed Bi-2223 superconducting tapes were investigated. We could achieve proper pre-annealing conditions for Ag-alloy clad Bi-2223 superconducting tapes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.211-214
• /
• 2004

In the present study, the effect of SIDT (Strain Induced Dynamic Transformation) on the microstructure of medium carbon steels was investigated to develop spheroidized annealing-free steel wire rods. When $0.45\%C$ steels were hot-deformed under the conditions of heavy reduction at low temperatures, a microstructure quite different from conventional ferrite-pearlite structure was obtained. It was considered that this ferrite-cementite microstructure was obtained because very small retained austenite grains existing between fine SIDT ferrites prefer to transform to cementite and ferrite instead of pearlite during cooling. Through the present study, $0.45\%C$ steels containing ferrite-cementite (FC) structure instead of ferrite-pearlite structure was obtained in as-rolled state by introducing SIDT. The specimen containing the FC structure was much softer than that containing conventional ferrite-pearlite structure. Therefore, it is concluded that deforming medium carbon steels under the conditions of SIDT is a very powerful method to obtain soft steel wire rods which could be cold-forged without softening heat-treatment

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1580-1597
• /
• 1969

1. The field test of our experiment comparing the traditional syckle and the new manually pulled cutter showed that the working efficiency of the manually pulled cutter is about two times higher than that of the syckle. The operator can standerect while using the manually pulled cutter, thus reducing fatigue. Because of the reduction in body fatigue, the operator is able to work more total hours, making the manually pulled harvester three times more efficient than the syckle. 2. The optimum angle for the V-shaped cutter blade varies according to the number of the hiller, but in manufacturing the cutter, the range must be controlled between $35^{\circ}{\sim}45^{\circ}$. 3. The radius of curvature of the V-shaped blade is closely related to the blade angle. The best results were obtained when the radii of curvature were r=32cm with $35^{\circ}$ angle, r=153mm with $45^{\circ}$ angle, and r=220mm with $40^{\circ}$ angle. 4. The hardness distribution test of the blade showed great differences between foreign made and domestic made blades. The heat treatment method must be greatly improved for superior hardness distribution. 5. Although the efficiency of the manually pushed cutter is equal to that of the manually pulled cutter, the manually pushed cutter is not only more expensive to produce but also has a much more complicated structure than the manually pulled cutter. Because of our rural economic conditions, the power harvester which is utilized in foreign countries can not yet be introduced here. Thus, the manually pulled cutter should be popularized in our rural areas until economic conditions will allow us to introduce power harvesters. 6. The use of the manually pulled cutter will make it possible for an operator to harvest an area in only one-third of the time that it would take to harvest the same area with a traditional syckle, and it will make it possible for an operator to earn about 8,000 won for harvesting 10 Jung-bo: such benefits will help in increasing farm income and will contribute to farm modernization.