• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1606-1608
• /
• 1997

We have synthesized PPP from benzen by chemical reaction. And then disordered carbon materials were obtained by heating-treating PPP in a nitrogen atmosphere for 1, 4, 8 and 12 hour at $700^{\circ}C$. The carbon prepared by heat treatment showed a broad x-ray diffraction peak around $2{\theta}=20^{\circ}$ having a property of disordered carbon. Carbon electrodes were charged and discharged at a current density of $0.25mA/cm^2$. In the result, PPP-based carbon obtained at $700^{\circ}C$ for 8h showed 605mAh/g of first discharge capacity and had a small hysteresis characteristic.

• 혜화의학회지
• /
• 제10권1호
• /
• pp.79-92
• /
• 2001

According to the literatural study on the Acupuncture & Moxibustion and Traumatherapyof hysterorrhea, the results were as follows. 1. The acupuncture & moxibustion of hysterorrhea is focussed on bloody uterine discharge, leukorrhea and we must carefully diagnose the etiology & the machanism of disease. 2. The causes of hysterorrhea are dampness, impairment of seven emotion, irregular food intake, excessive intercourse and they are impotantly related to liver, spleen, kidney, the ren channel, the chong channel. 3. The diagnosis is grossly divided into the flowing downward of damp-heat, the weaknessof the qi of the spleen, dificiency of yuan of the kidney and according to the each diagnosis, we should select adquate points representing the treatment of cooling(zhongji, yinlingquan, xingjian, etc), desiccation, heiping qi(qihai, zusanli, sanyinjiao, etc), tonificating yang (guanyuan, mingmen, shinshu, etc). 4. The moxibustion is the warming the lower jiao and eliminating the cold, the points are the mingmen point, the zhongji point, the guanyuan point, etc. 5. Besides the acupuncture & moxibustion of hysterorrhea, we can make use of acusetor, ear acupuncture, endermosis, dong shi shen fa. 6. As of traumatherapy of hysterorrhea, fumigation,abluent and soppository are generally used. and the prescriptions as GAMISASANGSAN, BANSUKSAN are used. 7. The medical herbs used on the treatment of hysterorrhea are the tonificating yang, dissipeting, desiccating medicines generally composed of CNIDII FRUCTUS, ALUMEN, ZANTHOXYLI FRUCTUS.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.47-53
• /
• 2000

Saemangeum coastal area is being constructed the 33km sea dike and 40,000ha reclamation area. The purpose of this study is to find the residual circulations in spring before and after the dike construction by a robust diagnostic and prognostic numerical model. Heat flux at the sea surface in May was adopted on the basis of the daily inflow of solar radiation at the earth surface, assuming an average atmospheric transmission and no clouds, as a function of latitude and time of year(George L.P.,J. E. William,1990). The discharge from the Geum, the Mankyung and the Dongjin rivers was adopted on the basis of experience formula of river flow in May(The M. of C.,Korea, 1993). Water temperature and salinity along the open boundaries are obtained from the results of field observations. The results of spring of the residual flow in the Saemangeum coastal area by a prognostic numerical model lead to the following conclusions: Water temperature in spring is the highest, salinity is the lowest and density is the lowest at the upper layer near the coast after the dike construction. The flow pattern at the upper layer during spring is anti-clockwise circulation between Wi and Shinsi islands. The flow pattern at the lower layer is clockwise circulation between Wi and Shinsi islands.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.630-635
• /
• 2008

A dynamic model has been developed to investigate the operability of a single and double-effect solar energy assisted parallel type absorption chiller. In the study, main components and fluid transport mechanism have been modeled. Flow discharge coefficients of the valves and the pumps were optimized for the double-effect mode with solar-heated water circulated. The model was run for the single mode with solar energy supply only and the solar/gas driving double effect mode. And the cases of the double mode with and without the solar energy were compared. From the simulation results, it was found that the present configuration of the chiller is not capable of regulating solution flow rates according to variable solar energy input. And the single mode utilizing the solar energy only is not practical. It is suggested to operate the system in the double mode and the flow rate control system adaptive to variable solar energy input has to be developed.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권4호
• /
• pp.220-228
• /
• 2002

The cool-down performance after soaking is very important in an automotive air-conditioning system and is considered as a key design variable. Therefore, transient characteristics of each system component are essential to the preliminary design as well as steady-state performance. The objective of this study is to develop a computer simulation model and ostinato theoretically the transient performance of an automotive air-conditioning system. To do that, the mathematical modelling of each component, such as compressor, condenser, receiver/drier, expansion valve, and evaporator, is presented first of all. The basic balance equations about mass and energy are used in modelling. For detailed calculation, condenser and evaporator are divided into many sub-sections. Each sub-section is an elemental volume for modelling. In models of expansion valve and compressor, dynamic behaviors are not considered in this analysis, but the quasisteady state ones are just considered, such as the relation between mass flow rate and pressure drop in expansion device, polytropic process in compressor, etc. Also it is assumed that there are no heat loss and no pressure drop in discharge, liquid, and suction lines. The developed simulation model is validated by comparing with the laboratory test data of an automotive air-conditioning system. The overall time-tracing properties of each component agreed well with those of test data in this case.

• Journal of Acupuncture Research
• /
• 제22권2호
• /
• pp.103-110
• /
• 2005

Phellodendri Cortex (PC) has been used traditionally in Korea for damp heat leukorrhea with thick, yellow, discharge, foul-smelling diarrhea or dysentery. We investigated whether the Phellodendri Cortex Herbal-acupuncture Solution (PCHS) induced cell-death on SNU-17, human cervical cancer cell. 3-(4,5-Dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay was performed to find out the cytotoxicity of PCHS. The cell death was identified as apoptosis from the results of 4, 6-diamidineo-2-phenylindole (DAPI) staining, terminal deoxy-nucleotidyl transferase (TdT)-mediated dUTP nick end labeling (TUNEL) assay. The expression of proapototic gene, Bax, was increased and the expression of apoptotic gene, Caspase-3, was also increased. Considering the above results, PCHS could induce the apoptosis on SNU-17, human cervical cancer cell, via Bax-related Caspase-3 activation. And it might provide the experimental data for the clinical use of Phellodendri Cortex on cervical cancer.

• 한국입자에어로졸학회지
• /
• 제9권1호
• /
• pp.31-36
• /
• 2013

In this study, Mo metal powder was prepared by hydrogen reduction of Mo trioxides with different purity of 2N and 3N grades. We have obtained Mo metal powder with oxygen content of 1450 ppm by hydrogen reduction and subsequent heat treatment for degassing. Using the Mo metal powder, a low-oxygen Mo ingot was prepared by repetitive vacuum arc melting. The oxygen content of the obtained Mo ingot was less than 70 ppm after vacuum arc melting for 30 min. The purity of the Mo metal powder and the ingot was evaluated using glow discharge mass spectrometry. The purity of the respective Mo ingots was increased to 3N and 4N grades from the Mo powder of 2N and 3N grades after the repetitive vacuum arc melting. The low oxygen Mo ingot thus can be used as a raw material for sputtering targets.

• 물과 미래
• /
• 제27권3호
• /
• pp.123-134
• /
• 1994

돌출방류수로에 의하여 동일한 수심의 개수로에 방류되는 부력방류에 의한 연안귀환이 수리실험에 의하여 해석되었다. 부력방류는 온수를 방류하여 발생된다. 돌출방류로 인하여 부력류 하류에 형성되는 재순환영역의 크기는 비돌출방류에서 보다 증가하는 경향을 갖으나 황온도분포는 균일하고 횡단면 최대온도는 감소를 나타낸다. 높은 부력흐름율과는 반대로 낮은 부력흐름율 조건에서 단면평균온도 또는 열흐름율은 돌출길이의 영향이 무시할 정도이다. 비돌출의 경우에는 연안귀환에 유속비가 지배적인 매개변수이었으나 돌출방류의 경우에는 유속비와 후르드수가 다같이 지배적인 인자로 나타났다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.278-283
• /
• 2003

A generation rate of sludge in Korea had increased dramatically about 200 % for a decade. A requirement for high efficiency dewatering system being possible to produce the low water content cake have suggested due to the appearanceof commercial and social problems about handling of dewatered cake. The conventional dewatering system with mechanical compression device was not suitable to produce the low water content cake and didn'tcope with lots of requirements. Therefore, this paper was to develop the high efficient filter press with the compressive and heating forces through the heating plate to be built between membrane filter plates. It is possible to produce the low water content cake and improve the dewatering rate, so this equipment positively coped with several types of problems related to the sludge dewatering. The plate heated by heat transfer materials such as steam, hot water and thermo-oil made the sludge make the residual moisture within the cake to discharge easilyand to improve the dewatering efficiency of equipment. The pilot scale experiment with 500kg of cake production showed that the dewatering efficiency determined by the final water content and dewatering velocity was improved 30% more than the conventional dewatering equipment.

• Carbon letters
• /
• 제9권3호
• /
• pp.210-217
• /
• 2008

Petroleum pitch and coke with wet mixture method or with dry mixture method were investigated to develop the composite anodic carbon material of high power lithium ion battery. Cokes coated with pitch were obtained by the heat treatment of mixture of cokes and pitch with different weight ratios at $800{\sim}1200^{\circ}C$. The charge and discharge characteristic of the consequent composite anodic carbon material assembled in batteries was tested. Cokes with wet mixture method have a smooth surface and their capacity changed little with changing temperature and content as compared to the cokes with dry mixture method. Although the reversible capacities showed different values by the anode manufacturing method, the composite anode with the mixture of 20 wt% of petroleum pitch and 80 wt% of coke showed the higher power capability and initial efficiency than the pitch based anode. However, the reversible capacity of the composite anode showed the reduced value as compared with the pitch based anode.