• 제목/요약/키워드: Heat detection

검색결과 437건 처리시간 0.023초

Improved Metal Object Detection Circuits for Wireless Charging System of Electric Vehicles

  • Sunhee Kim
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제17권8호
    • /
    • pp.2209-2221
    • /
    • 2023
  • As the supply of electric vehicles increases, research on wireless charging methods for convenience has been increasing. Because the electric vehicle wireless transmission device is installed on the ground and the electric vehicle battery is installed on the floor of the vehicle, the transmission and reception antennas are approximately 15-30 cm away, and thus strong magnetic fields are exposed during wireless charging. When a metallic foreign object is placed in the magnetic field area, an eddy current is induced to the metallic foreign object, and heat is generated, creating danger of fire and burns. Therefore, this study proposes a method to detect metallic foreign objects in the magnetic field area of a wireless electric vehicle charging system. An active detection-only coil array was used, and an LC resonance circuit was constructed for the frequency of the supply power signal. When a metallic foreign object is inserted into the charging zone, the characteristics of the resonance circuit are broken, and the magnitude and phase of the voltage signal at both ends of the capacitor are changed. It was confirmed that the proposed method has about 1.5 times more change than the method of comparing the voltage magnitude at one node.

블레이드 팁의 Groove 형상이 터빈 캐스케이드 팁 열전달 계수분포에 미치는 영향에 대한 실험적 연구 (Effect of Groove Shape of Blade Tip on Tip Surface Heat Transfer Coefficient Distributions of a Turbine Cascade)

  • 노영철;조용화;이용진;김학봉;곽재수
    • 한국추진공학회지
    • /
    • 제14권6호
    • /
    • pp.60-68
    • /
    • 2010
  • 본 연구에서는 팁 형상이 가스터빈 블레이드의 팁 열전달에 미치는 영향을 알아보기 위하여 선형 캐스케이드의 블레이드에 설치된 평면 팁, 스퀼러 팁, Groove 팁들에 대하여 열전달 계수가 측정되었다. 블레이드 팁에서의 열전달 계수는 색상검출방식에 기반을 둔 천이액정법을 이용하여 측정되었으며 각각의 팁 형상에 대하여 팁 간극은 블레이드 스팬의 1.5%와 2.3% 두 조건에서 실험을 수행하였다. 캐스케이드 출구 속도와 블레이드 코드길이에 기초를 둔 Reynolds 수는 $2.48{\times}10^5$ 이다. Groove 팁 표면에서의 열전달 계수는 평면 팁보다 낮게 측정되었으며, 특히 흡입면을 따라 경사진 홈이 파인 팁에서는 스퀼러 팁보다 낮은 열전달 계수가 측정되었다.

Improved antimicrobial effect of ginseng extract by heat transformation

  • Xue, Peng;Yao, Yang;Yang, Xiu-shi;Feng, Jia;Ren, Gui-xing
    • Journal of Ginseng Research
    • /
    • 제41권2호
    • /
    • pp.180-187
    • /
    • 2017
  • Background: The incidence of halitosis has a prevalence of 22-50% throughout the world and is generally caused by anaerobic oral microorganisms, such as Fusobacterium nucleatum, Clostridium perfringens, and Porphyromonas gingivalis. Previous investigations on the structure-activity relationships of ginsenosides have led to contrasting results. Particularly, the antibacterial activity of less polar ginsenosides against halitosis-related bacteria has not been reported. Methods: Crude saponins extracted from the Panax quinquefolius leaf-stem (AGS) were treated at $130^{\circ}C$ for 3 h to obtain heat-transformed saponins (HTS). Five ginsenoside-enriched fractions (HTS-1, HTS-2, HTS-3, HTS-4, and HTS-5) and less polar ginsenosides were separated by HP-20 resin absorption and HPLC, and the antimicrobial activity and mechanism were investigated. Results: HPLC with diode-array detection analysis revealed that heat treatment induced an extensive conversion of polar ginsenosides (-Rg1/Re, -Rc, -Rb2, and -Rd) to less polar compounds (-Rg2, -Rg3, -Rg6, -F4, -Rg5, and -Rk1). The antimicrobial assays showed that HTS, HTS-3, and HTS-4 were effective at inhibiting the growth of F. nucleatum, C. perfringens, and P. gingivalis. Ginsenosides-Rg5 showed the best antimicrobial activity against the three bacteria, with the lowest values of minimum inhibitory concentration and minimum bactericidal concentration. One major reason for this result is that less polar ginsenosides can more easily damage membrane integrity. Conclusion: The results indicated that the less polar ginsenoside-enriched fraction from heat transformation can be used as an antibacterial agent to control halitosis.

블레이드 팁의 Groove 형상이 터빈 캐스케이드 팁 열전달 계수분포에 미치는 영향에 대한 실험적 연구 (Effect of Groove Shape of Blade Tip on Tip Surface Heat Transfer Coefficient Distributions of a Turbine Cascade)

  • 노영철;조용화;이용진;김학봉;곽재수
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제34회 춘계학술대회논문집
    • /
    • pp.311-318
    • /
    • 2010
  • 본 연구에서는 팁 형상이 가스터빈 블레이드의 팁 열전달에 미치는 영향을 알아보기 위하여 선형 캐스케이드의 블레이드에 설치된 평면 팁, 스퀼러 팁, Groove 팁들에 대하여 열전달 계수가 측정되었다. 블레이드 팁에서의 열전달 계수는 색상검출방식에 기반을 둔 천이액정법을 이용하여 측정되었으며 각각의 팁 형상에 대하여 팁 간극은 블레이드 스팬의 1.5%와 2.3%로 변경 하에 실험을 수행하였다. 캐스케이드 출구 속도와 블레이드 코드길이에 기초를 둔 Reynolds 수는 $2.48{\times}10^5$ 이다. Groove 팁 표면에서의 열전달 계수는 평면 팁보다 낮게 측정되었으며, 특히 흡입면을 따라 경사진 홈이 파인 팁에서는 스퀼러 팁보다 낮은 열전달 계수가 측정되었다.

  • PDF

멀티 콘센트용 변류기 및 과전류 검출 회로 설계 (Design of a Current Transducer and Over-Current Fault Detection Circuit for Power Strip Applications)

  • 김용재;김민석;박규상;김재홍
    • 한국전자통신학회논문지
    • /
    • 제10권8호
    • /
    • pp.921-926
    • /
    • 2015
  • 멀티 콘센트의 과전류로 인한 과열을 방지하기 위한 보호방식으로는 주로 금속바이메탈 방식, 스위칭회로 방식, 마이크로컨트롤러(MCU)를 이용한 과전류 정밀제어 방식 등이 사용되어 오고 있다. 하지만 이러한 방식들은 보호회로가 과전류가 흐르는 전선에 병렬접속 함으로써 2차 화재의 위험이 있을 수 있으며 입력전압의 비선형 왜곡에 취약한 단점을 가지고 있다. 또한 기존의 방식들은 제품의 단가가 비교적 크게 올라가므로 충분한 시장성을 확보하기가 쉽지 않다. 본 논문에서는 이러한 문제를 해결하고자 과전류가 흐르는 전선에 비접촉식 관통형 변류기를 설계하고 변류기의 2차 유도전류를 이용하여 과전류를 감지하여 사용자가 과전류 상황을 인지할 수 있도록 LED 및 부저 회로를 통하여 시각 및 청각적 신호를 전달하는 기능을 구현한다. 실험 결과들로부터 제안된 회로는 매우 경제적이고 간단하면서도 안정적으로 동작함을 확인 할 수 있다.

Fundamental evaluation of hydrogen behavior in sodium for sodium-water reaction detection of sodium-cooled fast reactor

  • Tomohiko Yamamoto;Atsushi Kato;Masato Hayakawa;Kazuhito Shimoyama;Kuniaki Ara;Nozomu Hatakeyama;Kanau Yamauchi;Yuhei Eda;Masahiro Yui
    • Nuclear Engineering and Technology
    • /
    • 제56권3호
    • /
    • pp.893-899
    • /
    • 2024
  • In a secondary cooling system of a sodium-cooled fast reactor (SFR), rapid detection of hydrogen due to sodium-water reaction (SWR) caused by water leakage from a heat exchanger tube of a steam generator (SG) is important in terms of safety and property protection of the SFR. For hydrogen detection, the hydrogen detectors using atomic transmission phenomenon of hydrogen within Ni-membrane were used in Japanese proto-type SFR "Monju". However, during the plant operation, detection signals of water leakage were observed even in the situation without SWR concerning temperature up and down in the cooling system. For this reason, the study of a new hydrogen detector has been carried out to improve stability, accuracy and reliability. In this research, the authors focus on the difference in composition of hydrogen and the difference between the background hydrogen under normal plant operation and the one generated by SWR and theoretically estimate the hydrogen behavior in liquid sodium by using ultra-accelerated quantum chemical molecular dynamics (UA-QCMD). Based on the estimation, dissolved H or NaH, rather than molecular hydrogen (H2), is the predominant form of the background hydrogen in liquid sodium in terms of energetical stability. On the other hand, it was found that hydrogen molecules produced by the sodium-water reaction can exist stably as a form of a fine bubble concerning some confinement mechanism such as a NaH layer on their surface. At the same time, we observed experimentally that the fine H2 bubbles exist stably in the liquid sodium, longer than previously expected. This paper describes the comparison between the theoretical estimation and experimental results based on hydrogen form in sodium in the development of the new hydrogen detector in Japan.

열처리와 경정배양을 이용한 바이러스 무병 사과 생산 시스템 (Production System of Virus-free Apple Plants Using Heat Treatment and Shoot Tip Culture)

  • 이건섭;김정희;김현란;신일섭;조강희;김세희;신주희;김대현
    • 식물병연구
    • /
    • 제19권4호
    • /
    • pp.288-293
    • /
    • 2013
  • 국내외적으로 ACLSV, ASGV, ApMV, ASSVd와 같은 바이러스 및 바이로이드 병의 발생으로 사과 과실의 생산량 감소와 기형적인 외형 등 많은 문제점들이 보고되었다. 하지만 사과 바이러스의 감염에 대한 방제 대책은 거의 알려진 바가 없는 실정이다. 따라서 본 논문에서는 사과 신품종인 '단홍', '홍안', '새나라', '썸머드림'을 분양하기에 앞서 바이러스 무병묘를 생산하는 시스템을 확립하고자 하였다. $37^{\circ}C$가 유지되는 항온 항습장치에서 4주간 열처리를 하였으며 기내에서 경정 배양을 하였다. 열처리된 각각의 사과 신품종들은 바이러스 진단 프라이머를 통해 RT-PCR을 수행하여 바이러스 진단을 수행하였다. 결과적으로 '단홍'은 28%의 바이러스 무병묘를 확보할 수 있었으며 '홍안'은 16%, '새나라'와 '썸머드림'은 12%의 확률로 바이러스 무병 사과를 확보할 수 있었다. 본 연구결과는 열처리 및 경정배양을 통해 사과 신품종에서 바이러스 무병묘 생산 시스템 구축이 가능함을 보여주었다.

삼차신경손상의 온도역치검사에 대한 예비연구 (A Pilot Study for Thermal Threshold Test of Trigeminal Nerve Injuries)

  • 김미은
    • Journal of Oral Medicine and Pain
    • /
    • 제37권4호
    • /
    • pp.243-250
    • /
    • 2012
  • 임플란트 수술이나 발치 같은 침습적인 치과치료로 인한 삼차신경 손상의 증가는 최근 치과계의 가장 민감한 문제의 하나로서 향후 법적인 문제로 까지 이어질 수 있다. 그러므로 신경손상에 대한 객관적이고 신뢰성 있는 평가 즉, 정량적 감각신경 검사(quantitative sensory testing)의 필요성이 강조되고 있으며, 온도역치 검사는 QST의 필수 항목으로 구강영역에서도 신뢰성이 입증되어 있다. 국내에서는 삼차신경손상과 관련한 온도역치 검사에 대한 보고가 아직 없기에, 본원에서 시행한 일부 증례의 온도역치 검사의 결과를 평가하고자 하였다. 2011년 5월부터 2012년 10월까지 단국대학교 치과대학 부속 치과병원 구강내과에 내원한 삼차신경손상이 의심되는 환자중 온도역치 검사를 시행한 18명의 환자 자료를 분석하였다. 환자들의 냉인지역치(cold detection threshold, CDT)는 이환측이 비이환측에 비해 유의하게 낮았으나 온인지역치(warm detection threshold, WDT), 냉통각역치(cold pain threshold, CPT), 열통각역치(heat pain threshold, HPT)는 통계적 차이를 보이지 않았다. 향후 더 많은 피검자를 대상으로 온도 자극과 관련하여 감각저하나 감각과민, 통각저하나 통각과민 같은 유형별 비교 연구가 필요하다.