• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.356-362
• /
• 2000

Yakju(rice wine) was sterilized with high-voltage square-wave pulses of $1\;{\mu}s$ duration at various electric field strengths and frequencies on a serial multiple electrode pulsed electric field(PEF) treatment system consisted of 7 electrodes connected in series. The initial microbial counts of Yakju were $1.88{\times}10^3{\sim}2.13{\times}10^4$ CFU/mL for total aerobes, $1.55{\times}10^3{\sim}2.85{\times}10^4$ CFU/mL for lactic acid bacteria and $1.72{\times}10^3{\sim}2.39{\times}10^4$ CFU/mL for yeasts. The sterilization of microorganisms in Yakju was a first order reaction and the sterilization effect increased as the field strength and the frequency increased. The $D_{Hz}-value$ and the $D_{PEF}-value$ decreased with the electric field strength. Yeast showed lower $D_{PEF}-value$ than bacteria. Lactic acid bacteria showed lower $D_{PEF}-value$ than general aerobic bacteria under the electric field strength below 30 kV/cm, but higher ones under that above 40 kV/cm. The $Z_{PEF}-value$ of general aerobic bacteria, lactic acid bacteria and yeast in Yakju were 39.4, 49.3 and 47.6 kV/cm, respectively. The PEF sterilization resulted in less changes in color and sensory properties than heat sterilization, and the PEF treated Yakju showed superior quality to the heat treated one. The commercial sterilization of Yakju was accomplished with 2-cycle treatment on the tested serial PEF treatment system.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.207-212
• /
• 2007

The antimicrobial activity of Curcuma aromatica Salab. was investigated. The Curcuma aromatica Salab. extract showed antimicrobial activity against six pathogens tested. These were Listeria monocytogenes ATCC 19115, Pseudomonas fluorescens ATCC 21541,Staphylococcus aureus ATCC 29273, Salmonella typhimurium ATCC 21541, vibrio parahaemolyticus ATCC 17802, and Aeromonas hydrophila KCTC 2358. Antimicrobial activity was alsonoted when the extract was tested against four isolates of Bacillus sp. purified from spoiled tofu. The growth of various pathogens was significantly inhibited (100 10,000-fold) upon growth in tryptic soy broth containing 0.05 0.2%(w/v) Curcuma aromatica Salab. extract(CE), after incubation for 12hr at $37^{\circ}C$. The growth of the four Bacillus isolates was also significantly inhibited in nutrient broth containing 0.05 0.2% CE after incubation for 24hr at $37^{\circ}C$. Although the antimicrobial activity of CE was decreased by heat treatment at temperatures above $80^{\circ}C$, the activity remained relatively high after heat treatment at $121^{\circ}C$ for 15min. The minimum inhibitory concentrations of CE were 0.1 0.3%(v/v culture) for the six pathogens, and 0.2 0.25% for the Bacillus isolates, respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.819-825
• /
• 2018

Porous nanofibers comprising hollow ${\alpha}-Fe_2O_3$ nanospheres were prepared by applying both template method and Kirkendall diffusion effect to electrospinning process. During heat-treatment processes, the solid Fe nano-metals formed by initial heat-treatment in the carbon matrix were converted into the hollow structured ${\alpha}-Fe_2O_3$ nanospheres. In particular, PS nanobeads added in the spinning solution were decomposed and formed numerous channels in the composite, which served as a good pathway for Kirkendall diffusion gas. The resulting porous nanofibers comprising hollow ${\alpha}-Fe_2O_3$ nanospheres were applied as an anode material for lithium-ion batteries. The discharge capacities of the nanofibers for the 30th cycle at a high current density of $1.0A\;g^{-1}$ was $776mA\;h\;g^{-1}$. The good lithium ion storage property was attributed to the synergetic effects of the hollow ${\alpha}-Fe_2O_3$ nanospheres and the interstitial nanovoids between the nanospheres. The synthetic method proposed in this study could be applied to the preparation of porous nanofibers comprising hollow nanospheres with various composition for various applications, including energy storage.

• Animal cells and systems
• /
• v.5 no.1
• /
• pp.31-35
• /
• 2001

Temperate-resident bats exhibit a circadian cycle of torpor and arousal In summer. The physiological role and selective advantage of torpor as an energy saving mechanism have been received much attention by hibernation biologists. However, despite the significance of the recovering euthermic function, the arousal process and mechanism in these animals have been poorly addressed. In this study, we investigated thermogenic and motor activities of a local bat species Murina leucogaster during arousal by simultaneously examining oxygen consumption rate, body temperature ($T_b$) and pectoral electromyography (EMG). We found that Tb of the torpid bats (12-14$^{\circ}C$) was augmented slowly by nonshivering mechanism during the initial awakening phase. The pectoral shivering, gauged by EMG activity, occurred between 17$^{\circ}C$ and 38$^{\circ}C$. Over this Tb range of shivering, heat was produced at a rate of 0.145 kcal $kg^{-1}\;min^{-1}$ to raise 1$^{\circ}C$ $T_b$ per min. Shivering was most intensive at 30-35$^{\circ}C$ where both EMG amplitude and spike frequency were the highest. Activation of the pectoral myofibers seemed to be controlled in a manner that motor units were recruited from smaller to larger sizes, with greater synchronization, as muscle shivering became intensive with increasing $T_b$.

• Journal of Korea Foundry Society
• /
• v.24 no.4
• /
• pp.231-237
• /
• 2004

Bake hardenable steel utilizes the phenomenon of strain aging to provide an increase in the yield strength of formed components. An increase of the carbon content will improve the bake hardening response: more solutes are available to pin mobile dislocations and to form the clusters more rapidly. But aging resistance decrease as increasing solute carbon. In order to under-stand the compatibility between bake hardenability and aging resistance. The optimum solute carbon control methods during manufacture should be determined. In this paper, the effect of continuous heat cycle conditions such as soaking temperature, rapid cooling start temperature, cooling rate on BH(Bake Hardenability), AI(Aging Index), YP-El(Yield Point Elongation) and other mechanical properties have been investigated. and following results were obtained. In the case of soaking temperature, BH increases with higher soaking temperature because of NbC $dissolution(830^{\circ}C)$, Therefore the solute carbon and BH at $850^{\circ}C$ and $870^{\circ}C$ are higher than these at $810^{\circ}C$. But BH at $870^{\circ}C$ is a little lower than that at $850^{\circ}C$ owing to the ferrite grain size. The measurement of amount of dissolution C using IFT(Internal Friction Test) can explain the relation of solute carbon and BH.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2011

The performance and life-cycle costs of electric vehicle(EV) and hybrid electric vehicle(HEV) depend inherently on battery packs. Temperature uniformity in a pack is an important factor for obtaining optimum performance for an EV or HEV battery pack, because uneven temperature distribution in a pack leads to electrically unbalanced battery cells and reduced pack performance. In this work, a three-dimensional modeling was carried out to investigate the effects of operating conditions on the thermal behavior of a lithium-ion battery pack for an EV or HEV application. Thermal conductivities of various compartments of the battery were estimated based on the equivalent network of parallel/series thermal resistances of battery components. Heat generation rate in a cell was calculated using the modeling results of the potential and current density distributions of a battery cell.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.1
• /
• pp.64-68
• /
• 2001

An experimental study on the Joule-Thomson cryocooler with the mixed refrigerant (MR) is described in this paper, J-T refrigeration experiment was performed with a single stage regular air-conditioning compressor The mixed refrigerant in the experiment was composed of 75% mol fraction of $N_2$. 30% moi fraction of CH$_4$. 30% moi fraction of $C_2$H$_{6}$. 10% mot fraction of $C_3$H$_{8}$ and 15% mot fraction of iso-C$_4$H$_{10}$. Oil mist in the MR stream could be eliminated completely by the glass microfiber filter. Since a single stage compressor that had been designed thor R22 is not appropriate for high Pressure ratio of the mixed refrigerant especially during the transient period. two modifications were incorporated to regular J-T refrigeration cycle. First. a Portion of the MR was by-passed at the inlet of the heat exchanger and transferred directly to 7he suction of the compressor in the modified system. Second, a buffer volume was Prepared to change the mass flow rate of refrigerant. The pressure ratio in J-T expansion device was relieved at the beginning of the operation due to the by-Pass scheme. but it gradually decreased during the transient Process as some of the MR component condensed at low temperature. The buffer volume at the suction side was used to increase the MR gas density in the system after the transient cool-down period. Form the experiment with the modified system, the refrigerator could reach the lowest temperature of -152$^{\circ}C$ without cooling load. and about -15$0^{\circ}C$ with 5 W of cooling load . . . .

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2573-2576
• /
• 2013

Rate capability and cyclability of $LiMn_2O_4$ should be improved in order to use it as a cathode material of lithium-ion batteries for hybrid-electric-vehicles (HEV). To enhance the rate capability and cyclability of $LiMn_2O_4$, it was coated with $MnV_2O_6$ by a sol-gel method. A $V_2O_5$ sol was prepared by a melt-quenching method and the $LiMn_2O_4$ coated with the sol was heat-treated to obtain the $MnV_2O_6$ coating layer. Crystal structure and morphology of the samples were examined by X-ray diffraction, SEM and TEM. The electrochemical performances, including cyclability at $60^{\circ}C$, and rate capability of the bare and the coated $LiMn_2O_4$ were measured and compared. Overall, $MnV_2O_6$ coating on $LiMn_2O_4$ improves the cyclability at high temperature and rate capability at room temperature at the cost of discharge capacity. The improvement in cyclability at high temperature and the enhanced rate capability is believed to come from the reduced contact between the electrode, and electrolyte and higher electric conductivity of the coating layer. However, a dramatic decrease in discharge capacity would make it impractical to increase the coating amount above 3 wt %.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.274-282
• /
• 2012

In this paper, we propose the design of lighting control algorithm for intelligent LED lighting system. The proposed lighting control algorithm transmitted to MCU through a data bus the environmental information detected from respectively sensor node. The MCU control software was designed to determine the level maintained to depending on the set control method by comparing the results that calculated the dimming level using a signal value. Also, it was designed to be lighting by cross-performed periodically the rotation and reverse method by created fully symmetrical pattern using the control algorithm to LED lighting device. In this paper, the proposed lighting control algorithm improved the reliability of the data sent by designed the system that can be controlled lighting to stable, and it was maintained the event delivery ratio of 91%. Also, the lighting device was decreased the luminous intensity of 32%, the power consumption of 49%, and heat generation of 32%. As a result, it were could be improved the energy efficiency that the life-cycle of LED has been increased 50%.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.529-539
• /
• 2016

Modeling can be used to understand the atmospheric dispersion of air pollutants scientifically. Recent development of model computation enabled to simulate more diverse area. As flowing out from the emission source, the concentration profiles of air pollutants could be estimated in three dimensional space. This study used CALPUFF diffusion model to predict the diffusion of discharged NO2 and TSP on the atmosphere near a combined heat power plant and incinerator. It was investigated contribution concentration of the surrounding area by sources by comparing the actual measurement results and the results of the modeling. Contribution of emission sources to the local level of NO2 was found quite high particularly at the site, A-3. The estimated results by modelling revealed more significant effect on TSP at A-5.