• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.13-19
• /
• 2010

Due to the rapid spread of mobile handheld devices, industrial demands for micro-scale holes with a diameter of even smaller than $10{\mu}m$ in sapphire/silicon wafers have been increasing. Holes in sapphire wafers are for heat dissipation from LEDs; and those in silicon wafers for interlayer communication in three-dimensional integrated circuit (IC). We have developed a sapphire wafer driller equipped with a 532nm laser in which a cooling chuck is employed to minimize local heat accumulation in wafer. Through the optimization of process parameters (pulse energy, repetition rate, number of pulses), quality holes with a diameter of $30{\mu}m$ and a depth of $100{\mu}m$ can be drilled at a rate of 30holes/sec. We also have developed a silicon wafer driller equipped with a 355nm laser. It is able to drill quality through-holes of $15{\mu}m$ in diameter and $150{\mu}m$ in depth at a rate of 100holes/sec.

• 한국레이저가공학회지
• /
• 제15권2호
• /
• pp.15-20
• /
• 2012

A novel joining technology was developed to compensate the camber in polymers. The preheating laser beam circulates on the joining location and the accumulated heat serves to increase the flexibility of neighboring polymers. The temperature rises up to the glass transient temperature of the polymers and continually loading spring force closes the gap of camber. The irradiated laser was 808nm central wavelength and the power varied between 2Watt and 5Watt. The laps were adjusted between 3 and 10 and the optimum process parameters were 3Watt and 5 laps for the specific application. An FEM analysis was introduced to understand the mechanism of joining by the transient temperature distribution on the polymers. Thermocouples experiments were also tried to correlate the numerical analysis results and it showed the trend of heat accumulation in experiments.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.119-122
• /
• 2009

As architectures have recently become high-risers and mega-structured, stable high strength products have been ensured. Accordingly, use of precast concrete accouplement has been increased in order to facilitate air compression and rationalize construction. Since not only external heating but a1so internal temperature rise caused by the accumulation of cement hydration heat in manufacturing process, precast concrete members with large cross-section used for high-rise mega-structure's columns and beams may exhibit different temperature history compared to the precast concrete members for wall and sub-floor with relatively small cross-sections. Therefore, this study aims to elucidate the characteristics of temperature history of mass concrete members cast with high-strength concrete fur precast concrete application. In this study, large cross-sectional precast concrete mock-up, unit cement quantity, and temperature histories in manufacturing precast concrete member under different curing condition were inclusively investigated.

• 대한한방피부미용학회지
• /
• 제1권1호
• /
• pp.177-197
• /
• 2005

Acute Mastitis(急性乳腺炎=乳癰) is an acute suppurative disease appearing in the breast. It is mostly caused by galactostasis, the stagnation of liver-qi(肝鬱) and stomach-heat(胃熱). It is mostly found in breast feeding women, mostly in primiparae. It usually appears in the third and the fourth weeks of postpartum. At the beginning in the chest there appear induration, distending pain, galactostasis, inversion to cold with fever followed by the enlargement of the masses, burning red, megalgia, not subduing of chills and fever, the accumulation of it to form pus. In the early phase it is advisable to follow the therapeutic principles of soothing the liver and clearing away heat, promoting lactation and subduing swelling. After the formation of pus it is advisable to cut radially and drain the pus. External Therapy(外治法) generally refers to all the methods to treat various diseases and symptoms with application of drugs and manipulation or together with proper instruments on the body surface except the method of taking medicine orally Acute Mastitis has been regarded as surgery or the method of taking medicine orally But, based on many bibliographies, acute mastitis was treated by external therapy. Thus through the historical bibliographic studies of external therapy about acute mastitis, this study was made to help the expanding of the methods of treating acute mastitis.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.37-42
• /
• 2006

전선에서 전압강하는 열 손실을 의미한다. 이 열은 절연체의 특성을 변화시켜 절연성능을 저하시키게 되고 나아가 누전, 감전, 정전 및 화재 등의 사고를 일으키는 원인이 되기도 한다. 그러므로 전압강하에 대한 최적화 설계는 전기설비의 안전성과 경제성을 보장하는 중요한 요소가 되고 있다. 이에 저압의 전기설비인 가로등, 빌딩, 지하철역사 등 공공의 안전확보가 요구되는 다중 분산부하계통에서의 전압강하가 전기배선에 미치는 영향을 분석하고, 안전성 및 경제성 확보를 위한 전압강하산정 프로그램 및 최적화 방안을 연구 제시하고자 한다.

• 한방안이비인후피부과학회지
• /
• 제12권1호
• /
• pp.241-253
• /
• 1999

The results of the study about comparison of Eastern-Western medicine on the Atopic dermatitis were as follows. 1. Atopic dermatitis is chronic eczematous dermatosis which have severe itching, characteristic eruption, easily occur region and pass on chronic relapsing progress and have family history of Atopic disease and hereditary disposition. 2. Atopic dermatitis assume an remarkable clinical aspect and it's diagnosis depends on family history and clinical symptom. 3. In all cases of Western medical treatment is nothing but a symptomatic treatment because can not find out certainly the cause of Atopic dermatitis. 4. Atopic dermatitis is belong to the category of the 'Naesun(내癬)', 'Taeryumchang(胎斂瘡)', 'Samanpoong(四灣風)' etc. in Oriental medicine. 5. The etiology and pathogenesis of Atopic dermatitis in oriental medicine are congenital defect(稟賦不足), internal accumulation of damp and heat(濕熱內鬱), improper diet(飮食不節), exogenous pathogenic factors(外邪侵襲), etc.. 6. The treatments of Atopic dermatitis in oriental medicine are thought effective clear up heat and remove dampness with febrifugal arld diuretic drug(淸熱利濕), invigorate the spleen to resolve dampness(健脾燥濕), nourish Um and blood to relave dryness(滋陰養血潤燥), etc..

• 동의생리병리학회지
• /
• 제20권6호
• /
• pp.1442-1446
• /
• 2006

This study was wrriten in order to to help understanding of Kyeolhyung(結洶). Kyeolhyung is a syndrome of epigastric pain and fullness due to accumulation of pathogen in the chest mostly caused by too early purgation of Taiyang(太陽) channel syndrome which leads to the exterior syndrome of heat from the exterior into the interior or combines with the original excessive fluid of the chest. The knotted chest can be divided into large, small, heat and substantice, cold and substantice, water and blood Kyeolhyung. Kyeolhyung is basically treated by purgation but practically it is treated by according to its own symptom and syndromes. And we were cured of the Kyeolhyung discriminating from Zanggyul(藏結) and Bijeung(비증).

• 한국군사과학기술학회지
• /
• 제24권1호
• /
• pp.79-83
• /
• 2021

The expiration date of high energetic materials(HEM), such as HMX, RDX, TNT, is important. If the expiration date is violated, the expected specification of HEM would not be satisfied which may cause a different conclusion in an urgent situation. As a result, this HEM should maintain fresh conditions which cause the accumulation of waste HEM. If HEM is landfilled during demilitarization, the impact on living organizations is serious. Additionally, landfilling HEM has a possibility of explosion. In this research, the process flow diagram of the demilitarization gas treatment process was simulated while satisfying the law of the environment in Korea. After validation of simulation, it was optimized thermodynamically using Heat Exchanger Network Synthesis(HENs). This study is expected to enhance the energy efficiency of the original facility by suggesting developed designs. This research was supported by Agency of Defense Development NE32 Korea. Thanks to Agency of Defense Development, Korea

• 열처리공학회지
• /
• 제35권4호
• /
• pp.203-210
• /
• 2022

In this study, hydrogen embrittlement in Inconel 718 fabricated by selective laser melting (SLM) was investigated. To focus on the effect of the SLM-induced solidification substructure, hydrogen embrittlement behavior of SLM as-built (SLM-AB) sample and that of conventionally produced (Con-S) sample were systematically compared. The detailed microstructural characterization showed that the SLM-AB sample exhibited a solidification substructure including a high density of dislocations and Laves phase, while the Con-S sample showed completely recrystallized grains without any substructure. Although the intrinsic strength in the SLM-AB sample was higher than the Con-S sample, the resistance to hydrogen embrittlement was higher in the SLM-AB sample. Nevertheless, a statistical analysis of the hydrogen-assisted cracks (HACs) revealed that the predominant HAC type of SLM-AB and Con-S samples was similar, i.e., intergranular HAC. The difference in the resistance to hydrogen embrittlement between the SLM-AB and Con-S samples were discussed in terms of the relation between the microstructural feature and its effect on hydrogen accumulation.

• 열처리공학회지
• /
• 제37권2호
• /
• pp.66-72
• /
• 2024

To investigate the effect of deformation condition on microstructure and texture formation behaviors of AZ91 magnesium alloy with three kinds of initial texure during high-temperature deformation, plane strain compression tests were carried out at high-temperature deformation conditions - temperature of 673 K~723 K, strain rate of 5 × 10^-3s^-1, up to a strain of -1.0. To clarify the texture formation behavior and crystal orientaion distribution, X-ray diffraction and EBSD measurement were conducted on mid-plane section of the specimens after electroltytic polishing. As a result of this study, it is found that the main component and the accumulation of pole density vary depending on initial texture and deformation caondition, and the formation and development basal texture components ({0001} <$10\bar{1}0$>) were observed regardless of the initial texure in all case of specimens.