• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.160-165
• /
• 2011

Monitoring of pesticide residues were conducted at three sites in the Southern Area of Seoul, Korea (Gang-nam, Gang-dong and Song-pa). We measured pesticide residues within soil samples using multi-pesticide residues analysis. Samples were collected at the three sites with 60 sampling spots. The amount of pesticide residues in the soil samples were as follows [(minimum-maximum), mg/kg] endosulfan 0.002-0.999, procymidone 0.002-1.200, diazinon 0.003-0.024, metalaxyl 0.012-0.075. In soil treated with 0.445 mg/kg of endosulfan, the pesticide absorbed by chamnamul, was 0.157 mg/kg (Absorption rate : 35.3%). However, in soil treated with 0.358 mg/kg of endosulfan, the pesticide absorbed by lettuce, was 0.004 mg/kg (Absorption rate : 1.1%).

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.151-160
• /
• 2015

This study was conducted to monitor residual pesticides in perilla leaf & lettuce and to assess their risk to human health. The total number of perilla leaf & lettuce were 4,063 and 2,248 respectively and these products were collected at the Garak-dong Agricultural & Marine Products Market sold by auction from 2010 to 2012. Multi-residual analysis of 285 pesticides were performed by GC-ECD, GC-NPD, HPLC-DAD and HPLC-FLD. In perilla leaf, 61 pesticides were detected and detection rate was 20.0%. 28 pesticides were detected in case of lettuce and detection rate was 4.8%. In order to do risk assessment by perilla leaf & lettuce consumption, estimated daily intake of residual pesticides were determined and compared to acceptable daily intake, referring to hazard index (HI values). The range of % HI values of perilla leaf was from 0.000% to 0.049%. The range of % HI values of lettuce was from 0.000% to 0.095%. These results show that the risk caused by pesticide residues in perilla leaf & lettuce intake were very low and these vegetable intake was safe.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.500-508
• /
• 2020

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16-56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion: We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.305-311
• /
• 2023

Background: The National Institute of Environmental Research (NIER)'s classification of and airborne fraction ratio for consumer chemical products (CCP) does not reflect the characteristics of various product classifications. Objectives: The purpose of this study was to reclassify the types of spray products according to the diverse spray characteristics of CCPs to evaluate the airborne fraction ratio of representative spray types and to compare them with previous CCPs types and airborne fraction ratios. Methods: One thousand seven hundred two products were selected through market research, and 932 newly reported products were selected. After that, 200 were selected to evaluate products with potential inhalation exposure. After classifying six product types that are expected to show differences in the airborne fraction ratio according to the type of product, a final 38 products were selected for use in the airborne fraction ratio through random sampling. Results: CCP has been reclassified from two to six types so that the characteristics of all products are well-reflected. The NIER simply had two airborne fraction ratios, but the results of experiments with six types of products showed a significant difference in values (p<0.01). Airborne fraction ratios of propellant general foam, pump general aerosol, and pump trigger foam in spray type, which were not previously present in NIER, were 7.1%, 24.4%, and 3.5%, respectively. Conclusions: For the diversified types of CCPs, the newly proposed classification was more appropriate than the existing NIER classification. The airborne fraction ratio was also different for each type, so a new value was suggested.

• Safety and Health at Work
• /
• v.15 no.3
• /
• pp.368-372
• /
• 2024

Occupational use of cleaning products can cause asthma in healthcare workers but the cleaning agents responsible are not yet known. This study aimed to identify respiratory and other hazards in cleaning products on the National Health Service (NHS) supply chain online catalogue and used in the NHS. Information on cleaning products, their composition, and H-statements that identified hazard characteristics of chemical substances in them was obtained from chemical safety data sheets (SDSs). Furthermore, a quantitative structure-activity relationship model and a published asthmagen list were used to identify potential additional respiratory hazards. 473 cleaning products and 229 substances were identified. SDSs reported only 4 respiratory sensitizers but an additional 51 were suggested by the other 2 methods. In contrast, 25 respiratory irritants were identified using SDSs and only one from the asthmagen list. This comprehensive overview of cleaning agents' hazards has potential use in future risk assessment and epidemiological studies.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.243-251
• /
• 2020

In this study, we investigated pesticide residues in 207 agricultural products distributed by direct trade in the northern area of Gyeonggi Province. A total of 94 general agricultural products and 113 eco-friendly agricultural products collected from local grocers and cooperative stores were analyzed by multiresidue method for 263 pesticides using GC (gas chromatography)/ECD (electron capture detector), GC/NPD (nitrogen phosphorus detector), GC-MS/MS (tandem mass spectrometry), LC (liquid chromatography)/PDA (photodiode array detector), LC/FLD (fluorescence detector), LC-MS/MS. All samples showing pesticide residues were general agricultural products collected from local food stores. The pesticide residue levels of 14 samples (6.8%) were below the maximum residue limits (MRLs) and one of them (0.5%) exceeded the MRLs. Sixteen pesticides were detected from samples of the following produce items: spinach, young cabbage, perilla leaves, mallow, cucumber, chives and water dropwort. The safety of the detected pesticides was assessed by monitoring the daily intake estimate (EDI) and the daily intake allowance (ADI) based on the amount of pesticides detected. The ADI percentage range (the ratio of EDI to ADI) was 0.0134-61.6259% and there was no health risk connected with consuming agricultural products in which pesticide residues were detected.

• Korean Journal of Food Science and Technology
• /
• v.44 no.3
• /
• pp.378-381
• /
• 2012

The monitoring of the uniconazole residual pesticide for agricultural products was conducted by multiclass pesticide multiresidue methods. Samples were collected from June to November, 2011. Uniconazole pesticide was detected in 49 samples from a total of 3,939 samples. The amount of uniconazole pesticide ranged from 0.09 to 17.89 mg/kg in 49 samples. This method was described for the simultaneous determination of uniconazole by gas chromatography with a nitrogen phosphorus detector (GC-NPD) and mass spectrometry (MS). The limit of detection and quantification were 0.006 and 0.018 mg/kg GC-NPD, respectively. For an evaluation of the GC-NPD method, uniconazole spiked into gyeojachae at a level of 0.5, 5 mg/kg was determined. The recoveries of uniconazole by the GC-NPD method ranged from 83.4 to 101.4%. The results indicate that the method of simultaneous analysis is applicable to uniconazole analysis.

• Journal of Environmental Health Sciences
• /
• v.48 no.4
• /
• pp.206-215
• /
• 2022

Background: Fragrance substances in consumer products can cause adverse health effects such as contact allergy. In South Korea, consumer chemical products must list 26 known fragrance allergens on product labels when they contain more than 0.01%. Fragrance substances are mostly used in combination, so co-exposure can occur via use of a consumer chemical product. Co-exposure to fragrance allergens may show a synergistic effect on the human body. Objectives: The aims of the study were to analyze the characteristics of fragrance allergens in consumer chemical products available on public websites and to identify the co-occurrence patterns of fragrance allergens. Methods: The chemicals in 1,443 ingredient disclosures for consumer chemical products were collected through the Ecolife database. The 26 labelled fragrance allergens were identified by category of consumer chemical product. The co-occurrence patterns of the 26 labelled fragrance allergens were analyzed by frequent pattern mining. The unlabelled fragrance allergens presented by European Union Scientific Committee on Consumer Safety were also identified. Results: Consumer chemical products contained an average of 5.3±4.2 substances among the 26 labelled fragrance allergens. More than 85% of air fresheners, deodorizing agents, and fabric softeners contained at least one of the 26 labelled fragrance allergens. The most frequently contained fragrance allergens were limonene (50.5%), linalool (49.9%), hexyl cinnamal (34.0%), and citronellol (28.3%). 16.7% of consumer chemical products showed a co-occurrence of limonene, linalool, hexyl cinnamal, and citronellol. Thirty-eight unlabelled fragrance allergens were found in the consumer chemical products, with hexamethylindanopyran (25.2%) being the most frequently contained substance. Conclusions: The characteristics and co-occurrence patterns of 26 labelled fragrance allergens would be useful information for the management of co-exposure to fragrance allergens in consumer chemical products. It is necessary for attention to be paid to unlabelled fragrance allergens.

• Korean Journal of Veterinary Service
• /
• v.31 no.2
• /
• pp.239-254
• /
• 2008

This study was conducted in order to get basic data on standards and specifications of health and functional foods. A total of 101 kinds of functional healths foods were examined during the period of January to December 2005. Among them, 89 kinds were local products and 12 kinds were imported products. Test items were 6 kinds of heavy metals (lead, cadmium, mercury, copper, zinc and manganese), 5 bacteria (common bacteria, coliform group, E coli, Bacillus cereus and Clostridium perfringens), and 6 preservatives (sorbic acid, benzoic acid, DHA, ethyl paraben, propyl paraben and butyl paraben). As a result of heavy metals, cadmium, was detected from the glucosamine products by 1.52ppm in average, mercury from cereal products by 0.004ppm in average, and lead from chlorella foods by 3.48ppm in average. Bacteria were identified from 3 cereal products, and amount of common bacteria were about $4.8{\times}105cfu/g$ in average. E Coli and Coliform group were isolated from 2 products and 4 products, respectively. All of those products were flour meal products. Any of 6 kinds of preservatives was not detected from all the products. It is thought that these test results will be available as basic data for enactment of relevant laws and regulations for production and control of safer and more hygienic foods in the future because the standards of the harmful heavy metals are not complete or available yet according to the Food Sanitation Law and the Functional Healths Foods Law.

• Journal of Environmental Health Sciences
• /
• v.48 no.1
• /
• pp.36-43
• /
• 2022

Background: Preservatives are used to prevent product deterioration in modeling clay. Parabens, a representative preservative, have been found to be endocrine disruptors and cause skin irritation and allergic reactions. Isothiazolinone preservatives can be irritating to the skin, respiratory tract, and eyes. Thorough investigation and regulation of clay are necessary because clay is marketed to children, who are more sensitive to the toxic effect of chemicals. Objectives: In this study, the presence of 16 preservatives was analyzed in modeling clay and the results were compared with current standards. Methods: A total of 200 samples were collected from 28 children's clay products sold in South Korea (13 from Korea and 15 imported from overseas). Twelve preservatives, such as parabens, were analyzed using high-performance liquid chromatography (HPLC). Isothiazolinone preservatives (chloromethylisothiazolinone; CMIT, methylisothiazolinone; MIT, octylisothiazolinone; OIT, and benzisothiazolinone; BIT) were analyzed using ultra performance liquid chromatography-tandem mass spectrometery (UPLC-MS/MS). Results: Dehydroacetic acid (DHA) was detected the most in the clays at 51.50% (103 cases) detection; 38 cases (median 190.42 ㎍/g) in Korean products and 65 cases (median 169.62 ㎍/g) in Chinese products. CMIT, which is prohibited in Korea, was detected in 14 (median 16.28 ㎍/g) Chinese products. OIT, which has a chemical structure similar to CMIT was found in 28 (median 68.38 ㎍/g) samples in Korean products. Conclusions: The use of CMIT and MIT in children's products is prohibited in Korea and the European Union (EU). The detection of CMIT in Chinese clay products suggests that management is necessary for imported products. It is necessary to review the safety and regulatory status for OIT because OIT was used as a substitute for CMIT and MIT in Korean products.