• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.243-247
• /
• 2008

Purpose: For a proper wound care, the correct evaluation of wound is very important. Usually the evaluation of wound was subjective, and as a result, wound care was empirical. There were many attempts to objectify the wound evaluation, and one of them was measurement of the wound pH. The purpose of this study is to observe the wound pH changes during wound healing phase. Methods: From 2005 to 2007, we measured the pH values of 6 acute wounds, which were split thickness skin graft donor sites. In addition, we measured the pH values of 18 chronic wounds, which were 17 pressure sores and 1 tuberculosis ulcer. After pH meter ($SkinCheck1^{(R)}$, Hanna Instruments, Italy) was calibrated, wound pH was checked. Wound was cleansed with saline gauze and dressed with polyurethane foam dressing($Medifoam^{(R)}$, Biopol, Korea). Results: In split thickness skin graft donor sites, the pH raised(mean pH value: $7.45{\rightarrow}7.62$) when the wound was on the process of healing(*p=0.027, analysis of Wilcoxon signed-rank test). If wound became re-epithelialised, the pH value dropped to that of normal skin. However, we could not find a relation between time and the pH values in chronic wound. Conclusion: We could observe the consistent wound pH changes during wound healing phase in acute wound.

• Journal of Periodontal and Implant Science
• /
• v.43 no.6
• /
• pp.291-300
• /
• 2013

Purpose: Calcium phosphate (CaP)-coated implants promote osseointegration and survival rate. The aim of this study was to (1) analyze the dissolution behavior of the residual CaP particles of removed implants and (2) evaluate bone apposition of CaP-coated machined surface implants at the early healing phase. Methods: Mandibular premolars were extracted from five dogs. After eight weeks, the implants were placed according to drilling protocols: a nonmobile implant (NI) group and rotational implant (RI) group. For CaP dissolution behavior analysis, 8 implants were removed after 0, 1, 2, and 4 weeks. The surface morphology and deposition of the coatings were observed. For bone apposition analysis, block sections were obtained after 1-, 2-, and 4-week healing periods and the specimens were analyzed. Results: Calcium and phosphorus were detected in the implants that were removed immediately after insertion, and the other implants were composed mainly of titanium. There were no notable differences between the NI and RI groups in terms of the healing process. The bone-to-implant contact and bone density in the RI group showed a remarkable increase after 2 weeks of healing. Conclusions: It can be speculated that the CaP coating dissolves early in the healing phase and chemically induces early bone formation regardless of the primary stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.131-138
• /
• 1999

The purpose of this study is to evaluate the effects of resorbable plate in the healing process of mandibular fracture. Reduction and rigid fixation was carried out on the artificial mandibular fracture site of the rabbits, using a resorbable screw, 1.5mm in diameter and 4.0mm in length, and an absorbable plate 1.5mm in thickness(Lactosorb$^{(R)}$). En block tissue specimens with plate were taken from the rabbits at 4, 6, 8, and 10 weeks intervals and specimen were observed with light microscope under the hematoxylin-eosin staining, to observe the inflammatory reaction and tissue healing process. The following conclusions were drawn: 1. The subject displayed good healing with no signs of detachment of the fixation plate. 2. At 4 weeks, the plate was covered by the connective tissue. Then at 6 weeks, bone regeneration was discovered around the plate. 3. During the period of healing, no inflammatory reaction or foreign body reaction, as a result of using resorbable plate, were observed. 4. At 8 weeks, the initial phase of the absorption of the plate was observed. Then at 10 weeks, macrophage were observed around the plate, indicating the absorption phase was in process. From the above results, it can be determined that when the resorbable plate is applied to rabbit, full recuperation occurs naturally in the absence of inflammatory reaction and foreign body reaction. The selected study is clinically valuable in proving this procedure.

• Journal of Korean Dental Science
• /
• v.9 no.2
• /
• pp.55-62
• /
• 2016

Purpose: Alveolar bone develops with tooth eruption and is absorbed following tooth extraction. Various ridge preservation techniques have sought to prevent ridge atrophy, with no superior technique evident. Collagen has a long history as a biocompatible material. Its usefulness and safety have been amply verified. The related compound, atelocollagen, is also safe and displays reduced antigenicity since telopeptides are not present. Materials and Methods: The current study evaluated whether the $Rapiderm^{(R)}$ atelocollagen plug (Dalim Tissen, Seoul, Korea) improves tissue healing of extraction sockets and assessed the sequential pattern of bone regeneration using histology and microcomputed tomography in six beagle dogs. To assess the change of extraction socket, hard tissues were examined 2, 4, 6, and 8 weeks after tooth extraction. Result: The experimental groups showed better bone fill with slow remodeling process compared to the control groups although there was no statistical difference between groups. Conclusion: The atelocollagen seems to have a tendency to slow bone remodeling in the early phase of healing period and maintain remodeling capacity until late phase of remodeling. Also, use of atelocollagen increased the bone-to-tissue ratio compared to healing of untreated extraction socket.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.236-244
• /
• 2018

In this study, we tried to fabricate self - healing microcapsules using liquid inorganic materials which can be mixed directly with cement composites. The basic properties of the liquid inorganic material were evaluated and microencapsulation was performed. The focus of this paper is on the quality and manufacturing characteristics of cement composites rather than the healing effects of self - healing microcapsules according to mixed capsules. Test results, the self-healing microcapsules encapsulate liquid inorganic material which is stable at room temperature and has high crack followability, and the yield is over 90%. The size of self - healing microcapsule was able to change according to the synthetic agitation speed and it was able to secure more than 70% of target size. In addition, the loss of less than 10% was found to occur through the membrane strengthening of self - healing microcapsules, and it could be reduced by 50% compared with the case without membrane strengthening.

• Journal of Periodontal and Implant Science
• /
• v.44 no.5
• /
• pp.242-250
• /
• 2014

Purpose: This study aimed to evaluate the effects of fibronectin and oxysterol immobilized on machined-surface dental implants for the enhancement of cell attachment and osteogenic differentiation, on peri-implant bone healing in the early healing phase using an experimental model in dogs. Methods: Five types of dental implants were installed at a healed alveolar ridge in five dogs: a machined-surface implant (MI), apatite-coated MI (AMI), fibronectin-loaded AMI (FAMI), oxysterol-loaded AMI (OAMI), and sand-blasted, large-grit, acid-etched surface implant (SLAI). A randomly selected unilateral ridge was observed for 2 weeks, and the contralateral ridge for a 4-week period. Histologic and histometric analyses were performed for the bone-to-implant contact proportion (BIC) and bone density around the dental implant surface. Results: Different bone healing patterns were observed according to the type of implant surface 2 weeks after installation; newly formed bone continuously lined the entire surfaces in specimens of the FAMI and SLAI groups, whereas bony trabecula from adjacent bone tissue appeared with minimal new bone lining onto the surface in the MI, AMI, and OAMI groups. Histometric results revealed a significant reduction in the BIC in MI, AMI, and OAMI compared to SLAI, but FAMI demonstrated a comparable BIC with SLAI. Although both the BIC and bone density increased from a 2- to 4-week healing period, bone density showed no significant difference among any of the experimental and control groups. Conclusions: A fibronectin-coated implant surface designed for cell adhesion could increase contact osteogenesis in the early bone healing phase, but an oxysterol-coated implant surface designed for osteoinductivity could not modify early bone healing around implants in normal bone physiology.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.69.1-69
• /
• 2003

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.103-108
• /
• 2023

In this study, basic research was conducted to secure microbial resources applicable to autonomous crack healing concrete. To this end, in this experiment, biomineral-forming microorganisms were separated from natural sources, and the ability of survival in cement and calcium carbonate precipitation were compared to secure suitable microbial resources. Bacillus-type bacteria forming endospores were isolated from the sample, and the amount of calcium carbonate produced by the six microorganisms identified by 16S rRNA sequencing was compared. Two types of microorganisms, Bacillus velezensis and Bacillus subtilis, with the highest calcium carbonate precipitation were selected, and the survival of the microorganisms was confirmed through phase contrast microscopy after being cured after being added to the mortar. In addition, it was confirmed that the autonomous crack healing capability by the crack healing material produced by microorganisms was confirmed by artificially generating cracks in the mortar.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.40.2-40.2
• /
• 2009

Using the favorable resorption behavior of amorphous Calcium phosphate (CaP) we fabricated a gelatin basednano fibrous mat by electrospinning for using as a fast healing patch for minorbone defects. Bone is predominantly formed by an inorganic phase of nano-crystalline HAp materials and nano fibrous protein material of collagen. The osteoblast cells, which are the bone formation cells and are key to the new bone formation, receive these materials to form new bone. Taking these considerations we make a new nano fibrous mat of amorphous CaP and gelatin, which is derived from collagen itself. A polymer carrier of poly caprolactone(PCL) was used in the system to stabilize the materials in biological condition. The electrospinning conditions were optimized for smooth mat without any droplet formation. The fabricated mat was characterized for its morphologyby SEM. Mechanical properties like tensile strength was evaluated. To investigate the bio-compatibility we performed the MTT assay and investigated its resorption behavior and apatite formation behavior by SBF immersion.

• Corrosion Science and Technology
• /
• v.19 no.1
• /
• pp.37-42
• /
• 2020

Even though 304 low-carbon (304L) stainless steel was developed to enhance the resistance to intergranular corrosion and stress corrosion cracking, it is occasionally subject to degradation in harsh environments. The degree of sensitization (DOS) of 304L stainless steel was studied as a function of sensitization using a double-loop electrochemical potentiokinetic reactivation (DL-EPR) method. Sensitizing heat treatment was performed in an Ar atmosphere at 500℃, 600℃, and 700℃, with heat treatment times varying from 0 to 96 h. DOS was measured by the ratio of the peak current density value of the forward scan to that of the reverse scan. After the EPR experiment, the specimen surface was observed by scanning electron microscopy and energy dispersive spectroscopy. The DOS of the specimens heat-treated at 600℃ increased with heat treatment times up to 48 h and then decreased due to a self healing effect. The DOS was higher in specimens heat-treated at 600℃ than those at 500℃ or 700℃. Corrosion of the sensitized specimens occurred mainly at the δ-γ phase boundary. The corrosion morphology at the δ-γ phase boundary changed with sensitizing heat-treatment conditions due to differences in chromium activity in γ austenite and δ ferrite.