• The Korean Journal of Emergency Medical Services
• /
• v.20 no.1
• /
• pp.7-15
• /
• 2016

Purpose: There are few studies on the quality of cardiopulmonary resuscitation (CPR) performed by a single rescuer using a bag-valve-mask device. The aim of this study is to compare CPR quality outcomes according to the rescuer's position or mask fixation grip method and to determine the optimal means of achieving therapeutic goals. Methods: The three CPR methods were defined as over-the-head, lateral-superior, and lateral-inferior, depending on the rescuer's position or mask fixation hand placement. CPR quality was estimated for 83 paramedic students who performed 5 minutes of CPR in a randomized sequence on a manikin using each of the three methods. Results: The over-the-head method showed no advantage for cardiac compression and ventilation quality, but minimized the rescuer's fatigue score. Conclusion: In contrast to previous studies or prevailing beliefs, the lateral-superior position is optimal for achieving therapeutic goals with moderate or minimal rescuer fatigue.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.2
• /
• pp.68-79
• /
• 2014

The type of turbine developed is based on the very low head of water potential source for the electric power production. The area of research is focused for the axial water turbine that can be applied at the simple site open channel with has a very low cost and environmental impact compared to the conventional hydro installation. High efficiency of axial turbine which applied to the very low potential head will made this type of turbine can be used at wider potential site. Existing irrigation weir and river area will be the perfect site for this turbine. This paper will compare the effects of the variation of swirl velocity criterion during the design of the blade of guide vane and rotor of the turbine. Effects of the swirl velocity criterion is wider known as a vortex conditions (free vortex, force vortex and swirl velocity constant), and the free vortex is the very popular condition that applied by most of turbine designer, therefore will be interesting to do a comparison against other criterion. ANSYS Fluent will be used for simulation and to determine the predictive performance obtained by each of design criteria.

• The Journal of Korean Physical Therapy
• /
• v.30 no.6
• /
• pp.218-223
• /
• 2018

Purpose: The purpose of this study was to evaluate the impact of active vibration exercise on the neck pain, disability index, and muscle activity of patients with forward head posture. Methods: A total of 24 patients were randomly assigned to an experimental group or a control group (n=12 each). The experimental group performed active vibration exercise using a flexi-bar for 20 minutes a day, five times a week for four weeks. The study measured patient neck pain using a visual analog scale, neck pain related disability using the neck disability index, and muscle activity using electromyography. Results: The intragroup comparison showed significant differences in the visual analog scale score, neck disability index score and upper trapezius, lower trapezius and serratus anterior muscle activity values among patients in the experimental group. The intergroup comparison showed that differences in the visual analog scale score, neck disability index score and upper trapezius, lower trapezius and serratus anterior muscle activity values in the control group. Conclusion: This study showed that active vibration exercise was effective in improving the neck pain, disability index, and muscle activity of patients with forward head posture.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.147-151
• /
• 2011

We were analyzed the piezoelectric characteristic for electronics printing to inkjet printing system. These applications were possible use to Actuator, MEMS, FPCB, RFID, Solar cell and LCD color filter etc. Piezoelectric print head is firing from ink droplet control consideration ink viscosity properties. At this time, micro pattern for PCB metal printing was possible by droplet control of piezoelectric driving. These driving characteristics are variable voltage pulse waveform. We are used the piezoelectric analysis software of Finite Element Method (FEM), Piezoelectric design parameters are acquired from piezoelectric analysis, and measurement of piezoelectric. It designed for piezoelectric head to possible electric print pattern of inkjet printing system. For this validity we were established through in comparison with simulation and measurement. Designed piezoelectric specification obtained voltage 98V, firing frequency 10 kHz, resolution 360dpi, drop volume 20pl, nozzle number 256, and nozzle pitch 0.33 mm.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.187-192
• /
• 2010

Background and Objectives : LED(Light emitting diode) is recently introduced as a energy-saving light source in many area including agriculture and environment. In medical field it is known as bright and safe light source in surgical lighting including headlight. This study is aimed to test effectiveness and cost-saving of mountain-climbing headlight in comparison with xenon headlight. Materials and Methods : Internet market-available mountain-climbing headlight was compared with medical xenon headlight regarding heat generation after 30 minutes' usage, intensity of illumination and possible burn to the perioral skin. To get temperature data, 5 cases of tonsillectomy were done with the aid of LED headlight, while another 5 tonsillectomies were done using xenon headlight. Results : The temperatures of all light sources were below 45 degrees Celcius until finish of the surgery without burn or complications. No differences in operation time with both headlights. The maximal intensities of illumination were 24000 Lux for xenon, 20000 Lux for LED. Conclusion : Mountain-climbing headlight could be safe and helpful light source with low cost in simple oral surgery.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.920-927
• /
• 2008

This study deals with modeling of Head-Related Transfer Functions (HRTFs) using Principal Components Analysis (PCA) in the time and frequency domains. Four PCA models based on Head-Related Impulse Responses (HRIRs), complex-valued HRTFs, augmented HRTFs, and log-magnitudes of HRTFs are investigated. The objective of this study is to compare modeling performances of the PCA models in the least-squares sense and to show the theoretical relationship between the PCA models. In terms of the number of principal components needed for modeling, the PCA model based on HRIR or augmented HRTFs showed more efficient modeling performance than the PCA model based on complex-valued HRTFs. The PCA model based on HRIRs in the time domain and that based on augmented HRTFs in the frequency domain are shown to be theoretically equivalent. Modeling performance of the PCA model based on log-magnitudes of HRTFs cannot be compared with that of other PCA models because the PCA model deals with log-scaled magnitude components only, whereas the other PCA models consider both magnitude and phase components in linear scale.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.975-978
• /
• 2012

P63 is a gene product required in cell cycle regulation which plays vital roles in tumor differentiation. Aims of the present study were to assess the frequency, pattern, sensitivity and specificity of two p63 protein clones P63 4A4 and P63 4A4+Y4A3 in squamous cell carcinomas (SCCs). Thirty cases of head and neck region SCC diagnosed on the basis of H&E staining were examined along with 60 cases of head and neck region biopsies other than squamous cell carcinoma, negative on H&E staining, were taken as control. Immunostaining was performed on slides according to the Thermo Scientific UltraVision LP detection System. P63 4A4+Y4A3 clone is more sensitive 96.6% in comparison to 86% in P63 4A4 with having greater NPV of 98.3%. The results signify the importance of P63 4A4+Y4A3 marker over the old markers and may be used as a confirmatory marker of squamous cell carcinoma.

• Korean Journal of Head & Neck Oncology
• /
• v.4 no.1
• /
• pp.5-11
• /
• 1988

CT examination has been used in the preoperative examination of patients with head and neck cancer. The accuracy of CT in detecting nodal metastases has not been well established. We studied 35 patients (41 neck specimens) with head and neck cancer who underwent neck dissection. Surgical pathologic findings were compared with preoperative CT scan to establish the diagnostic accuracy for cervical lymph node metastases. The results of physical examination, CT scans of neck and histologic examinations were compared each other. The overall diagnostic accuracy of CT was 83.3%. Comparison with clinical accuracy shows the CT scan to be superior to the clinical examination in spite of careful physical examination, particularly in detecting occult metastases.

• Journal of Institute of Convergence Technology
• /
• v.1 no.1
• /
• pp.34-40
• /
• 2011

In this paper, a hybrid design tool combining one-dimensional(1D) lumped model and three-dimensional computational fluid dynamics(CFD) approach has been developed in order to evaluate the performance of inkjet print head and droplet control process are studied to reduce the deviations between nozzles which affect the size of the printed line for the industrial application of direct writing on printed circuit boards(PCB). 1D lumped model analysis shows that it is useful tool for evaluating performance of an inkjet head by varying the design parameters. The differences in ejected volume and droplet velocity between analytical and experimental result are within 12%. Time sequence of droplet generation is verified by the comparison between 3D analysis result and photographic images acquired by stroboscopic technique. In addition, by applying DPN process, velocity and volume uniformity between nozzles is dramatically improved that the tolerance achieved by the piezoelectric inkjet printhead across the 64 nozzles is 5 to 8%. A printed line pattern is successfully obtained using the fabricated inkjet print head and droplet calibration system.

• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.91-97
• /
• 2018

Purpose: The purpose of this study was to observe the effects of sport massage and McKenzie stretch exercise on forward head posture. To understand the effect, this study measured and analyzed body alignment of the neck. Methods: In this study, a total of 14 subjects with forward head posture were analyzed. Subjects were divided into two groups: group 1 (n=7) received a McKenzie stretch exercise and group 2 (n=7) received a McKenzie stretch exercise and a sport massage. The McKenzie stretch exercise was performed three times a week, for four weeks, while the sport massage was performed once a week. The body alignment of the neck (CVA, CRA) was measured using a goniometer. Results: The improvements in neck body alignments (CVA, CRA) after the McKenzie stretch exercise and sport massage were both significant (group 1: p<0.05; group 2: p<0.05), whereas the between-group comparison found no significant differences. Conclusions: In conclusion, our study confirmed that the McKenzie stretch exercise and sport massage had a significant positive effect on the body alignment of the neck. However, a study that included a greater number of subjects and a long-term treatment period is needed to generalize these results.