• 음성과학
• /
• 제7권4호
• /
• pp.59-72
• /
• 2000

Vocal tract resonances are of paramount importance to voice sounds. Resonance frequencies determine vowel quality and the personal voice timber. The aim of this study was to make an effective diction program according to tuning formant frequencies by adjusting the vocal tract shape in professional voice users. Twelve male student singers and eleven female student singers participated in this study. The subjects repeated five simple vowels /a, e, i, o, u/ in normal speech and singing. The spoken vowels and sung vowels were measured by formant frequencies and the singer's formant frequencies using CSL and DSP Sona-Graph. Separately, Plot formants program was used to draw the vowel chart. The results were as follows. (1) Total formant frequencies of female singers were 11% higher than those of males singers in singing. (2) The F1 and F3 of sung vowels increased compared to F1 and F3 spoken vowels. However, The F2 of sung vowels decreased in comparison with F2 of spoken vowels. (3) Posterior vowel /u/ were moved anteriorly. This phenomenon seemed to be due to head voice singing training. (4) Singer's formant frequencies in student singers appeared according to the part: 2560 Hz for baritone, 2760 Hz for Tenor, 2821 Hz for Mezzo soprano and 3420 Hz for soprano.

• Journal of Radiation Protection and Research
• /
• 제36권3호
• /
• pp.107-118
• /
• 2011

Conventional (SRS) and fractionated (FSRS) stereotactic radiosurgery necessarily require stringent overall target point accuracy and precision. We determine three-dimensional intracranial target point deviations (TPDs) in a whole treatment procedure using magnetic resonance image (MRI)-based polymer-gel dosimetry, and suggest a technique for overall system tests. TPDs were measured using a custom-made head phantom and gel dosimetry. We calculated TPDs using a treatment planning system. Then, we compared TPDs using mid bi-plane and three-dimensional volume methods with spherical and elliptical targets to determine their inherent analysis errors; finally, we analyzed regional TPDs using the latter method. Average and maximum additive errors for ellipses were 0.62 and 0.69 mm, respectively. Total displacements were 0.92 ${\pm}$ 0.25 and 0.77 ${\pm}$ 0.15 mm for virtual SRS and FSRS, respectively. Average TPDtotal at peripheral regions was greater than that at central regions for both. Overall system accuracy was similar to that reported previously. Our technique could be used as an overall system accuracy test that considers the real radiation field shape.

• Clinical and Experimental Reproductive Medicine
• /
• 제27권3호
• /
• pp.301-305
• /
• 2000

Globozoospermia is a rare type of teratozoospermia. It occurs in 0.1% of all andrological patient's and used to be considered sterile. Globozoospermic patient has 100% round headed spermatozoa, but the spermiogram is normal. The spermatozoa show oval-shape head, the lack of a nuclear envelope, acrosome, and post acrosomal sheath. Objective: To report that a couple with infertility secondary to globozoospermia received ICSI treatment. Material and Method: Case report Results: In the first trial, fertilization was failed. In the second trial, 40% of oocytes were fertilized and all of these embryos were cleaved, but pregnancy did not achieved. In the third trial, sperm injected oocytes were exposed to 10 ${\mu}M$ calcium ionophore for 15 min. All of the injected oocytes were fertilized and proceeded to develop. Triplet pregnancy was achieved after the transfer of six embryos in their third cycle. One embryo vanished and the remaining twins (female) were delivered at 33 weeks of gestation by Caesarean section. Conclusion: This result shows that assisted activation following ICSI may overcome infertility associated with globozoospermia.

• 한국항해항만학회지
• /
• 제36권2호
• /
• pp.97-103
• /
• 2012

Overtopping Wave Energy Convertor (OWEC) is an offshore wave energy convertor, which comprises the circular ramp and reservoir. It collects the overtopped waves and converting water pressure head into electric power through the hydro-turbines installed in the vertical duct, which is fixed in the sea bed. The performance of OWEC can be represented by the operating water heads of the device, which depends on the amount of the wave water overtopping into the reservoir. In the present paper, the reservoir with the duct connecting to the sea water are studied in the 3D numerical wave tank, which has been developed based on the computational fluid dynamics software Fluent 6.3. Both the overtopping motion and the discharges of the reservoir are investigated together, and several shape parameters and incident wave conditions are varied to demonstrate their effects on the performance of OWEC.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.677-688
• /
• 1997

The purpose of this study was to find out the symbolism of religious costume which has showed the religious belief system through costume practice and culture. Indian Religious costume each has its own mark was investigated in this study. In India, religion is a way of life. It is an integral part of the entire Indian tradition. The results were as follows; India's several main religions are Hinduism(About 80% of population) , Islam (About 11% of population) , Sikhism(less than 2% of population) , Jainism(less than 1% of population) , Buddhism(less than 1% of population) and Christianity(About 3% of population but excluding here) Religious faith system which symbolized Godhood, spiritualty, ascetics, restraint, chastity, sacred and dignity gave a certain shape to each color, ornaments, dressing and marking of religion costume. In connection with religion costumes, there were Hindu's Tika, sacred ash, long hair, knot and holy band (Yajnopavita) , Buddhist's kayysa and tonsures, Jams' no covering, Muslim's chador and skullcap, Sikh's turban (with no cutting hair) , comb, steel bracelet, drawers, sword or dagger. The characteristics, head especially of thebody and white in the colors were made much account for India religion costume. Traditional costume seems to be worn at the present times in India. But apparently these costume associated with religion costume because of Hindu more than 80% of population.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.121-129
• /
• 2006

An Intake Port of SI engines plays a key role on improving engine performance by maximizing full load volumetric efficiency or by optimizing in-cylinder air motion. However, designing an intake port has been usually performed based on port experts' experience and know-how, which means that analytical analyses are relatively insufficient. In this paper, port design parameters which decide an overall port shape were defined in order to correlate them relevantly with flow test results accumulated so far. Test species were composed of all twenty eight SI engines which cover major engine displacements from 1,000cc to 4,000cc. First, they were tested on a steady state flow test rig to find out their flow coefficients. Secondly, those flow coefficients were analyzed based on the port design parameters measured from the engines. The most effective parameters were port height, valve head diameter, and the ratio of port size and cylinder bore diameter. The final correlation equation could predict flow coefficients within 2% deviation.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.667-676
• /
• 2002

Many studies on the finite element modeling for bolted joints have proceeded, but the structures with bolted joints are complicated in shape and it is difficult to find out the characteristics according to joint condition. Usually, experimental methods have been used for bolted joint analysis. A reliable and practical finite element modeling technique for structure with bolted joints is very important for engineers in industry. In this study, three kinds of model are presented; a detailed model, a practical model and a simple model. The detailed model is modeled by using 3-D solid element and gap element, and the practical model is modeled by using shell element (a portion of bolt head) and beam element (a portion of bolt body), the simple model is modeled by simplifying practical model without using gap elements. Among these models, the simple model has the least degree of freedom and show the effect of memory reduction of 59%, when compared with the detailed model.

• 정보저장시스템학회논문집
• /
• 제2권1호
• /
• pp.32-37
• /
• 2006

The recording density of a hard disk drive(HDD) has been increased so rapidly that the storage capacity of a commercial HDD for the personal computer already reaches several hundred giga-bytes recently. Many technologies related to the HDD, such as servo, media, actuator dynamics, thermo and fluid dynamics, etc. must be developed together to realize higher recording density. Especially, airflow inside the HDD cavity has been concerned as the rotational speed of the disk increases. Typical problem due to the airflow is the off-track vibration of a head stack assembly(HSA) as the airflow collides with the E-block, suspensions, and sliders, i.e., the flow induced vibration(FIV). This problem is one of the most significant sources of the track mis-registration(TMR) so that it must be resolved. In this study, disk damper shape is modified to minimize the influence of airflow on the HSA. Modified disk dampers, which change the flow field of the inside cavity of a HDD, show good effects not only on the disk vibration but also on the off-track vibration of a HSA. Vibrations of E-block and slider have been measured with LDV and the airflow field inside the HDD cavity has been analyzed with commercial CFD program to verify these effects.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.253-257
• /
• 2011

고체로켓에서 발생하는 vortex shedding 현상 중 인히비터로 인해 발생하는 연소실내 와류(vortex)의 특성을 조사하기 위해 Large Eddy Simulation을 수행하였다. 해석의 결과는 기존 연구자들의 결과와 잘 일치하며 정략적 및 정성적 분석을 수행하였다. 인히비터 후방에서 발생하는 vortex는 Flow-acoustic coupling 에 의해 주기적으로 반복되며 생성, 소멸이 이루어지는 것을 확인 할 수 있었으며, 발생 주기는 연소실내 mode 2의 주파수와 일치하는 것을 확인하였다. 3차원 해석결과 인히비터 후방에서 Roll 발생은 비균일한 노즐 유동을 발생시킨다.

• 설비공학논문집
• /
• 제25권5호
• /
• pp.246-254
• /
• 2013

Some characteristics of nitrogen-water slug flow were optically measured, in vertical acrylic tubes of 2, 5 and 8 mm diameter. Bubble velocity, bubble and unit cell lengths were measured, by analyzing the light intensity signals from two sets of dot laser-infrared sensor modules mounted along the transparent tubes. Optical images of the bubbles were also taken and analyzed, to measure bubble shapes and liquid film thickness. It was found that the measured bubble velocities were in good agreement with the empirical models in the literature, except for those measured under high superficial velocity condition in the 2 mm tube. Bubble length was found to be the longest in the 2 mm tube, being 4 to 5 times those of the other tubes. Liquid film was found to have developed early in the 2 mm tube, which made the blunt shape of the bubble head. Liquid film thickness in the 8 mm tube was measured at almost twice those of the other tubes.