• 복식
• /
• 제55권4호
• /
• pp.138-150
• /
• 2005

Phrygia headgear has an important meaning from the perspectives of costume history and cultural exchanges in ancient times. This study is to investigate the prototype of Phrygia headgear through analysis of its manufacturing methods and styles on the basis of prior studies on ancient sculptures and literatures conducted by European researchers and to examine its history and meanings. In these ways, this study will be helpful in understanding the importance of Phrygia headgear in cultural exchanges between the East and the West. Results of this study can be summarized as follows: Phrygia headgear was orn by eastern tribes, so it was a symbol of those from the east in ancient times. Phrygia headgear is frequently found in Greek artistic works of 5th to 4th century BC that depicted eastern tribes. Also, this headgear can be observed in artistic works for Mithras, Attis, or other gods. Since Phrygia headgear's shape is similar to that of Homer's helm, many researchers believe that it might be originated from Homer's helm. This headgear made of oxen scrotum(stierbeutel) or its surrounding skin has a long end at the top. This long end is round and drooping toward the front side. From such unique shape, we top. This long end is round and drooping toward the front side. From such unique shape, we top. This long end is round and drooping toward the front side. From such unique shape, we can draw a conclusion that Phrygia headgear was made of oxen scrotum and its surrounding skin. Dependingy on drooping patterns, there are various shapes, such as the round, tightly swollen one worn by Mithras, the tongue-shaped one found in Basilika S. Apolinare Nuovo's mosaic depicting three wise men, the balloon-shaped one frequently found in Greek vases depicting Scythian, and the one drooping to the side depicted in Alexandersarkophag. Further, some Phrygia headgear has covers for neck and ears. For example, Phrygia headgear worn by Persian Satrap tribe has such covers attached to the head part. Meanwhile, Phrygia headgear worn by Amazone tribe does not show such separate covers, Rather, one piece of oxen skin was tanned and finished to make such covers. Wearing Phrygia headgear can be interpreted in several ways. Use of animal's skin for wearing things is a unique aspect in ancient societies because they believed that wearing animal skin would give them power of the animal. Further, Phrygia headgear made of oxen scrotum was a symbol of reproductive power to women.

• 한국터널지하공간학회 논문집
• /
• 제19권6호
• /
• pp.887-903
• /
• 2017

터널이 시공되는 환경은 다양하여 지형이 평탄하지 않거나 지표가 경사가 진 경우가 많으며, 이런 경우에는 지반내 응력의 분포가 일정하지 않다. 그러므로 이와 같은 환경에서는 얕은 터널 굴착에 따라 종방향 하중전이 특성이 달라서 그 영향이 불명확하다. 또한, 시공방법이나 지반조건 및 굴진면의 변위형태 등이 종방향 하중전이 발생경향에 영향 줄 것이므로, 이를 종합적으로 고려한 연구가 필요하다. 따라서 본 연구에서는 지반의 경사를 $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$로 모사하고, 굴진면의 변위형태(상부 큰 변위, 등변위, 하부 큰 변위)에 따른 굴진면의 토압과 터널 천단상부의 종방향 하중전이 특성을 실험적으로 규명하였다. 연구결과 굴진면에서 변위가 발생하면 굴진면 토압이 감소하고 터널의 천단 하중이 증가하며, 굴진면의 토압변화량에 따라 터널 천단상부의 하중전이의 크기와 발생경향이 변화되었다. 따라서 굴진면의 토압변화가 터널 종방향 하중전이에 직접적인 영향을 주는 것을 알 수 있었다. 지표경사가 작으면 하중전이 영역이 넓어지며 지표경사가 커질수록 종방향으로 전이되는 경향이 감소하고 굴진면 부근에서 집중되었다. 또한, 굴진면의 변위형태에 따라 종방향으로 전이되는 하중의 분포경향도 달라지므로 종방향 지반의 응력조건과 굴진면의 변위형태는 터널 종방향 하중전이의 형태와 크기에 영향을 주는 것으로 분석되었다.

• 대한조선학회논문집
• /
• 제55권3호
• /
• pp.252-264
• /
• 2018

The calculation of steady-state cavitating flows around Supercavitating Underwater Bodies (SUB's), which consist of a circular disk head (cavitator), a conical fore-body, a cylindrical middle-body and either a boat-tail or a flare-tail, are carried out. To calculate the axisymmetric cavitating flow, used is a commercial computational fluid dynamics code based on the finite volume method, Fluent. From the analysis of numerical results, the cavity and drag, affected by the fore-body and tail of the SUB's, are investigated. Firstly, the effect of the fore-body shape is investigated with the same disk cavitator and a cylindrical rear-body of fixed diameter. Then with the same cavitator and a fixed fore-body, the effect of the rear-body shape is investigated. Before the cavity generated by the cavitator covers the slant of fore-bodies sufficiently, the larger the cone angle of the fore-body(i.e., the shorter the slant length), the larger the drag and the slower the development of cavity. After the cavity covers the fore-body completely so that the pressure drag component of the body is vanished, the characteristics of drag-velocity curves are identical. Also, as the tail angle is bigger, the cavity generated by the cavitator is suppressed further and the drag becomes larger. The peak of the drag appears for the flare-tail, i.e., when the tail angle is positive(+). On the contrary, the trough of the drag appears for the boat-tail, i.e., when the tail angle is negative(-). When the tail angle is 5 degrees, the peak of the drag appears at the body speed of 80m/s and the value of the drag is 43% larger than that at the design speed of 100m/s. When the tail angle is -5 degrees, the trough of the total drag appears at 75m/s and that drag is 30% smaller than that of the cavitator, which means the rest of the body has a negative drag.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.237-245
• /
• 2012

Objective: The aim of the study is to analyze female adult's body shape characteristics and to provide the basic information for clothing manufacturing. Background: The comparative study among the age groups is very fundamental to understand the body characteristics of each subjects group. Therefore, comparison of body measurements in age groups was applied in this study. Method: The study was fulfilled by the comparison between the data of the $5^{th}$ Anthropometry of Size Korea (2004) and the $6^{th}$ Anthropometry of Size Korea(2010). The subjects were 2,213 female adults aged 20~59 of the 5th Size Korea anthropometric survey and 2,025 female adults aged 20~59 of the 6th Size Korea anthropometric survey. Results: The differences indicated the decreased values in widths, depths, girths regarding the torso region and BMI. "Head height to Stature ratio" decreased significantly in the 6th data, on the other hand, "Crotch height to Stature ratio" increased in the 6th data. Through the distribution characteristic of the age groups by Stature groups, it was convinced that 160cm stature group is the most frequent among all age groups of the 6th Size Korea. Conclusion: As a summary, the meaningful differences were showed between the 5th anthropometric data and the 6th data. According to the 6th Size Korea, the distribution tendency of obesity is very similar to the 5th Size Korea data. But the percentage of obese women declined significantly. Application: These findings from the study can be utilized women's wear design and construction that reflect body characteristics.

• 복식문화연구
• /
• 제20권5호
• /
• pp.621-634
• /
• 2012

With comparative analysis of running-type brassieres on the market about suitability for middle-aged women, this study is to provide basic data of running-type brassieres' pattern which is highly suitable. In the pursuit of this purpose, this study carried out wearing experiment targeting 3 middle-aged women with normal body shape which is 85B of chest circumference. The result is as follows. The significant difference was recognized in the breast. The products were rated in order of C>A>B>D, E, F, G>H by the observers, and C>B>D>A>F>E=G>H by the subjects. The significant difference was recognized in the armhole area. The products were ranked in the order of C, D>B, G, E>A, F, H by the observes and D, C>B>G>F>A>H by the subjects. The significant difference was also recognized in 6 categories(14~19) for the torso. According to the overall average values, the products were rated in the order of B, C, D>A, D, F, G by the observers and B=D>C>H>F>G>A>E by the subjects. The overall evaluation exhibited the significant difference. The products were ranked in the order of D>C>E>B>H>A>G>F by both observers and subjects. Therefore it was confirmed that the product D was appropriate in general. To conclude of comparative analysis about 8 kinds of running-type brassieres on the market, the average values of the product C and D in all categories had high marks for each category. The product C was comfortable and capable of covering the breast well, however, a gap was formed in outside-up part. The product D, made from lacy fabric, was very comfortable and well-fitted but there was inconsistency between the mold-cup and the breast shape.

• 한국지반공학회논문집
• /
• 제34권10호
• /
• pp.51-60
• /
• 2018

최근 해상 작업을 위한 새로운 시공기술로서 대형원형강재 가물막이 공법이 제안되었다. 본 구조물은 원형 형상의 가물막이이기 때문에 가물막이의 형상에 따른 침투해석 연구가 필요하다. 그러므로, 본 연구에서는 흐름해석을 수행하여 원형 가물막이에 대하여 벽체 내부로의 침투 유량을 산정하였다. 흐름해석에 이용된 수치모델링은 2열의 널말뚝을 가진 가물막이에 대하여 제안된 이론해와 비교하여 검증하였다. 흐름조건의 경우 축대칭 흐름조건의 침투유량이 2차원 흐름조건의 침투유량과 비교하여 1.55배 크게 나타났으므로 2차원 축대칭 흐름조건을 적용하였다. 벽체 반경, 벽체의 지중 근입깊이 그리고 벽체 내외부의 수위차 등을 변화시키며 변수연구를 수행한 결과, 침투유량은 벽체의 근입깊이와 벽체 반경이 증가할수록 감소하는 것으로 나타났다. 최종적으로, 대형원형강재 가물막이의 침투유량을 산정할 수 있는 간이식을 제안하였다.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.437-447
• /
• 2010

This study compares by gender the preference about ideal female height and body parts. Data was collected through a survey of 203 males and 236 females. The results are as follows: Males and females prefer 161~165cm as the ideal female height and 176~180cm as the ideal male height. In regards to the ideal height difference between couples, both males and females prefer males to be taller, with the head of the female at the same height as the neck of the male. Males and females prefer the shorter height than the ideal height of a fashion model and Miss Korea who got the prize from the korean beauty contest. In the case of Miss Korea, there has been a demand for tall women to participate in world beauty contests. However, this study shows that young people prefer a shorter height than the society expects. Males and females think the shoulder width is ideal when it is 2 times wider than the width of a face in regards to the preference of the ideal female body parts. There is a difference between males and females in the ideal breast size. Males prefer C-cup size while females prefer B-cup size. The ideal size of waist preferred is between 60~65cm to both males and females. The ideal shape of legs preferred to both males and females is a slightly muscular shape.

• International Journal of Automotive Technology
• /
• 제7권5호
• /
• pp.585-593
• /
• 2006

The effect of the shape of the side wall on vaporization and fuel mixture were investigated for the impinging spray of a direct injection(DI) gasoline engine under a variety of conditions using the LIEF technique. The characteristics of the impinging spray were investigated under various configurations of piston cavities. To simulate the effect of piston cavity configurations and injection timing in an actual DI gasoline engine, the parameters were horizontal distance from the spray axis to side wall and vertical distance from nozzle tip to impingement plate. Prior to investigating the side wall effect, experiments on free and impinging sprays for flat plates were conducted and these results were compared with those of the side wall impinging spray. For each condition, the impingement plate was located at three different vertical distances(Z=46.7, 58.4, and 70 mm) below the injector tip and the rectangular side wall was installed at three different radial distances(R=15, 20, and 25 mm) from the spray axis. Radial propagation velocity from spray axis along impinging plate became higher with increasing ambient temperature. When the ambient pressure was increased, propagation speed reduced. High ambient pressures tended to prevent the impinging spray from the propagating radially and kept the fuel concentration higher near the spray axis. Regardless of ambient pressure and temperature fully developed vortices were generated near the side wall with nearly identical distributions, however there were discrepancies in the early development process. A relationship between the impingement distance(Z) and the distance from the side wall to the spray axis(R) was demonstrated in this study when R=20 and 25 mm and Z=46.7 and 58.4 mm. Fuel recirculation was achieved by adequate side wall distance. Fuel mixture stratification, an adequate piston cavity with a shorter impingement distance from the injector tip to the piston head should be required in the central direct injection system.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.53-76
• /
• 1991

The study was designed to analyse the reorganization of the rabbit TMJ meniscus which was anteriorly displaced by surgery. The author compared the anteriorly displaced groups with control group. After surgical opening of the left rabbit TMJ space, cut the posterior attachment of the meniscus, and pushed it under the undercut area of the condyle head. Experimental groups were sacrificed by 1, 2, 4, 8 weeks after surgery. The samples were analysed with light microscope under T-B stain and electron microscope. The results were as follows: 1) The rabbit TMJ meniscus consisted of thick anterior and posterior band running different way, and comparative thin intermediate band runining antero-posteriorly. 2) Round oval shape chondrocyte-like cells were imbeded between the collagen fiber bundles and composed of proteoglycan granules, that showed metachromasia with toluidine blue, around the cell matrix. 3) Type II collagen fiber bundles in experimental group occured degenerative changes in organic patterns at 8 weeks, but those of type I collagen fiber bundles sustained longer, 4) The typical fibrocartilage of the rabbit TMJ meniscus was changed into fibrotic mode in process of time and showed the degenerative changes, which contained hyperplasia, calcification, resorption and hyalinization in the connective tissue. 5) The hyperplastic change of the synovial membrane in 4 week group and transitional change from fibrocyte to chondrocyte in cell type in 8 week group were observed. 6) The diameters of collagen fibers were diminished with the degenerative changes, the shape of the fibers became wavier and more nonorganic in running pattern and fiber bundle spaces widened.

• 치과방사선
• /
• 제18권1호
• /
• pp.193-201
• /
• 1988

The purpose of this study was to investigate the variation in the length and shape of styloid processes and the relationships between the elongated styloid processes and the styloid process syndrome, using panoramic radiogrpahs and questionaires. The subjects were 342 patients consisted of 170 males and 172 females aged from 11 to 78 years, not showing facial asymmetry, who visited infirmary of dental college of Yonsei University. Also, the accuracy was determined for measuring the length of styloid processes from panoramic radiographs, using dried skulls. The results were as follows: 1. The length of styloid processes was magnified approximately 1.1 times, but there was no statistically significant differencies in the magnification rate of length between right and left side. 2. The mean radiographic length of styloid processes was 29.72±7.92㎜ in males, 27.93±6.69㎜ in females, and 28.82±7.37㎜ in total. And elongated styloid process (>30㎜) was seen in 31.3% of total subjects. 3. The growth in the length of styloid processes was completed in the third decade. 4. The most common shape of styloid processes was straight followed by segmented and bent form. The incidence of segmentation was reduced with increasing age. 5. The 74% of subjects with elongated styloid process (>30㎜) showed symptoms of the styloid process syndrome. The most frequent symptom was headache followed by discomfort in the neck when turning the head from left to right, tinnitus or earache, vague facial pain, discomfort or pain when swallowing, feeling that an object is caught in throat.