• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.206.1-206.1
• /
• 2011

Recently, various developments in the area of small hydropower have being made and small hydro turbines are suitable for domestic use because it is a clean and renewable energy source. A small hydropower generator produces power by using the different water pressure levels in pipe lines and energy which was initially wasted by use of a reducing valve at the end of the pipeline is instead collected by a tubular-type hydro turbine in the generator. In this study, in order to acquire the performance of tubular-type hydro turbine applied, the output power, head, efficiency characteristics due to the different guide vane and runner vane angle are examined in detail. Moreover, influences of pressure and velocity distributions with the variation of guide vane and runner vane angle on turbine performance are investigated by using a commercial CFD code.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.576-581
• /
• 2002

The suspension is a structure that supports reading, writing head in information storage device. In order to develop the information storage device of high track density, it is necessary to study about the suspension. To satisfy operation condition of information storage device, the suspension shape is very important since it correlates to dynamic characteristics. Therefore, it is necessary to analyze the dynamic characteristics by using finite element analysis and to optimize the suspension of information storage device using size optimization and topology optimization. The suspension has various modes according to different kinds of frequency bandwidth. Sway mode and second torsion mode are especially critical among them. In this paper, we investigated method to improve bandwidth of sway and second torsion mode of HDD and ODD suspension by using size optimization and topology optimization.

• Ocean Systems Engineering
• /
• 제2권1호
• /
• pp.69-81
• /
• 2012

Presented herein is a study on reducing the hydroelastic response of very large floating structures (VLFS) by altering their plan shapes. Two different categories of VLFS geometries are considered. The first category comprises longish VLFSs with different fore/aft end shapes but keeping their aspect ratios constant. The second category comprises various polygonal VLFS plan shapes that are confined within a square boundary or a circle. For the hydroelastic analysis, the water is modeled as an ideal fluid and its motion is assumed to be irrotational so that a velocity potential exists. The VLFS is modeled as a plate by adopting the Mindlin plate theory. The VLFS is assumed to be placed in a channel or river so that only the head sea condition is considered. The results show that the hydroleastic response of the VLFS could be significantly reduced by altering its plan shape.

• 한국멀티미디어학회논문지
• /
• 제6권4호
• /
• pp.594-600
• /
• 2003

In this paper, we propose a detection method for facial features in color images with various backgrounds and face poses. To begin with, the proposed method extracts face candidacy region from images with various backgrounds, which have skin-tone color and complex objects, via the color and edge information of face. And then, by using the elliptical shape property of face, we correct a rotation, scale, and tilt of face region caused by various poses of head. Finally, we verify the face using features of face and detect facial features. In our experimental results, it is shown that accuracy of detection is high and the proposed method can be used in pose-invariant face recognition system effectively

• Fisheries and Aquatic Sciences
• /
• 제14권2호
• /
• pp.148-160
• /
• 2011

Thirty-one gross abnormalities that have been observed in tilapia are described: 10 fin, five eye, five jaw, four body shape, three head, two yolk sac, one operculum, and conjoined twins. Twenty-one have been described in published papers; the others were obtained from a survey. Breeding experiments revealed that three were heritable, while six were not heritable. Five could be caused by a bacterial infection, and one could be produced by a fungus. Four deformities were in offspring of males that had been injected with methyl methane sulphonate. Three were produced when sperm was treated with methyl methane sulphonate. Six were observed during sex reversal studies, and one was found following heat shock of fertilized eggs. Three were observed in polluted river water. The cause of other deformities is not known.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.75-81
• /
• 2000

Experimental studies on the characteristics of annular jet pump were carried out in this paper. The effects of high pressure chamber on the characteristics of annular jet pump were sought in this paper. Experiments were done for three shapes of high pressure chamber, and for several lengths of the high pressure chamber. Three types of the high pressure chamber's entrances($90^{\circ}$ single inflow, $45^{\circ}$ single inflow, and $45^{\circ}$ double inflow) were tested. Water was used for both the primary fluid and secondary fluid. The results obtained in this study are as follows; $45^{\circ}$ double inflow type is the most effective among the tested three types of the high pressure chamber's entrances. The efficiency of jet pump with 400mm of high pressure chamber length is the highest among the chamber lengths tested in this study, thus indicating appropriate chamber length is required to get an efficient jet pump.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.62-65
• /
• 2003

VLM-ST process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. In this present work, a novel rapid prototyping (RP) process, as an automatic VLM-ST (VLM-STA), has been proposed to improve building efficiency of VLM-ST process and reliability of products. The apparatus of VLM-STA is designed to embody the process. Several characteristics of the proposed process and the apparatus are discussed. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston and a human head shape, are fabricated on the apparatus.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1836-1839
• /
• 2003

This paper describes the surface polishing characteristics of a flat and free surface ferromagnetic substance(SM45C) that magnetic abrasive polishing processed. The effects of the various working factors on the surface roughness are clarified by experiments respectively, such as magnetic flux density. rotation speed of magnetic head. working gap, feed rate of workpiece. diameter of magnetic abrasives. and shape of workpiece. On the basis of these experiments, the polishing mechanism is discussed and the characteristics of the polishing process are described. In addition, it is found experimentally that die ＆ mold surfaces are also polished precisely by this process

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.559-564
• /
• 2001

In order to apply into a compact and reliable centrifugal blood pump, this paper introduces a self-bearing motor in which a rotor is rotated without contact. The rotor is actively controlled in only radial directions, while the axial and tilting motions are passively stable owing to the disk-shape structure of the rotor. A prototype was made in outer-rotor type that is far better in the compactness than inner-rotor type. The prototype could be driven up to 8000 rpm with the rotor vibration under 0.12mm. The maximum cardiac output and pressure head were 9 L/min and over 200 mmHg, respectively. These experimental results show that the proposed self-bearing motor has sufficient performance for application to a real blood pump.

• Archives of Reconstructive Microsurgery
• /
• 제23권1호
• /
• pp.8-12
• /
• 2014

Purpose: The success rate of free flap operation has shown a recent increase. Especially for breast reconstructive patients, aesthetic results are considered a necessity. However, for patients who underwent reconstruction in parts of the body other than breast, for example, head and neck, lower and upper extremities, aesthetic considerations are underscored. Nowadays, however, aesthetic standpoint toward these patients is changing. Materials and Methods: We conducted a retrospective review of 8 patients who underwent secondary procedures after free flap surgery from March of 2011 to April of 2014. Results: Secondary refinement was a safe and less time-consuming technique for maximizing the function and aesthetic appearance for the patient. Conclusion: Appearance has become increasingly important with regard to function and quality of life. Therefore, for free flap reconstructive patients, secondary refinements may be considered in order to change the shape and contour. The secondary refinements are critical to the final result and must be a planned part of the entire reconstructive sequence.