• The Journal of Korean Physical Therapy
• /
• v.7 no.1
• /
• pp.21-31
• /
• 1995

This study was described the movement patterns when rising from supine to erect stance. Two hundred eighty seven subjects, ranging in age from 6 year to 28 were filmed while rising from a supine position. Movement Patterns were classified using categorical descriptions of the action of three body regions-the upper and lower extremity, head-trunk region. This study was designed to determine whether within the rising task the movement patterns of different regions of the body vary with age level and sex. The incidence of each movement pattern was calculated and graphed with respect to age level and sex. The most common form of rising for subject in the 6, 7 year mate group usually involved push and reach pattern with upper extremity, half kneel pattern with lower extremity, partial rotation pattern with head-trunk. In the 6, 7 year female group usually involved symmetrical push pattern with upper extremity, symmetrical squat with balance step pattern with lower extremity, symmetrical interrupted by rotation pattern with head - trunk. In the teenage and twenties both sex group usually involved symmetrical push pattern with upper extremity, symmetrical squat pattern with lower extremity, partial rotation pattern with head-trunk.

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.73-84
• /
• 2003

This study was performed to find out how much projection errors in the cephalometric measurements were made by vertical head rotation in taking posteroanterior cephalograms. 25 adults without any apparent facial asymmetry or severe sagittal skeletal discrepancy were selected and the posteroanterior cephalograms were taken with the head rotated $5^{\circ},\;10^{\circ}$ superior and inferior each to the reference $position(0^{\circ})$. The 7 height, 5 width and 6 angular measurements were taken at each 5 positions. Through the statistical analysis of all measurements taken at each rotated position, folowing results were obtained.1. The projection errors of height measurements were remarkably target than those of width or angular measure nents. f. Among the height measurements, the farther to the rotation axis the measurements were, the larger the projection errors were. 3. Among the width measurements, mandibular width and mandibular width of mandibular first molars showed significant differences between the values taken at each rotated position, while nasal width, maxillary width and intermolar width of maxillary first molars did not. 4. Among the angular measurements, the angle between horizontal reference line and the line that is connected to crista galli and antegonion or maxillare showed significant differences between the values taken at each rotated Position. The above results suggest that it is needed to the effort to keep constant head position for taking the useful posteroanterior cephalogra, because projection errors are caused by vertical head rotation.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.6
• /
• pp.401-407
• /
• 2018

PURPOSE. When performing an occlusal procedure, it is recommended that the patient should be sitting straight with the head in a natural position. An inappropriate mandibular position caused by an incorrect occlusal record registration or occlusal adjustment can result in damaged teeth and cause functional disorders in muscles and temporomandibular joints. The purpose of this study was to clarify the influence of horizontal cephalic rotation on mandibular position by investigating the three-dimensional positions of condylar and incisal points. MATERIALS AND METHODS. A three-dimensional jaw movement measurement device with six degrees of freedom (the WinJaw System) was used to measure condylar and incisal points. The subjects were asked to sit straight with the head in a natural position. The subjects were then instructed to rotate their head horizontally $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, $40^{\circ}$, $50^{\circ}$and $60^{\circ}$ in the right or left direction. RESULTS. The results indicated that horizontal cephalic rotation made the condyle on the rotating side shift forward, downward, and toward the inside, and the condyle on the counter rotating side shift backward, upward, and toward the outside. Significant differences in deviations were found for angles of rotation higher than $20^{\circ}$. The incisal point shifted in the forward and counterrotating directions, and significant differences were found for angles of rotation higher than $20^{\circ}$. CONCLUSION. The mandibular position was altered by horizontal cephalic rotations of more than $20^{\circ}$. It is essential to consider the possibility of deviation of the mandibular position during occlusal procedures.

• Physical Therapy Korea
• /
• v.30 no.3
• /
• pp.237-244
• /
• 2023

Background: The external rotation (ER) exercise in performed at a 90° abduction of the shoulder joint is an effective to strengthen the infraspinatus. However, failure of the humeral head to control axial rotation during exercise can be increased the posterior deltoid over activity. Biofeedback training is an effective method of promoting motor learning and control it could look forward to activate the infraspinatus selectively by controlling the humeral head during exercise. Objects: The aim of this study was investigated that whether biofeedback for axial rotation was effective to activate selectively the infraspinatus during ER exercise. Methods: The 15 healthy males participated, and all subjects performed both ER exercise in a sitting position with shoulder abducted 90° under conditions with and without axial rotation biofeedback. Exercise was performed in a range of 90° ER, divided into three phases: concentric, isometric, and eccentric. The infraspinatus and posterior deltoid muscle activity were observed using surface electromyography. Results: Both infraspinatus activity (p < 0.01) and infraspinatus to posterior deltoid activity ratio (p = 0.01) were significantly higher with biofeedback however, posterior deltoid activity was significantly lower with biofeedback (p = 0.01). The infraspinatus muscle activity and muscle activity ratio were the highest in the isometric contraction type, and there were significant differences for all contraction types (p < 0.05). Whereas, the posterior deltoid activity was the lowest in the isometric contraction type, and showed a significant difference between isometric and other two contraction types (p < 0.05), but no significant different between concentric and eccentric contraction. Conclusion: Our results indicate that the axial rotation biofeedback during sitting ER exercise might be effective method to activating selective infraspinatus muscle and recommended to enhance the dynamic stability of the shoulder joint.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.10-15
• /
• 2014

Motion Analysis of pedestrian headform was first applied in this paper for the purpose of determining the relationship between stiffness of hood and HIC. Since the analysis of headform movement involves rotation, it has been problematic if analysis of the headform movement is made in local coordinate system only. Correlation of test and simulation is expected to be enhanced through the development of New type of Head Movement Analysis Method.

• Korean Journal of Head & Neck Oncology
• /
• v.32 no.2
• /
• pp.79-83
• /
• 2016

Chyle fistula is one of the complications of neck dissections. Although immediate surgical repair seems to be the best choice when chyle leakage is observed during the operation, some operators can be embarrassed when chyle leakage is heavy and not controlled during surgery. In this case, chyle leakage was occurred after extensive resection of lymph nodes in left level IV, and was not controlled in any way. The clavicular head of sternocleidomastoid muscle was dissected and inferior-based muscular flap was rotated to cover the suspected region of fistula orifice. Amount of drainage was checked less than 20 ml per day in the following days, and drain tube was taken out on the 3rd postoperative days. We present the technique using the inferior based sternocleidomastoid muscle flap for intraoperative management of chyle leakage not easily controlled.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.3
• /
• pp.217-223
• /
• 2020

Objective: The purpose of this study was to analyze the effect of postural sway on the kinematic variables of the putter head during golf putting and to provide information to the importance of postural sway control in the putting stroke for novice golfers. Method: The center of pressure (CoP) and Kinematics variables of the putter head were calculated during 2 m flat golf putting using 8 motion capture cameras (250 Hz) and 2 force plate (1,000 Hz). SPSS 24.0 was used to perform Pearson's correlation coefficient and simple regression analysis, and the statistically significance level was set to .05. Results: As a result of analyzing the correlation between CoP variables and the putter head rotation angle, the CoP moving length, CoP moving range (ML direction), and CoP moving velocity (ML direction) showed a positive correlation with the putter head rotation angle (yaw axis) and were statistically significant. Conclusion: Therefore, In order to perform the accurate putting stroke maintaining the ball's directionality, it is determined that it is important to control posture sway in the ML directions by minimizing the movement and velocity of the CoP.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.83-88
• /
• 2007

The purpose of this study was to investigate the ball velocity changes depending on the different linear momentum of putter head. For this study, two different moving conditions(25cm free fall and 35cm free fall) of putter head were set. And two different types of ground conditions were used which are artificial grass green($180cm{\times}600cm{\times}1cm$) and glass green($40cm{\times}130cm{\times}1cm$). Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. Ball and putter head velocities were calculated by the First Central Difference Method(Hamill & Knutzen, 1995). Linear momentum of ball and putter head were calculated with mass and its velocities. Before impact, the velocity of the putter head of 35cm free fall was about 30% greater than that of the putter head of 25cm free fall. Linear momentum of putter head of 35cm free fall was about 0.355-0.364kg m/s and 25cm free fall was 0.251 kg m/s. After impact, putter head lost its linear momentum about 14-19% and adjusting time of putter head after impact would be 0.1 second. After 0.1 second, putter moved the route same as before impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Ball velocities struck by 35cm free fall were 30 % faster than 25cm free fall. Linear momentum of ball struck by putter head was greater than that of expected amount because the moving ball has translational energy and rotational energy. Future study must treat three things. One is ball must struck by the different putters with different materials. Another is two-piece ball and three-piece ball should be used for the same condition studies. The other is height of center of rotation of club should be changed. In this study, the height of center of rotation of club head is 71cm from the ground. But recently many golfers used the long putter. Therefore next study should apply the different height of center of rotation of club head.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.19 no.2
• /
• pp.1-9
• /
• 2013

Background: The purpose of this study is to analysis of correlation upper body according to forward head posture. Methods: The subjects of this study were 40 female university students who were equally and randomly allocated to a forward head posture group, normal group. Using general posture system, electromyograph, visual analogue scale, tape measurement, neck disability index were evaluated. Results: There was positive correlation between posture analysis and Sternocleidomastoid, neck flexion (p<.05). There was positive correlation between Craniovertebral angle (CVA) and trapezius upper, VAS (p<.05). There was negative correlation between posture analysis and CVA (p<.05). There was negative correlation between Cranial rotation angle and CVA (p<.05). Conclusion: Increased forward head posture lead to increase of pain, muscles activity, so it suggests to be necessary on the prevention of dysfunction and limited activities daily living.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.293-300
• /
• 2011

This study was to find out the effect of cervical and thoracic stretching and strengthening exercise program on forward head posture. 32 adults had forward head posture were selected as the subjects for the study. The training program of the exercise group(n=16) consist of postural education with exercise program, subjects in the control group(n=16) participated in a postural education only. Postural measurements of Craniovertebral Angle(CVA) and Cranial Rotation Angle(CRA) were obtained from the using x-ray and PACS(Picture Archiving and Communications System) ${\pi}view^{TM}$. The results were compared with change of CVA and CRA exercise group were significant(p<.05) compared to the control group. However CRA of contol group was significant(P<.05). Also, there were no significant difference(p>.05) between groups on any pre-test measure. however there were significant difference(p<.05) between groups on CVA and CRA post-test measure. This study showed that cervical and thoracic stretching and strengthening exercise program can improve spinal posture alignment for decreasing forward head posture in subjects. These results can be fundamental data for further development of exercise program in interventions of postural improvement.