• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권2호
• /
• pp.193-200
• /
• 2000

자연스러운 사용자 작업 환경인 헤드 제스처 인터페이스를 구현하기 위해서는 얼굴 영역 추출에 관한 연구가 선행되어야 하는데, 최근에는 동영상에서 얼굴 영역을 추출하기 위해 색상 정보를 이용하는 연구가 많이 진행되고 있다. 본 논문에서는 대표적으로 사용되는 HSI 컬러 모델과 YIQ 컬러 모델의 각 색상 성분인 H(hue)와 I(in-phase)를 이용하여 얼굴 영역의 추출 성능을 비교한다. 먼저 각 색상 성분에 대해 임계 구간 변화에 따른 최적의 얼굴색 구간을 설정하여 얼굴 영역 추출의 정확도를 비교한다. 다음으로 설정된 최적의 얼굴색 정보와 움직임 정보를 결합한 영상에 대해 얼굴 박스를 추출함으로써 최종적인 얼굴 영역 추출의 정확도를 비교 평가한다. 실험 결과, 최적의 얼굴색 정보를 표현하는 구간은 HSI의 H 성분의 경우 $0^{\circ}{\sim}14^{\circ}$, YIQ의 I 성분은 $-22^{\circ}{\sim}-2^{\circ}$인 것으로 나타났다. 이 최적 구간에 의한 각 색상 성분의 얼굴 영역 추출의 정확도에서는 I 성분이 H 성분에 비해 약 10% 정도 높은 추출율을 나타냈으며, 최적의 얼굴색 정보와 움직임 정보를 결합한 영상의 경우에서도 I 성분이 약 3% 정도의 보다 나은 얼굴 영역 추출 결과를 얻었다.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.321-329
• /
• 2022

Tunnel site where high water pressure is applied, such as subsea tunnel, generally selects the shield TBM (Tunnel Boring Machine) to maintain the tunnel excavation face. The shield TBM has cutters installed, and the cutters wear out during the process of excavation, so it should be checked and replaced regularly. This is called CHI (Cutterhead Intervention). The conventional CHI under high water pressure is very disadvantageous in terms of safety and economics because humans perform work in response to high water pressure and huge water inflow in the chamber. To overcome this disadvantage, this study proposes a new method to dramatically reduce water pressure and water ingress by injecting an appropriate grout solution into the front of the tunnel face through the shield TBM chamber, called New Face Grouting Method (NFGM). The tunnel model tests were performed to determine the characteristics, injection volume, and curing time of grout solution to be applied to the NFGM. Model test apparatus was composed of a pressure soil tank, a model shield TBM, a grout tank, and an air compressor to measure the amount of water inflow into the chamber. The model tests were conducted by changing the injection amount of the grout solution, the curing time after the grout injection, and the water/cement ratio of grout solution. From an economic point of view, the results showed that the injection volume of 1.0 L, curing time of 6 hours, and water/cement ratio of the grout solution between 1.5 and 2.0 are the most economical. It can be concluded that this study has presented a method to economically perform the CHI under the high water pressure.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.456-463
• /
• 2007

It is important to improve the initial launch conditions of golf ball at impact between golf club and ball to get a long flight distance. The flight distance is greatly influenced by the initial launch conditions such as ball speed, launch angle and back spin rate. It is also important to analyze the mechanism of ball spin to improve the initial conditions of golf ball. Back spin rate is created by the contact time and force. Previous studies showed that the contact force is determined as the resultant force of the reaction forces normal and tangential to the club face at the contact point. The normal force causes the compression and restitution of ball, and the tangential force creates the spin. Especially, the tangential force is known to take either positive or negative values as the ball rolls and slides along the club face during impact. Although the positive and negative tangential forces are known to create and reduce the back spin rate, respectively, the mechanism of ball spin creation has not yet been discussed in detail in the literature. In this paper, the influence of the contact force between golf club and ball is investigated to analyze the mechanism of impact. For this purpose, the contact force and time at impact between golf club head and ball are computed using FEM and compared with previous results. In addition, we investigate the impact phenomenon between golf club head and ball by FEM and clarify the mechanism of ball spin creation accurately, particularly focusing on the effect of negative tangential force on ball spin rate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1017-1022
• /
• 2007

It is important to improve the initial launch conditions of golf ball at impact between golf club and ball to get a long flight distance. The flight distance is greatly influenced by the initial launch conditions such as ball speed, launch angle and back spin rate. It is also important to analyze the mechanism of ball spin to improve the initial conditions of golf ball. Back spin rate is created by the contact time and force. Previous studies showed that the contact force is determined as the resultant force of the reaction forces normal and tangential to the club face at the contact point. The normal force causes the compression and restitution of ball, and the tangential force creates the spin. Especially, the tangential force is known to take either positive or negative values as the ball rolls and slides along the club face during impact. Although the positive and negative tangential forces are known to create and reduce the back spin rate, respectively, the mechanism of ball spin creation has not yet been discussed in detail in the literature. In this paper, the influence of the contact force between golf club and ball is investigated to analyze the mechanism of impact. For this purpose, the contact force and time at impact between golf club head and ball are computed using FEM and compared with previous results. In addition, we investigate the impact phenomenon between golf club head and ball by FEM and clarify the mechanism of ball spin creation accurately, particularly focusing on the effect of negative tangential force on ball spin rate.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.24-36
• /
• 2007

Purpose: Direct anthropometry is an ideal method for preoperative planning and postoperative evaluation in plastic surgery, but it requires highly skilled specialty. Indirect anthropometry, especially photogrammetry, is an alternative method. In photogrammetry, standardized clinical photography is essential. Photogrammetry-based standardized clinical photography has several advantages over direct anthropometry. It is easier to measure and has less chance to make errors during measurement. Furthermore, it is possible to repeat measurements, and available for follow up study based on permanent custody. But, it is still different from actual measurement, and inherently less accurate than anthropometry. Methods: The authors revised the standardized clinical photography and then, carried out photogrammetry using Photoshop(Adobe, U.S.A.), and compared each data with those of anthropometry. The subjects were 50 males and 50 females, undergraduate medical students in twenties. Standard head position was obtained from the wire, fixed to cephalostat which indicates the Frankfort horizontal plane. All photographs were taken at the same situation such as fixed position of light, subject and camera, etc. Results: Total 96 measurements, based on 40 landmarks, consist of linear measurements, angular measurements and inclinations include 3 measurements in head, 22 in face, 15 in orbit, 28 in nose, 16 in lip and mouth, and 12 in ear. Conclusion: Normal photogrammetric data of face of Korean in twenties was obtained. Reliable photogrammetric measurements, not significantly different from anthropometric measurement statistically, accounted for 44 in 96 measurements(45.8%). Anthropometric values different from those of photogrammetric values were obtained by multiplying coefficient by photogrammetric value.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권1호
• /
• pp.17-25
• /
• 1996

There are many reports of the surgical management for the craniofacial abnormalities arising from the irradiation of the head and face for treatment of childhood cancers. Since the mordern combined-modality theraphy for childhood cancers began in the late 1960s and the early 1970s, recent reports have described the occular, dental and maxillo-facial abnormalities after irradiation in long-term survivors of cancers of the head and face. The resultant deformities may be known to be difficult to reconstruct with surgical techniques. This paper describes the late reconstructive surgery for the unilateral orbital and malar hypoplasia after eyeball enucleation and irradiation during childhood to correct the facial asymmetry and expand the contracted orbital socket into the functional dimension for the retaining eyeball prosthesis with spherical implant. We reports the satisfactory preliminary results from the midfacial osteotomy through the supero-lateral orbital rim and malar bone and the antero-lateral repositioning with the autogenous bone grafting in 26 year-old female patient who will be planned to make the new eyeball prosthesis by the department of ophthalmology.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권1호
• /
• pp.22-33
• /
• 2005

본 논문에서는 얼굴 형태와 유사한 타원체형 모델의 가변적 블록크기를 기반으로 하는 영상정렬 알고리즘을 제안한다. 블록정합 수행 시 좌우 곡률만을 고려한 기존의 실린더형 원형모델 방법은 좌우 영상에 대하여 정확한 정렬을 수행하지만 상하 영상에 대해서는 사람의 두상모양이나 턱 구조의 특징을 반영하지 않았기 때문에 정렬오류가 발생한다. 본 논문에서 제안한 알고리즘은 타원체형 얼굴 모델의 상하 좌우의 곡률에 따라 가변적인 블록크기를 사용하는 블록정합 알고리즘으로서 영상의 상관관계를 이용하여 정확한 정렬을 할 수 있다. 그리고 정렬된 영상으로부터 얼굴 텍스쳐 영상을 생성하기 위하여 영상 모자익 기법을 사용한다. 이때 중첩된 영역에 따라 선형적인 가중치를 부여하여 영상을 스티칭하고 부분적으로 나타나는 고스트 효과를 제거함으로써 더 실감 있는 텍스쳐를 생성한다.

• Archives of Plastic Surgery
• /
• 제32권6호
• /
• pp.760-762
• /
• 2005

Synovial Sarcoma is the fourth most common sarcoma, accounting for 8-10 % of all sarcomas. Synovial sarcoma is highly malignant tumor of mesenchymal origin but rarely occurres in head and neck area. Less than 100 cases of synovial sarcoma occurring in head and neck area have been reported all over the world. Pathologically, there is two type of synovial sarcoma: monophasic variant is composed of only one cell type and "classic" (biphasic) synovial sarcoma has two cellular component, a spindle cell(fibrosarcoma-like) component and a pseudoepithelioma component. Recommended treatment is wide resection with negative margins. The role of chemotherapy and radiation therapy is controversial. We experienced a 42-year-old male patient with slowly enlarging, deep seated mass on right cheek. In the first operation, we suggested that the mass maybe benign tumor. But, initial excisional biopsy specimen of the primary lesion was consistent with synovial sarcoma. The final diagnosis was monophasic synovial sarcoma which was composed of spindle cells. Radical resection was performed two months later because remnant tumor was found on follow up MRI. No further treatment was done. There were no recurrence or metastasis on follow up MRI, chest CT and whole body bone scan after 15 months. This is a report of a rare case of synovial sarcoma of the face with a literature review.

• 한국의류산업학회지
• /
• 제25권6호
• /
• pp.732-738
• /
• 2023

This study delves into the realm of upcycling beauty design by repurposing discarded CDs, magazines, and fabrics. The study outlines a meticulous process for transforming waste into beauty designs. We created three upcycling beauty design works as part of this investigation. The first creation, called Silver Leaf, uses the silver section of CDs to craft leaves and stems. Achromatic colors are used as makeup to achieve cyber-inspired imagery. After carrying out silver-gray eye makeup, the lips were completed by affixing a CD component. The second creation is a firebird crafted by cutting or folding fashion magazines to create essential items. The colorful firebird image was completed using vivid color makeup of shades such as red and yellow. After proceeding with red eye makeup, the lips were completed by cutting and pasting magazine cutouts. The third piece is a spring flower, which involved selectively cutting lace patterns to complete a beauty design extending from head to face. The colors are spring-themed and encompass pink, yellow, and blue. Pink, blue, and green eyeshadows were applied on the lace, attached from head to face, chest, and lips. This study advocates for the prospect of upcycling beauty design using sustainable materials by repurposing waste resources. It also introduces the possibilities of creative activities in this field through upcycling. The study aims to play a role in changing the perception of environmental conservation, a concern of our times, through the use of sustainable resources.

• 한국콘텐츠학회논문지
• /
• 제15권11호
• /
• pp.313-321
• /
• 2015

Hip FAI 진단과 수술 계획 시 Hip FAI MRI 검사시 3D 영상을 추가로 활용하여 CT 영상으로 이루어지는 Hip Clock face 영상을 MRI 3D 영상으로 대체할 수 있는지 비교 평가 하였다. Hip 자기공명 영상검사(MRI)와 3D Hip 컴퓨터 단층 촬영(CT)을 동시 시행한 환자 31명 (남: 21명 평균연령: 35세 여: 10명 평균연령: 40.3세)을 대상으로 분석하였으며, 영상평가는 정형외과 전문의 1명과 영상의학과 전문의 1명이 MR과 CT modality에서 Hip joint articular transverse ligament의 6 o'clock을 중심으로 Superior을 12 o'clock, Labrum의 전면을 3 o'clock, 반대쪽을 9 o'clock로 기술하는 Clock face을 재구성 한 후 11 o'clock에서 A. retinacular vessel, B. head neck junction, 12 o'clock A. Epiphyseal line, B. Cam lesion, 1,2,3,4 o'clock의 Cam lesion, Posterior Cam lesion확인 여부를 리커트(Likert scale) 5점 척도로 평가하였다(Independent t-test p<0.05). 리커드 척도 결과 11 o'clock A. retinacular vessel MR 평균 값 $3.69{\pm}1.0$, CT 평균값 $2.8{\pm}0.78$이며 통계적으로 유의하였다(p<0.001). B. head neck junction은 두 평가자간 차이가 없었다(p<0.416). 12 o'clock A. Epiphyseal line MR 평균값 $3.54{\pm}1.00$, CT 평균값 $4.5{\pm}0.62$이었다(p<0.000). B. Cam lesion은 두 평가자간 차이가 없었다(p<0.532). 1,2,3,4 o'clock 의 Cam lesion과 Posterior Cam lesion은 통계적으로 유의하지 않았다(p<0.656, p<0.658). weighted Kappa 검증 결과 11 o'clock A.retinacular vessel CT K값이 0.663으로 가장 낮은 일치도였으며, 각각의 평가 항목의 일치도 평가 결과 매우 높은 결과로 두 평가자간 높은 신뢰도를 보여주었다.