• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1085-1086
• /
• 2008

Shunt active filter can compensate harmonic current of utility results from non-linear loads such as rectifiers, cycloconverters and arc furnaces. It has the same structure as photovoltaic(PV) generation system. So, It was proposed the system that generates PV power and also has active filter function. It is called PV-AF(Photovoltaic and Active Filter) power generation system. Islanding can be occurred in an inverter based dispersed generation system, when the system disconnected from utility and loads are entirely supplied by PV system only. Islanding may result in interference to grid protection devices, equipment damage, and even personnel safety hazards. Therefore, islanding has to be detected and protected. The conventional anti-islanding methods have NDZ(None-Detection Zone) or power quality degradation. But PV-AF power generation system has the function of not only shunt active filter but also anti-islanding method without NDZ. In this paper, a novel anti-islanding method for PV-AF system is proposed and analysed in detail.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5537-5540
• /
• 2015

Purpose: To research the association between pre-treatment elevated platelet count and clinicopathologic characteristics in breast cancer (BC), as well as explore the relationship between pre-treatment elevated platelet count and HER2 status and prognosis of BC patients. Materials and Methods: A retrospective cohort of BC patients who were newly diagnosed or treated by surgery only and had pathological detection results and platelet values in the Department of Oncology, the First Affiliated Hospital of Liaoning Medical College were enrolled from 1/1/2008 until 31/12/2009, and followed up until 31/12/2014. Age, thrombocyte parameters before chemotherapy and/or radiotherapy, immunohistochemical (IHM) indexes, and regional lymph node (LN) involvement and progression-free survival (PFS) were recorded. Results: A total of 447 eligible subjects were included in this research. As we analyzed, for HER2, positive and negative, the incidence rates of elevated platelet count were 25.8% and 14.7% (P<0.05). In the Cox proportional hazards model both variables were independent risk factors for BC (for HER2, OR, 0.592, 95% confidence interval, CI, 0.355 to 0.985, P=0.044;f or PLT, OR, 0.998, 95% CI, 0.996 to 1.000, P=0.042). For ER, PR, Ki67 and LN involvement, the differences were not statistically significant (P>0.05). Conclusions: In this research, pre-treatment elevated level of platelet count demostrated a significantrelationship with HER2 amplification/overexpression, and both variables significantly influenced the prognosis of BC. However, elevated platelet count did not exhibit any association with ER, PR, Ki67 and LN involvement.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.146-155
• /
• 2015

Objectives: The aims of this study were to set up benzene exposure matrices according to industry and process and to assess the risk of those occupational exposure to benzene. Methods: The benzene exposure matrices were assembled depending on industry and process, based on an exposure database provided by KOSHA(the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. These exposure matrices were assessed by Hallmark Risk Assessment tool. Results: The benzene was treated 412 industries sector(36%), 2,747 business places, and 471 industrial processes according to database. The arithmetic mean of past decade 8 hours time-weighted average of airborne benzene concentrations in the workplace was 0.10722 ppm. 1.07% of the total sample were greater than OEL, and 59.8% were showed less than the limit of detection. The highest risk values(Danger Value) were seen 36 industries including manufacture of general paints and similar product and 12 processes, such as other painting of manufacture of metal fabricated members. Exposure matrices based on employee exposure data base may provide exposure histories and can be used in epidemiological studies. Conclusions: It was found that more attentions should be paid to 36 among 412 industries and 12 of 471 processes, with a higher risk value.

• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.674-682
• /
• 2015

The objective of this study was to evaluate the risk of illness from Campylobacter spp. on ham. To identify the hazards of Campylobacter spp. on ham, the general characteristics and microbial criteria for Campylobacter spp., and campylobacteriosis outbreaks were investigated. In the exposure assessment, the prevalence of Campylobacter spp. on ham was evaluated, and the probabilistic distributions for the temperature of ham surfaces in retail markets and home refrigerators were prepared. In addition, the raw data from the Korea National Health and Nutrition Examination Survey (KNHNES) 2012 were used to estimate the consumption amount and frequency of ham. In the hazard characterization, the Beta-Poisson model for Campylobacter spp. infection was used. For risk characterization, a simulation model was developed using the collected data, and the risk of Campylobacter spp. on ham was estimated with @RISK. The Campylobacter spp. cell counts on ham samples were below the detection limit (<0.70 Log CFU/g). The daily consumption of ham was 23.93 g per person, and the consumption frequency was 11.57%. The simulated mean value of the initial contamination level of Campylobacter spp. on ham was −3.95 Log CFU/g, and the mean value of ham for probable risk per person per day was 2.20×10⁻¹². It is considered that the risk of foodborne illness for Campylobacter spp. was low. Furthermore, these results indicate that the microbial risk assessment of Campylobacter spp. in this study should be useful in providing scientific evidence to set up the criteria of Campylobacter spp..

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.69-78
• /
• 2010

In this study, Fire Hazards were evaluated through computer simulation using FDS program for an apartment fire accident. The results of fire simulation showed that the maximum heat release rate in the case of no sprinklers activation was 7,700 kW which was about 16 times of that in the case of sprinklers activation, 497 kW and there was a very high fire hazard due to the backdraft phenomenon when the door of fire room was forced to open. Regarding the hazard time of fire room temperature and detection time of detectors, available evacuation time was 32.5 seconds of minimum to 53.5 seconds of maximum. In the case of sprinklers activation, fire hazard in the apartment was showed to be very low due to the fire control by the spray cooling of sprinklers. This study shows that what a important function for fire safety is the activations of fire sprinkler system and emergency alarm system and what a large loss can cause if these systems don’t activate in fire accidents.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.4
• /
• pp.643-646
• /
• 2006

Because of potential health hazards of aflatoxins for humans, the present study was conducted to monitor aflatoxin $B_1\;(AFB_1)$ in livestock feeds. A total of 249 samples of feeds collected in Korea were analyzed by DC-ELISA for qualitative analysis of $AFB_1$. Then, 27 samples that were verified to contain $AFB_1$ by DC-ELISA were quantitated by HPLC/FLD. HPLC/FLD analysis revealed that only one sample collected from a farm contained 11 ppb of $AFB_1$, whereas the other samples collected from feed companies did not contain $AFB_1$. The presence of $AFB_1$ was further confirmed by LC/MS analysis. TLC analysis indicated that the result of the DC-ELISA was most likely due to possible contamination of other mycotoxins rather than $AFB_1$. In conclusion, HPLC/FLD analysis following DC-ELISA is necessary for rapid and accurate detection of $AFB_1$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.452-458
• /
• 2007

Since there are very strong clutter returns in an airborne weather radar used for the detection of low altitude weather hazards, the reliable weather data cannot be extracted from the weak Doppler weather signal without cancellation of these strong clutter returns. However, the system phase noise spreads both the clutter and Doppler signal and causes the serious problems in the efficient clutter cancellation. Therefore, in this paper, the phase noise effects on the clutter and Doppler weather signal were analyzed. The system phase noise model was suggested and the effects were derived and explained using this phase noise model. It can be shown that there exists the limit in the clutter cancellation capability to improve the signal-to-clutter ratio (SCR) due to the system phase noise. It may be prominent especially in the low SCR situations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1173-1179
• /
• 2008

Since there are very strong clutter returns in airborne and ground weather radars used for the detection of low altitude weather hazards, the reliable weather data cannot be extracted from the weak Doppler weather signal without cancellation of these strong clutter returns. However, the clutter cancellation in Doppler frequency domain is not an easy task since even the fixed clutter returns not to mention the moving clutter can have Doppler shifts due to the antenna rotation and operational environment. Therefore, it was shown in this paper a simple array antenna system can be used for the efficient clutter cancellation in the spatial domain. The weather signal, various moving and fixed clutters were modelled and simulated to prove the performance of this adaptive array system. Also, the degree of accuracy in pulse-pair estimates of a weather radar was compared and analyzed from the simulated weather data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1492-1499
• /
• 2020

A weather radar system generally shows the weather phenomena related with rainfall and wind velocity. These systems are usually very helpful to monitor the relatively high altitude weather situation for the wide and long range area. However, since the weather hazards due to the strong hail and heavy rainfall occurring locally are observed frequently in recent days, it is important to detect these wether phenomena. For this purpose, it is necessary to detect the fast varying low altitude weather conditions. In this environment, the effect of surface clutter is more evident and the antenna dwell time is much shorter. Therefore, the conventional Doppler spectrum estimation method may cause serious problems. In this paper, the AR(autoregressive) Doppler spectrum estimation methods were applied to solve these problems and the results were analyzed. Applied methods show that improved Doppler spectra can be obtained comparing with the conventional FFT(Fast Fourier Transform) method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1180-1187
• /
• 2022

As the likelihood of occurrence of the localized microbursts or severe flooding is increased due to the unusual weather changes, it is the very urgent problem to detect these weather hazards with a local weather radar. For a local weather radar of this purpose, it is essential to detect the low altitude and the fast varying weather conditions. Therefore, the very fast update of the weather information and the efficient clutter removal is very important. To achieve this goal, the appropriate method should be applied which does not need the mechanical elevation scanning and has the capability of the efficient clutter removal. Therefore, in this paper, the usefulness of the implementation of elevational filter banks with the spatial FFT algorithm was analyzed and investigated using a simple array antenna. It is shown that the suggested method can be used for both the minimization of the ground clutter and the fast update of weather information.